UNIVERSAL COMPACT SENSORS
•Complete range of optic functions, basic, advanced and
laser class 1
•Models with coaxial optics for polarised retroreflex,
contrast and luminescence sensors
•Trimmer or EASYtouchTM setting with Remote, Keylock
and Delay functions
•Standard cable or M12 connection with standard NPN or
PNP configuration
The S60 series, standard 50x50x15 mm compact housing, offers all the most
advanced optic functions, as well as the universal, available with safety class 1
laser emission. The series presents a complete range of models, including
retroreflex with coaxial optics and polarisation filters for the detection of shiny
and/or transparent objects, background and foreground suppression, contrast
sensors with white light emission for the detection of coloured marks, the sensor
with UV emission for the detection of luminescence references and the distance
sensor with analogue output. The basic models for presence detection present
trimmer sensitivity adjustment, while the models with the advanced optics are
microprocessor controlled and have the patent-covered EASYtouch™ setting,
which gives rapid and precise setting of the switching threshold, with the
possibility of remote control, keyboard block and selection of the output delay
function. The S60 series offers versions with cable or M12 connection that can be
rotated for either straight or right-angle positions. All versions have NPN or PNP
output and standard configuration conforming to the EN 60947-5-2 standard.
S60 SERIES
MULTIFUNCTION OPTOELECTRONIC SENSORS
standard 50x50x15
DIMENSIONS
INDICATORS AND SETTINGS
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Connectors (A.03) and Fixing
Brackets (A.04) of the General Catalogue
Output status and
stability LEDs (receiver);
power on LED (emitter)
Adjustment trimmer (receiver)
M12 connector output
Cable output
A
A
B
C
C
C
D
D
THROUGH BEAM WITH INFRARED EMISSION
CONNECTIONS
Single-turn trimmer for sensitivity adjustment.
Rotate clockwise to increase the operating distance.
EMITTER RECEIVER
B
EMITTER
RECEIVER
2
A
G/F
S60-PA-5
S60-PA-2
A
The detection system with two
separate emitter and receiver units
allows the user to reach larger
operating distances. The trimmer,
present on the receiver, allows to
adjust sensitivity and to detect
objects that obscure, even partially,
the light emission. The IR emission
is modulated to avoid interference
with other light sources and can be
turned off to test the functioning
even without the object to detect.
0V -
(BLUE)
TEST +
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
TEST +
(BLACK)
0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
BROWN
WHITE
BLACK
NO OUTPUT
NC OUTPUT
NO OUTPUT
Vdc
Vdc
NC OUTPUT
BLUE
BROWN
WHITE
BLACK
BLUE
receiver - 2 m cable
S60-PA-2-F01-NN 956201490 NPN
S60-PA-2-F01-PP 956201330 PNP
emitter - 2 m cable
S60-PA-2-G00-XG 956201340
receiver - M12 connector
S60-PA-5-F01-NN 956201210 NPN
S60-PA-5-F01-PP 956201060 PNP
emitter - M12 connector
S60-PA-5-G00-XG 956201070
DETECTION DIAGRAMS
TECHNICAL NOTES
2Average life of 100.000 h with TA= +25 °C
3270 ° trimmer
4Emitter off with Test+ on Vdc and Test- on 0 V
5PVC, 4 x 0.14 mm2
8Internal lenses in Polycarbonate
0 5 10 15 20 (m)
Recommended operating distance
Maximum operating distance
20 m
18 20
TECHNICAL DATA
Operating distance: 0 ... 20 m
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤35 mA
Light emission: infrared LED 880 nm
Spot dimension: aprox. 200 mm at 4 m
Setting: sensitivity trimmer
Indicators:
yellow OUTPUT LED
green STABILITY LED
green POWER ON LED
Output type:
PNP, NO and NC
NPN, NO and NC
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 1 ms
Switching frequency: 500 Hz
Operating mode: dark on NO / light on NC
Auxiliary functions: Test + and Test -
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in PMMA
Weight:
90 g max.
40 g max.
Operating temperature: -25 ... +55°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2
1
3
4
5
6
7
8
2
S60-PA-2-F01-NN
S60-PA-2-F01-PP
S60-PA-2-G00-XG
S60-PA-5-F01-NN
S60-PA-5-F01-PP
S60-PA-5-G00-XG
6Connector can be blocked on two positions
Detection areaExcess gain
1 Limit values
7A - reverse polarity protection
B - overload and short-circuit protection on
receiver outputs
3
SELECTION TABLE
All the ordering codes and information are
summarised in the last pages of this catalogue
EMITTER
THROUGH BEAM WITH RED LASER EMISSION
DIMENSIONS
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Connectors (A.03) and Fixing
Brackets (A.04) of the General Catalogue
Output status and
stability LEDs (receiver);
power on LED (emitter)
Adjustment trimmer
(receiver)
M12 connector output
Cable output
A
B
C
D
CONNECTIONS
The high operating distance, typical
of the emitter and receiver system,
is notably increased thanks to the
use of visible red laser emission.
The laser beam can be easily
aligned and offers excellent
detection resolution of even small
objects. The class 1 laser
emission, according to EN
60825-1, guarantees maximum
safety for the operators in all
applications.
4
Single-turn trimmer for sensitivity adjustment.
Rotate clockwise to increase the operating distance.
Decrease sensitivity to increase resolution.
L-G/F
S60-PA-5
S60-PA-2
A
C
C
D
EMITTER RECEIVER
B
INDICATORS AND SETTINGS
A
A
NOT USED
BROWN
WHITE
BLACK
BLUE
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
Vdc
NC OUTPUT
0V -
(BLUE)
TEST +
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
NOT USED
(BLACK)
0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
NC OUTPUT
RECEIVER
DETECTION DIAGRAMS
TECHNICAL DATA
Operating distance: 0 ... 60 m
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤35 mA
Light emission: red Laser 650 nm
class 1 EN 60825-1
class II CDRH21 CFR 1040.10
Resolution:
aprox. 6 mm a 0.5 m
aprox.10 mm over 2 m
Setting: sensitivity trimmer
Indicators:
yellow OUTPUT LED
green POWER ON LED
Output type:
PNP, NA and NC
NPN, NA and NC
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 333 µs
Switching frequency: 1.5 kHz
Operating mode: dark on NO / light on NC
Auxiliary functions: Test +
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in PMMA
Weight:
90 g max.
40 g max.
Operating temperature: -10 ... +50°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2,
EN 60825-1, CDRH21 CFR 1040.10
1
3
4
5
7
6
8
2
S60-PL-2-F01-NN
S60-PL-2-F01-PP
S60-PL-2-G00-XG
S50-PL-5-F01-NN
S50-PL-5-F01-PP
S50-PL-5-G00-XG
TECHNICAL NOTES
1 Limit values
2Average life of 50.000 h with TA= +25 °C
3270° trimmer
4Emitter off with Test+ connected to +Vdc
Emitter on with Test+ not connected or
connected to 0V
5PVC, 4 x 0.14 mm2
SELECTION TABLE
6Connector can be blocked on two positions
8Internal lenses in glass and Polycarbonate
0 15 30 45 60 (m)
Operating distance
60
ResolutionDetection area
60 m
5
receiver - 2 m cable
S60-PL-2-F01-NN 956201570 NPN
S60-PL-2-F01-PP 956201420 PNP
emitter - 2 m cable
S60-PL-2-G00-XG 956201430
receiver - M12 connector
S60-PL-5-F01-NN 956201270 NPN
S60-PL-5-F01-PP 956201140 PNP
emitter - M12 connector
S60-PL-5-G00-XG 956201150
All the ordering codes and information are
summarised in the last pages of this catalogue
7A - reverse polarity protection
B - overload and short-circuit protection on
receiver outputs
POLARISED RETROREFLEX WITH RED EMISSION
DIMENSIONS
INDICATORS AND SETTINGS
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Reflectors (A.01), Connectors
(A.03) and Fixing Brackets (A.04) of the
General Catalogue
Output status and
stability LEDs
Adjustment trimmer
M12 connector output
Cable output
A
A
B
C
C
C
D
D
CONNECTIONS
Single-turn trimmer for sensitivity adjustment.
Rotate clockwise to increase the operating distance.
6
B
With retroreflex sensors the object
is detected when it interrupts the
light beam generated between the
sensor and its associated prismatic
reflector. High-polarisation optic
filters also allow reliable detection
of very reflective objects, such as
mirrored surfaces that, differently
from the prismatic reflector, reflect
the light beam without rotating the
polarisation plane.
B
A
S60-PA-5
S60-PA-2
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
NC OUTPUT
0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
NC OUTPUT
3 m
DETECTION DIAGRAMS
TECHNICAL NOTES
1 Limit values
7Internal lenses in Polycarbonate
2Average life of 100.000 h with TA= +25 °C
3270° trimmer
4PVC, 4 x 0.14 mm2
5Connector can be blocked on two positions
6A - reverse polarity protection
B - overload and short-circuit protection on
outputs
20 4 6 8 10 (m)
R2 6
8
6,5
TECHNICAL DATA
Operating distance: 0.1 ... 8 m (on R5)
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤40 mA
Light emission: red LED 660 nm
Spot dimension: aprox. 90 mm at 3 m
Setting: sensitivity trimmer
Indicators:
yellow OUTPUT LED
green STABILITY LED
Output type:
PNP, NO and NC
NPN, NO and NC
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 500 µs
Switching frequency: 1 kHz
Operating mode: dark on NO / light on NC
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in PMMA
Weight:
90 g max.
40 g max.
Operating temperature: -25 ... +55°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2
1
3
4
5
6
7
2
S60-PA-2-B01-NN
S60-PA-2-B01-PP
S60-PA-5-B01-NN
S60-PA-5-B01-PP
8 m
SELECTION TABLE
axial optics - 2 m cable
S60-PA-2-B01-NN 956201460 NPN
S60-PA-2-B01-PP 956201300 PNP
axial optics - M12 connector
S60-PA-5-B01-NN 956201180 NPN
S60-PA-5-B01-PP 956201040 PNP
All the ordering codes and information are
summarised in the last pages of this catalogue
Recommended operating distance
Maximum operating distance
R5 7
High efficiency reflectors can be used
to obtain larger operating distances.
Refer to Reflectors (A.01) of the
General Catalogue
7
Detection areaExcess gain
R2
R5
R2 R5
RETROREFLEX WITH RED LASER EMISSION
The visible red laser emission
increases the operating distance
and resolution of the polarised
retroreflex sensor. Specific R7 or
R8 reflectors with 0.8 mm micro-
prisms are available for high-
resolution detection of small
objects. The class 1 laser emission,
according to EN 60825-1,
guarantees maximum safety for the
operators in all applications.
DIMENSIONS
INDICATORS AND SETTINGS
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Reflectors (A.01), Connectors
(A.03) and Fixing Brackets (A.04) of the
General Catalogue
Output status and
power on LEDs
Adjustment trimmer
M12 connector output
Cable output
A
B
C
D
CONNECTIONS
8
Single-turn trimmer for sensitivity adjustment.
Rotate clockwise to increase the operating distance.
Decrease sensitivity to increase resolution.
L-B
S60-PA-5
S60-PA-2
B
A
A
C
C
D
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
NC OUTPUT
0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
NC OUTPUT
20 m
DETECTION DIAGRAMS
TECHNICAL NOTES
1 Limit values
2Average life of 50.000 h with TA= +25 °C
3270° trimmer
4PVC, 4 x 0.14 mm2
SELECTION TABLE
axial optics - 2 m cable
S60-PL-2-B01-NN 956201560 NPN
S60-PL-2-B01-PP 956201410 PNP
axial optics - M12 connector
S60-PL-5-B01-NN 956201260 NPN
S60-PL-5-B01-PP 956201120 PNP
All the ordering codes and information are
summarised in the last pages of this catalogue
TECHNICAL DATA
Operating distance: 0.1 ... 20 m
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤35 mA
Light emission: red Laser 650 nm
class 1 EN 60825-1
class II CDRH21 CFR 1040.10
Resolution: approx. 10 mm
Setting: sensitivity trimmer
Indicators:
yellow OUTPUT LED
green POWER ON LED
Output type:
PNP, NO and NC
NPN, NO and NC
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 250 µs
Switching frequency: 2 kHz
Operating mode: dark on NO / light on NC
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in PMMA
Weight:
90 g max.
40 g max.
Operating temperature: -10 ... +50°C
Storage temperature: -25 ... +70°C
Standard reference: EN 60947-5-2, EN 60825-1,
CDRH21 CFR 1040.10
1
3
4
7
6
5
2
S60-PL-2-B01-NN
S60-PL-2-B01-PP
S60-PL-5-B01-NN
S60-PL-5-B01-PP
0 5 10 15 20 (m)
Operating distance
R2
R7
20
15
Resolution on R7 reflectorDetection area
R2
R7
High efficienct reflectors can be used to
obtain larger operating distances. Refer
to Reflectors (A.01) of the General
Catalogue
5Connector can be blocked on two positions
6A - reverse polarity protection
B - overload and short-circuit protection on
outputs
7Internal lenses in glass and Polycarbonate
9
COAXIAL POLARISED RETROREFLEX WITH RED EMISSION
DIMENSIONS
INDICATORS AND SETTINGS
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Reflectors (A.01), Connectors
(A.03) and Fixing Brackets (A.04) of the
General Catalogue
Output status and
stability LEDs
Adjustment trimmer
M12 connector output
Cable output
A
B
C
D
A
C
C
D
CONNECTIONS
Single-turn trimmer for sensitivity adjustment.
Rotate clockwise to increase the operating distance.
10
B
The polarised retroreflex sensor
with a coaxial optics offers the best
resolution of the detection point as
the optic emitting axis coincides
with the optic receiving axis. The
coaxial system also allows to
reduce drastically the sensor’s
blind zone and consents the
detection of objects very close to
the sensor’s frontal lens.
B
A
S60-PA-5
S60-PA-2
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
NC OUTPUT
0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
NC OUTPUT
4 m
DETECTION DIAGRAMS
TECHNICAL NOTES
1 Limite values
2Average life of 100.000 h with TA= +25 °C
3270° trimmer
4PVC, 4 x 0.14 mm2
5Connector can be blocked on two positions
6A - reverse polarity protection
B - overload and short-circuit protection on
outputs
10 2 3 4 5 (m)
R2 33,2
TECHNICAL DATA
Operating distance: 0 ... 4 m
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤40 mA
Light emission: red LED 660 nm
Spot dimension: aprox. 50 mm at 1.5 m
Setting: sensitivity trimmer
Indicators:
yellow OUTPUT LED
green STABILITY LED
Output type:
PNP, NO and NC
NPN, NO and NC
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 500 µs
Switching frequency: 1 kHz
Operating mode: dark on NO / light on NC
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in glass (tilted anti-reflection)
Weight:
90 g max.
40 g max.
Operating temperature: -25 ... +55°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2
1
3
4
5
6
7
2
S60-PA-2-B51-NN
S60-PA-2-B51-PP
S60-PA-5-B51-NN
S60-PA-5-B51-PP
SELECTION TABLE
coaxial optics - 2 m cable
S60-PA-2-B51-NN 956201610 NPN
S60-PA-2-B51-PP 956201600 PNP
coaxial optics - M12 connector
S60-PA-5-B51-NN 956201630 NPN
S60-PA-5-B51-PP 956201620 PNP
All the ordering codes and information are
summarised in the last pages of this catalogue
Recommended operating distance
Maximum operating distance
R5 4
High efficienct reflectors can be used to
obtain larger operating distances. Refer
to Reflectors (A.01) of the General
Catalogue
7Internal lenses in glass
Detection areaExcess gain
R2
R5
R2
R5
4,2
11
COAXIAL POLARISED RETROREFLEX FOR TRANSPARENTS
The high sensitivity and reduced
hysterisis of this retroreflex sensor
allow to detect even the slightest
attenuation of the received light
emission, caused by the presence
of transparent objects, such as
glass or PET bottles or plastic film
sheets for packaging. The presence
of polarisation filters avoids false
switching on shiny surfaces and
the coaxial optics improves the
detection precision on the entire
operating range.
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Reflectors (A.01), Connectors
(A.03) and Fixing Brackets (A.04) of the
General Catalogue
DIMENSIONS
INDICATORS AND SETTINGS Output status LED
Adjustment trimmer
M12 connector output
Cable output
A
B
C
D
CONNECTIONS
Single-turn trimmer for sensitivity adjustment.
Rotate clockwise to increase the operating distance.
12
T
A
C
C
D
S60-PA-5
S60-PA-2
B
A
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
NC OUTPUT
0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
NC OUTPUT
1 Limit values
2Average life of 100.000 h with TA= +25 °C
3270° trimmer
4PVC, 4 x 0.14 mm2
SELECTION TABLE
coaxial optics - 2 m cable
S60-PA-2-T51-NN 956201530 NPN
S60-PA-2-T51-PP 956201380 PNP
coaxial optics - M12 connector
S60-PA-5-T51-NN 956201250 NPN
S60-PA-5-T51-PP 956201100 PNP
All the ordering codes and information are
summarised in the last pages of this catalogue
TECHNICAL DATA
Operating distance: 0 ... 2 m
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤40 mA
Light emission: red LED 660 nm
Spot dimension: aprox. 50 mm at 1.5 m
Setting: sensitivity trimmer
Indicators: yellow OUTPUT LED
Output type:
PNP, NO and NC
NPN, NO and NC
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 500 µs
Switching frequency: 1 kHz
Operating mode: dark on NO / light on NC
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens materiale: window in glass (tilted anti-reflection)
Weight:
90 g max.
40 g max.
Operating temperature: -25 ... +55°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2
1
3
4
5
6
7
2
S60-PA-2-T51-NN
S60-PA-2-T51-PP
S60-PA-5-T51-NN
S60-PA-5-T51-PP
0,50 1 1,5 2 (m)
R2 1,5
Recommended operating distance
Maximum operating distance
R5
1,4
TECHNICAL NOTES
DETECTION DIAGRAMS
Detection areaExcess gain
1,7 2
1,7
R2
R5
R2
R5
2 m
5Connector can be blocked on two positions
6A - reverse polarity protection
B - overload and short-circuit protection on
outputs
7Internal lenses in glass
13
DIFFUSE PROXIMITY
This diffuse proximity sensor
represents a reliable, simple and
cost-effective solution for the direct
detection of any object within the
operating distance, that can be set
using the sensitivity adjustment
trimmer.. The visible red emission
facilitates the alignment of the
sensor or of the object to detect
and in particular in short operating
distances.
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Connectors (A.03) and Fixing
Brackets (A.04) of the General Catalogue
DIMENSIONS
INDICATORS AND SETTINGS Output status LED
Adjustment trimmer
M12 connector output
Cable output
A
B
C
D
CONNECTIONS
14
C
S60-PA-5
S60-PA-2
B
A
A
C
C
D
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
NC OUTPUT
Single-turn trimmer for sensitivity adjustment.
Rotate clockwise to increase the operating distance.
0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
NC OUTPUT
100 cm
DETECTION DIAGRAMS
SELECTION TABLE
axial optics - 2 m cable
S60-PA-2-C01-NN 956201470 NPN
S60-PA-2-C01-PP 956201310 PNP
axial optics - M12 connector
S60-PA-5-C01-NN 956201190 NPN
S60-PA-5-C01-PP 956201050 PNP
TECHNICAL DATA
Operating distance: 0 ... 100 cm
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤40 mA
Light emission: red LED 660 nm
Spot dimension: approx. 50 mm at 90 cm
Setting: sensitivity trimmer
Indicators:
yellow OUTPUT LED
green STABILITY LED
Output type:
PNP, NO and NC
NPN, NO and NC
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 500 µs
Switching frequency: 1 kHz
Operating mode: light on NO / dark on NC
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in PMMA
Weight:
90 g max.
40 g max.
Operating temperature: -25 ... +55°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2
1
3
5
6
7
4
2
S60-PA-2-C01-NN
S60-PA-2-C01-PP
S60-PA-5-C01-NN
S60-PA-5-C01-PP
All the ordering codes and information are
summarised in the last pages of this catalogue
TECHNICAL NOTES
1 Limite values
2Average life of 100.000 h with TA= +25 °C
3270° trimmer
4PVC, 4 x 0.14 mm2
5Connector can be blocked on two positions
6A - reverse polarity protection
B - overload and short-circuit protection on
outputs
7Internal lenses in Polycarbonate
Detection areaExcess gain
Grey 18%
White 90%
Grey 18%
White 90%
300 60 90 120 (cm)
Grey
Recommended operating distance
Maximum operating distance
White
1,4
100 110
80
15
70
LONG DIFFUSE PROXIMITY
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Connectors (A.03) and Fixing
Brackets (A.04) of the General Catalogue
This version of diffuse proximity
sensor offers the maximum
operating distance for the direct
detection of objects, without the
use of separate reflectors or
receivers. The detection distance
can be set using the sensitivity
adjustment trimmer. The green
stability LED indicates that the
received signal is higher than the
minimum signal for stable output
switching.
DIMENSIONS
INDICATORS AND SETTINGS Output status and
stability LEDs
Adjustment trimmer
M12 connector output
Cable output
A
B
C
D
CONNECTIONS
16
C
S60-PA-5
S60-PA-2
B
A
A
C
C
D
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
NC OUTPUT
Single-turn trimmer for sensitivity adjustment.
Rotate clockwise to increase the operating distance.
0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
NC OUTPUT
200 cm
DETECTION DIAGRAMS
SELECTION TABLE
axial optics - 2 m cable
S60-PA-2-C11-NN 956201480 NPN
S60-PA-2-C11-PP 956201320 PNP
axial optics -M12 connector
S60-PA-5-C11-NN 956201200 NPN
S60-PA-5-C11-PP 956201110 PNP
TECHNICAL DATA
Operating distance: 5 ... 200 cm
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤40 mA
Light emission: infrared LED 880 nm
Spot dimension: approx. 250 mm at 1 m
Setting: sensitivity trimmer
Indicators:
yellow OUTPUT LED
green STABILITY LED
Output type:
PNP, NO and NC
NPN, NO and NC
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 500 µs
Switching frequency: 1 kHz
Operating mode: light on NO / dark on NC
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in PMMA
Weight:
90 g max.
40 g max.
Operating temperature: -25 ... +55°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2
1
3
5
6
7
4
2
S60-PA-2-C11-NN
S60-PA-2-C11-PP
S60-PA-5-C11-NN
S60-PA-5-C11-PP
All the ordering codes and information are
summarised in the last pages of this catalogue
TECHNICAL NOTES
1 Limite values
2Average life of 100.000 h with TA= +25 °C
3270° trimmer
4PVC, 4 x 0.14 mm2
5Connector can be blocked on two positions
6A - reverse polarity protection
B - overload and short-circuit protection on
outputs
7Internal lenses in Polycarbonate
Detection areaExcess gain
Grey 18%
White 90%
Grey 18% White 90%
500 100 150 200
Grey
Recommended operating distance
Maximum operating distance
White
1,4
200 220
140
250
(cm)
120
17
PROXIMITY WITH RED LASER EMSSION
The visible red laser emission
allows the accurate detection of
very small objects. The sensors
operate as a proximity device up to
60 cm and can be used as a
contrast sensor for high contrast
mark detection. The class 1 laser
emission, according to
E N 60825-1, guarantees maximum
safety for the operators in all
applications.
DIMENSIONS
INDICATORS AND SETTINGS
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Connectors (A.03) and Fixing
Brackets (A.04) of the General Catalogue
Output status and
power on LEDs
Adjustment trimmer
M12 connector output
Cable output
A
B
C
D
CONNECTIONS
Single-turn trimmer for sensitivity adjustment.
Rotate clockwise to increase the operating distance.
18
L-C
S60-PA-5
S60-PA-2
B
A
A
C
C
D
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
NC OUTPUT 0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
NC OUTPUT
60 cm
DETECTION DIAGRAMS
TECHNICAL NOTES
1 Limit values
2Average life of 50.000 h with TA= +25 °C
3270° trimmer
4PVC, 4 x 0.14 mm2
SELECTION TABLE
axial optics - 2 m cable
S60-PL-2-C01-NN 956201640 NPN
S60-PL-2-C01-PP 956201650 PNP
axial optics - M12 connector
S60-PL-5-C01-NN 956201660 NPN
S60-PL-5-C01-PP 956201670 PNP
All the ordering codes and information are
summarised in the last pages of this catalogue
TECHNICAL DATA
Operating distance: 0 ... 60 cm
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤35 mA
Light emission: red Laser 650 nm
class 1 EN 60825-1
class II CDRH21 CFR 1040.10
Resolution:
approx. 0.2 mm at 15 cm
approx. 1 mm at 35 cm
approx. 2 mm at 50 cm
Setting: sensitivity trimmer
Indicators:
yellow OUTPUT LED
green POWER ON LED
Output type:
PNP, NO and NC
NPN, NO and NC
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 250 µs
Switching frequency: 2 kHz
Operating mode: light on NO / dark on NC
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in PMMA
Weight:
90 g max.
40 g max.
Operating temperature: -10 ... +50°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2, EN 60825-1,
CDRH21 CFR 1040.10
1
3
4
6
7
5
2
S60-PL-2-C01-NN
S60-PL-2-C01-PP
S60-PL-5-C01-NN
S60-PL-5-C01-PP
ResolutionDetection area
0 20 40 60 (cm)
Operating distance
White 90%
5Connector can be blocked on two positions
6A - reverse polarity protection
B - overload and short-circuit protection on
outputs
7Internal lenses in glass and Polycarbonate
60
Grey 18%
19
BACKGROUND SUPPRESSION WITH RED EMISSION
DIMENSIONS
INDICATORS AND SETTINGS
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Connectors (A.03) and Fixing
Brackets (A.04) of the General Catalogue
Output status and
READY/ERROR LEDs
Teach-in push-button
M12 connector output
Cable output
A
B
C
D
Teach-in button for setting.
EASYtouch™ provides two setting modes: standard or fine.
Please refer to instructions manual for operating details.
CONNECTIONS
Background suppression proximity
allows to precisely adjust the
distance over which the object is
not detected, with the minimum
difference between different
coloured objects. The EASYtouchTM
setting procedure fixes
automatically the best detection
conditions with medium or high
precision, simply pressing once the
teach-in push-button, in presence
of the background to suppress.
20
M
A
C
C
D
B
A
S60-PA-5
S60-PA-2
REMOTE
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
REMOTE 0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
REMOTE
DETECTION DIAGRAMS
TECHNICAL DATA
Operating distance: 7 ... 20 cm
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤30 mA
Light emission: red LED 670 nm
Spot dimension: approx. 16 mm at 20 cm
Setting:
teach-in push-button
remote on cable
Setting procedure: EASYtouch™
Indicators: yellow OUTPUT LED
green / red READY / ERROR LED
Output type:
PNP, NO
NPN, NO
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 500 µs
Max. switching frequency: 1 kHz
Operating mode:
light with EASYtouch™
dark / light configurable
Timing function: 20 ms minimum output ON
Auxiliary functions: remote
keylock
Connection:
2 m Ø 4 mm cable
M12 4-pole connection
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in PMMA
Weight:
90 g max.
40 g max.
Operating temperature: -25 ... +55°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2
1
3
5
6
7
8
4
2
S60-PA-2-M08-NH
S60-PA-2-M08-PH
S60-PA-5-M08-NH
S60-PA-5-M08-PH
SELECTION TABLE
axial optics - 2 m cable
S60-PA-2-M08-NH 956201500 NPN
S60-PA-2-M08-PH 956201350 PNP
axial optics - M12 connector
S60-PA-5-M08-NH 956201220 NPN
S60-PA-5-M08-PH 956201080 PNP
All the ordering codes and information are
summarised in the last pages of this catalogue
20 cm
0 5 10 15 20 (cm)
Operating distance
20
Detection difference with
EASYtouch™ acquisition
mm
% difference object distance
Setting distance on white 90% background
21
TECHNICAL NOTES
1Limit values
2Average life of 100.000 h with TA= +25 °C
3Connect to 0 V when remote wire not used
4Active with remote at +Vdc at power on
5PVC, 4 x 0.14 mm2
6Connector can be blocked on two positions
7A - reverse polarity protection
B - overload and short-circuit protection
8Internal lenses in Polycarbonate
10
8
6
4
2
0
70 120 170 220
II3D
White 90% /
Black 6%
White 90% /
Grey 18%
BACKGROUND SUPPRESSION WITH RED LASER EMISSION
The background suppression with
red laser emission offers the best
precision in terms of resolution and
for background suppression, over
which the object is not detected.
The class 1 laser e m ission,
according to EN 60825-1,
guarantees maximum safety for the
operators in all applications.
DIMENSIONS
INDICATORS AND SETTINGS
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Connectors (A.03) and Fixing
Brackets (A.04) of the General Catalogue
Output status and LASER
ON/ERROR LEDs
Teach-in push-button
M12 connector output
Cable output
A
B
C
D
CONNECTIONS
22
L-M
A
C
C
D
B
A
S60-PA-5
S60-PA-2
Teach-in button for setting.
EASYtouch™ provides two setting modes: standard or fine.
Please refer to instructions manual for operating details.
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
REMOTE 0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
REMOTE
10 cm
DETECTION DIAGRAMS
SELECTION TABLE
axial optics - 2 m cable
S60-PL-2-M08-NH 956201580 NPN
S60-PL-2-M08-PH 956201440 PNP
axial optics - M12 connector
S60-PL-5-M08-NH 956201280 NPN
S60-PL-5-M08-PH 956201160 PNP
All the ordering codes and information are
summarised in the last pages of this catalogue
TECHNICAL DATA
Operating distance: 5 ... 10 cm
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤60 mA
Light emissione: red Laser 650 nm
class 1 EN 60825-1
class II CDRH21 CFR 1040.10
Resolution: approx. 0.5 mm at 6 cm
Setting:
teach-in push-button
remote on cable
Setting procedure: EASYtouch™
Indicators:
yellow OUTPUT LED
green / red LASER ON / ERROR LED
Output type:
PNP, NO
NPN, NO
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 500 µs
Switching frequency: 1 kHz
Operating mode:
light with EASYtouch™
dark / light configurable
Timing function: 20 ms minimum output ON
Auxiliary functions:
remote
keylock
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in PMMA
Weight:
90 g max.
40 g max.
Operating temperature: -10 ... +50°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2,
EN 60825-1, CDRH21 CFR 1040.10
1
3
6
7
8
5
4
2
S60-PL-2-M08-NN
S60-PL-2-M08-PP
S60-PL-5-M08-NN
S60-PL-5-M08-PP
TECHNICAL NOTES
1Limit values
2Average life of 50.000 h with TA= +25 °C
3Connect to 0 V when remote wire not used
4Active with remote at +Vdc at power on
5PVC, 4 x 0.14 mm2
6Connector can be blocked on two positions
7A - reverse polarity protection
B - overload and short-circuit protection
8Internal lenses in glass and Polycarbonate
0 2 4 6 8
Operating distance
10
10 (cm)
Detection difference with
EASYtouch™ acquisition
Setting distance on white 90% background
% difference object distance
23
II3D
White 90% /
Black 6%
White 90% /
Grey 18%
FORE-BACKGROUND SUPPRESSION WITH RED EMISSION
The forground and background
suppression proximity allows to
precisely adjust the minimum and
maximum detection distance.
The EASYtouchTM setting procedure
fixes automatically the best
detection conditions with medium
or high precision, simply pressing
once the teach-in push-button.
DIMENSIONS
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Connectors (A.03) and Fixing
Brackets (A.04) of the General Catalogue
INDICATORS AND SETTINGS
Teach-in button for setting.
EASYtouch™ provides two setting modes: standard or fine.
Please refer to instructions manual for operating details.
CONNECTIONS
24
Output status and
READY/ERROR LEDs
Teach-in push-button
M12 connector output
Cable output
A
B
C
D
N
A
C
C
D
B
A
S60-PA-5
S60-PA-2
REMOTE
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
REMOTE
DETECTION DIAGRAMS
SELECTION TABLE
axial optics - 2 m cable
S60-PA-2-N03-NH 956201520 NPN
S60-PA-2-N03-PH 956201370 PNP
axial optics - M12 connector
S60-PA-5-N03-NH 956201240 NPN
S60-PA-5-N03-PH 956201090 PNP
All the ordering codes and information are
summarised in the last pages of this catalogue
TECHNICAL DATA
Operating distance: 7 ... 20 cm
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤50 mA
Light emission: red LED 670 nm
Spot dimension: approx. 16 mm at 20 cm
Setting:
teach-in push-button
remote on cable
Setting procedure: EASYtouch™
Indicators: yellow OUTPUT LED
green / red READY / ERROR LED
Output type:
PNP, NO
NPN, NO
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 500 µs
Max. switching frequency: 1 kHz
Operating mode:
light with EASYtouch™
dark / light configurable
Auxiliary functions: remote
keylock
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in PMMA
Weight:
90 g max.
40 g max.
Operating temperature: -25 ... +55 C
Storage temperature: -25 ... +70 C
Reference standard: EN 60947-5-2
1
3
5
6
7
8
4
2
S60-PA-2-N03-NH
S60-PA-2-N03-PH
S60-PA-5-N03-NH
S60-PA-5-N03-PH
20 cm
0 5 10 15 20 (cm)
Operating distance
20
Note: in the acquisition mode, the fore-background
suppression points are programmable
Detection difference
mm
mm
25
Background suppression area
Detection area
Foreground suppression area
Distance
Distance
TECHNICAL NOTES
1Limit values
2Average life of 100.000 h with TA= +25 °C
3Connect to 0 V when remote wire not used
4Active with remote at +Vdc at power on
5PVC, 4 x 0.14 mm2
6Connector can be blocked on two positions
7A - reverse polarity protection
B - overload and short-circuit protection
8Internal lenses in Polycarbonate
DIMENSIONS
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Connectors (A.03) and Fixing
Brackets (A.04) of the General Catalogue
Output status and
READY/ERROR LEDs
Teach-in push-button
M12 connector output
orientable in two positions
Cable output
A
B
C
D
Teach-in button for setting.
EASYtouch™ provides two setting modes: standard or fine.
Please refer to instructions manual for operating details.
B
A
CONNECTIONS
A
AC
C
The white light LED emission is
designed for the detection of a
large number of coloured or grey-
scale contrasts, in order to detect
print registration marks or similar.
The patent-covered EASYtouchTM
setting procedures automatically
selects the best detection
conditions, simply by pressing the
teach-in push-button once. A
higher level of accuracy can be
obtained or the dark/light operating
mode can be inverted.
CONTRAST SENSOR WITH WHITE EMISSION
W
S60-PA-5
S60-PA-2
INDICATORS AND SETTINGS
D
26
REMOTE
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
REMOTE 0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
REMOTE
TECHNICAL DATA
DETECTION DIAGRAMS
SELECTION TABLE
Operating distance: 19 mm
Max. field of depth: –2 mm
Power supply: 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤30 mA
Light emission: white LED 400 - 700 nm
Spot dimension: aprox. 3.5 mm at 19 mm
Resolution: 0.5 mm
Setting:
teach-in push-button
remote on cable
Setting procedure: EASYtouch™
Indicators:
yellow OUTPUT LED
green / red READY / ERROR LED
Output type:
PNP, NO
NPN, NO
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 100 µs
Max. switching frequency: 5 kHz
Operating mode:
dark with EASYtouch™
automatic dark / light with fine acquisition
Timing function: 20 ms minimum output ON
Auxiliary functions:
remote
keylock
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens materiale: window in glass (tilted anti-reflection)
Weight:
90 g max.
40 g max.
Operating temperature: -25 ... +55°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2
S60-PA-2-W08-NH
S60-PA-2-W08-PH
S60-PA-5-W08-NH
S60-PA-5-W08-PH
contrast sensor - 2 m cable
S60-PA-2-W08-NH 956201550 NPN
S60-PA-2-W08-PH 956201400 PNP
contrast sensor - M12 connector
S60-PA-5-W08-NH 95621030 NPN
S60-PA-5-W08-PH 95621020 PNP
TECHNICAL NOTES
1Limit values
2Average life of 100.000 h with TA= +25 °C
3Connect to 0 V when remote wire not used
4Active with remote at +Vdc at power on
5PVC, 4 x 0.14 mm2
6Connector can be blocked on two positions
7A - reverse polarity protection
B - overload and short-circuit protection
8Internal lenses in glass
1
2
3
4
5
6
7
8
Contrast sensor
Relative received signal
Distance
19 mm
27
All the ordering codes and information are
summarised in the last pages of this catalogue
DIMENSIONS
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Connectors (A.03) and Fixing
Brackets (A.04) of the General Catalogue
Output status and
READY/ERROR LEDs
Teach-in push-button
M12 connector output
orientable in two positions
Cable output
A
B
C
D
Teach-in button for setting.
EASYtouch™ provides two setting modes: standard or fine.
Please refer to instructions manual for operating details.
B
A
CONNECTIONS
A
A
D
C
C
The UV light LED emission detects
any luminescent reference, even on
very reflective surfaces, such as
ceramics, metal or mirrored glass.
The patent-covered EASYtouchTM
setting procedures fixes
automatically the best detection
conditions, simply by pressing the
teach-in push-button once, with the
reference to detect. The threshold
between two different luminescence
degrees can be set by a second
pressure of the button
LUMINESCENCE SENSOR WITH UV EMISSION
28
U
S60-PA-5
S60-PA-2
INDICATORS AND SETTINGS
REMOTE
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
REMOTE
0V -
(BLUE)
(WHITE)
+ 10 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
REMOTE
TECHNICAL DATA
DETECTION DIAGRAMS
SELECTION TABLE
Operating distance: 0 ... 40 mm
Power supply : 10 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤30 mA
Light emission: LED UV 370 nm
Spot dimension: approx. 1.5 mm at 10 mm (max. signal)
Resolution: 0.5 mm
Setting:
teach-in push-button
remote on cable
Setting procedure: EASYtouch™
Indicators:
yellow OUTPUT LED
green / red READY / ERROR LED
Output type:
PNP, NO
NPN, NO
Output current: ≤100 mA
Saturation voltage: ≤2 V
Response time: 250 µs
Max. switching frequency: 2 kHz
Operating mode:
light with EASYtouch™
automatic dark / light with fine acquisition
Timing function: 20 ms minimum output ON
Auxiliary functions:
remote
keylock
Connection:
2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in glass (tilted anti-reflection)
Weight:
90 g max.
40 g max.
Operating temperature: -25 ... +55 C
Storage temperature: -25 ... +70 C
Reference standard: EN 60947-5-2
S60-PA-2-U08-NH
S60-PA-2-U08-PH
S60-PA-5-U08-NH
S60-PA-5-U08-PH
luminescence sensor - 2 m cable
S60-PA-2-U08-NH 956201540 NPN
S60-PA-2-U08-PH 956201390 PNP
luminescence sensor - M12 connector
S60-PA-5-U08-NH 956201010 NPN
S60-PA-5-U08-PH 956201000 PNP
TECHNICAL NOTES
1Limit values
2Average life of 100.000 h with TA= +25 °C
3Connect to 0 V when remote wire not used
4Active with remote at +Vdc at power on
5PVC, 4 x 0.14 mm2
6Connector can be blocked on two positions
7A - reverse polarity protection
B - overload and short-circuit protection
8Internal lenses in glass
1
2
3
4
5
6
7
8
Luminescence sensor
Relative received signal
Distance
40 mm
All the ordering codes and information are
summarised in the last pages of this catalogue
29
ACCESSORIES
For dedicated accessories refer to the
ACCESSORIES section of this catalogue.
Refer also to Connectors (A.03) and Fixing
Brackets (A.04) of the General Catalogue
This sensor gives an
analogue 0-10 Vdc output
proportional to the target
distance in the measurement
range, with the possibility of
setting a threshold for the other
switching output. The yellow
LED indicates the activation of
the output during switching
while the red LED turns on
when the object is outside the
measurement range.
DISTANCE SENSOR WITH RED EMISSION
30
Y
S60-PA-5
S60-PA-2
INDICATORS AND SETTINGS
Teach-in button for setting.
EASYtouch™ provides two setting modes: standard or fine.
Please refer to instructions manual for operating details.
Output status and range
LEDs
Teach-in push-button
M12 connector output
Cable output
A
B
C
D
A
C
C
D
B
A
DIMENSIONS
CONNECTIONS
BROWN
WHITE
BLACK
BLUE
NO OUTPUT
Vdc
ANALOGUE OUTPUT
0V -
(BLUE)
(WHITE)
+ 18 ... 30 Vdc
(BROWN)
(BLACK)
NO OUTPUT
ANALOGUE OUTPUT
TECHNICAL DATA
DETECTION DIAGRAMS
SELECTION TABLE
Operating distance: 50 ... 150 mm
Power supply: 18 ... 30 Vdc
Ripple: ≤2 Vpp
Consumption: ≤60 mA
Light emission: red LED 670 nm
Spot dimensions: approx. 16 mm at 150 mm
Setting: teach-in push-button
Setting procedure: EASYtouch™
Indicators: yellow OUTPUT LED
red FIELD LED
Output type: PNP, NO
NPN, NO
analogue with 0 ... 10 V (8 bit)
Minimum resistance load: 1 KΩ
Output current: ≤100 mA
Saturage voltage: ≤2 V
Response time: 1 ms
Switching frequency: 500 Hz
Resolution: 1 mm (linearity ± 2.5 %)
Operating mode: light with EASYtouch™
automatic dark / light fine acquisition
configurable direct/inverse proportionality
Switching output hysterisis: 10 % max.
Connection: 2 m Ø 4 mm cable
M12 4-pole connector
Electrical protection: class 2
Mechanical protection: IP67
Protection devices: A, B
Housing material: ABS
Lens material: window in PMMA
Weight: 90 g max.
40 g max.
Operating temperature: -25 ... +55°C
Storage temperature: -25 ... +70°C
Reference standard: EN 60947-5-2
S60-PA-2-Y03-NV
S60-PA-2-Y03-PV
S60-PA-5-Y03-NV
S60-PA-5-Y03-PV
distance sensor - 2 m cable
S60-PA-2-Y03-NV 956201680 NPN
S60-PA-2-Y03-PV 956201690 PNP
distance sensor - M12 connector
S60-PA-5-Y03-NV 956201700 NPN
S60-PA-5-Y03-PV 956201710 PNP
TECHNICAL NOTES
1Measurement field can be reduced at device
setting
2Limit values
3Average life of 100.000 h with TA= +25 °C
4PVC, 4 x 0.14 mm2
5Connector can be blocked on two positions
6A - reverse polarity protection
B - overload and short-circuit protection
7Internal lenses in Polycarbonate
1
2
3
4
5
6
7
150 mm
All the ordering codes and information are
summarised in the last pages of this catalogue
0 50 100 150 200 (mm)
Operating distance
150
Analogue output on max. measurement range
in inverse proportionality
Voltage (V)
Distance
mm
31
II3D
32
TECHNOLOGY ADVANTAGES
The S60 series establishes the new market standard in the compact 50 x 50 mm fotoelectric sensors, offering a
complete family of optic functions with only 15 mm housing width.
The standard dimensions, reduced housing width and the multi-hole fixing system make the S60 series compatible
with the majority of compact sensors present on the market.
All the models are available in cable or M12 connector versions, with NPN or PNP type static output, conforming to
the EN 60947-5-2 European standard.
The M12 connector can be easily rotated to 90° and can be blocked in the straight or right-angle positions respect to
the optic axis, the cable emerges at 45° and thanks to its flexibility can rotate pratically 360°. Thanks to these
characteristics the sensor can be easily fixed on all sides and at all angles.
All the basic optic functions such as the through beam, polarised retroreflex, diffuse proximity and background
suppression are available also in the version with visible red laser emission, with all the safety charateristics for the
user in class 1 conforming to the EN 60825-1 European standard and in class II according to CDRH21 CFR Part 1040
USA standard.
Besides the evident advantages for the alignment of sensors and of the object to detect, thanks to the high spot
visibility and concentration, the laser emissions offer an improved detection resolution, millimetric for the through
beam and polarised retroreflex versions, or decimillimetric for the diffuse proximity and background suppression.
The polarised retroreflex model is available also in the coaxial optic version that, with the emitter optic axis coinciding
with the receiver one, offers a better detection axis precision and the elimination of the blind zone near to the sensor.
(mm)
COMPACT PHOTOELECTRIC SENSORS
STANDARD 50 x 50 x 15 mm
TECHNOLOGY ADVANTAGES
33
The coaxial optics is present also in the polarised retroreflex model for the detection of transparent objects, notably
increasing the performances of this optic function and its immunity to object movements inside the detection area.
The contrast sensor with white LED emission has an operating distance ranging from 17 to 21 mm and detects
coloured or grey-scale marks, with a minimum dimension of 0.5 mm and an operating frequency reaching 5 kHz.
The luminescence sensor with UV LED emission has an operating distance ranging from 0 to 40 mm and detects
fluorescent or luminescent targets, with a minimum dimension of 0.5 mm and an operating frequency reaching 2 kHz.
The setting of these sensors is extremely rapid and easy, thanks to the patent-covered EASYtouch™system that
alllows to automatically fix the object detection threshold, with a single pressure of the teach-in push-button.
It is possibile to set the sensor to detect more critical differences between the mark and the background, or invert the
dark or light operating mode, by pressing twice the push-button.
The EASYtouch™system allows to select the ‘Remote’ function for the remote sensor setting through the cable or
connector, the ‘Keylock’ function to block the keyboard, ‘Delay OFF’ function for the 20 ms timing of the output
deactivation.
The sensor technology with background and/or foreground suppression of the S60 series has allowed to develop also
a cost-effective distance sensor with a double output: a 0 - 10 V analogue output and a digital NPN or PNP switching
output.
The measurement range and the switching threshold output can be selected in the 50 - 150 mm range, with a ± 1
mm precision; the direct or inverse proportionality and the light or dark operating mode can be selected.
Complete external shield for high
electromagnetic compatibility
COAXIAL OPTICS
BIAXIAL OPTICS
SMT chip-size for the electronic
miniaturisation and more space for the optics
DIMENSIONS ACCESSORIES
34
ST-5018
ST-5020
JOINT-60
ST-5019
ST-5021
ST-504
MODEL CODING TABLE
S60-PA-2-B01-NN
HOUSING
P = plastic flat
OPTICS
A = normal
L = laser
CONNECTION
2 = cable
5 = M12 connection
OPTIC FUNCTION
refer to INDEX
ALPHABETICAL
MODEL INDEX SETTING
0 = fixed
1 = trimmer
3 = tteach-in push-button
8 = teach-in push-button with
delay-OFF function
INPUTS / OUTPUTS
NH = NPN NO output with
REMOTE SET input
PH = PNP NO with
REMOTE SET input
NN = NPN NO-NC output
PP = PNP NO-NC output
NV = NPN NO output with
0-10 V output
PV = PNP NO output with
0-10 V output
XG = no output -
test input
ACCESSORIES
35
ACCESSORIES
MODEL DESCRIPTION ORDER N°
ST-5018 protection bracket 95ACC5310
ST-5019 protection bracket 95ACC5320
ST-5020 fixing bracket 95ACC5330
ST-5021 fixing bracket 95ACC5340
JOINT-60 protection bracket with jointed support 95ACC5350
ST-504 S6/S60 fixing bracket 95ACC1320
SELECTION TABLE AND ORDER INFORMATION
The series is compatible with the following Datasensor accessories (refer General Catalogue)
-CS connectors
- R reflectors
New accessories dedicated to the S60 series have been developed to cover all the fixing requirements and improve
functioning.
Note: Not all code combinations are available. Please refer to
alphabetical model index for the list of available models.
ALPHABETICAL MODEL INDEX
HEADQUARTERS
DATASENSOR SpA
via Lavino, 265 - 40050 Monte San Pietro, BO - Italy
Tel. +39 051/6765611 • Fax +39 051/6759324
www.datasensor.com • e-mail info@datasensor.com
UNIVERSAL COMPACT SENSORS
Datasensor SpA endeavours to continuously improve and renew its products; for this reason the
technical data and contents of this catalogue may undergo variations without prior notice. For correct
installation and use Datasensor SpA can guarantee only the data indicated in the instruction manual
supplied with the products.
Printed in Italy in January 2005
Rev. 01
UNI EN ISO9001
UNI EN ISO14000
Distributed by:
MODEL FUNCTION CONNECTION OUTPUT N ORDER PAGE
S60-PA-2-B01-NN polarised retroreflex cable NPN 956201460 6
S60-PA-2-B01-PP polarised retroreflex cable PNP 956201300 6
S60-PA-2-B51-NN coaxial polarised retroreflex cable NPN 956201610 8
S60-PA-2-B51-PP coaxial polarised retroreflex cable PNP 956201600 8
S60-PA-2-C01-NN diffuse proximity cable NPN 956201470 14
S60-PA-2-C01-PP diffuse proximity cable PNP 956201310 14
S60-PA-2-C11-NN long diffuse proximity cable NPN 956201480 16
S60-PA-2-C11-PP long diffuse proximity cable PNP 956201320 16
S60-PA-2-F01-NN recevier cable NPN 956201490 2
S60-PA-2-F01-PP recevier cable PNP 956201330 2
S60-PA-2-G00-XG emitter cable - 956201340 2
S60-PA-2-M08-NH background suppression cable NPN 956201500 20
S60-PA-2-M08-PH background suppression cable PNP 956201350 20
S60-PA-2-N03-NH fore-background suppression cable NPN 956201520 24
S60-PA-2-N03-PH fore-background suppression cable PNP 956201370 24
S60-PA-2-T51-NN retroreflex for transparents cable NPN 956201530 12
S60-PA-2-T51-PP retroreflex for transparents cable PNP 956201380 12
S60-PA-2-U08-NH luminescence sensor cable NPN 956201540 28
S60-PA-2-U08-PH luminescence sensor cable PNP 956201390 28
S60-PA-2-W08-NH contrast sensor cable NPN 956201550 26
S60-PA-2-W08-PH contrast sensor cable PNP 956201400 26
S60-PA-2-Y03-NV distance sensor cable NPN 956201680 30
S60-PA-2-Y03-PV distance sensor cable PNP 956201690 30
S60-PA-5-B01-NN polarised retroreflex M12 connector NPN 956201180 6
S60-PA-5-B01-PP polarised retroreflex M12 connector PNP 956201040 6
S60-PA-5-B51-NN coaxial polarised retroreflex M12 connector NPN 956201630 8
S60-PA-5-B51-PP coaxial polarised retroreflex M12 connector PNP 956201620 8
S60-PA-5-C01-NN diffuse proximity M12 connector NPN 956201190 14
S60-PA-5-C01-PP diffuse proximity M12 connector PNP 956201050 14
S60-PA-5-C11-NN long diffuse proximity M12 connector NPN 956201200 16
S60-PA-5-C11-PP long diffuse proximity M12 connector PNP 956201110 16
S60-PA-5-F01-NN recevier M12 connector NPN 956201210 2
S50-PA-5-F01-PP recevier M12 connector PNP 956201060 2
S60-PA-5-G00-XG emitter M12 connector - 956201070 2
S60-PA-5-M08-NH background suppression M12 connector NPN 956201220 20
S60-PA-5-M08-PH background suppression M12 connector PNP 956201080 20
S60-PA-5-N03-NH fore-background suppression M12 connector NPN 956201240 24
S60-PA-5-N03-PH fore-background suppression M12 connector PNP 956201090 24
S60-PA-5-T51-NN retroreflex for transparents M12 connector NPN 956201250 12
S60-PA-5-T51-PP retroreflex for transparents M12 connector PNP 956201100 12
S60-PA-5-U08-NH luminescence sensor M12 connector NPN 956201010 28
S60-PA-5-U08-PH luminescence sensor M12 connector PNP 956201000 28
S60-PA-5-W08-NH contrast sensor M12 connector NPN 956201030 26
S60-PA-5-W08-PH contrast sensor M12 connector PNP 956201020 26
S60-PA-5-Y03-NV distance sensor M12 connector NPN 956201700 30
S60-PA-5-Y03-PV distance sensor M12 connector PNP 956201710 30
S60-PL-2-B01-NN laser polarised retroreflex cable NPN 956201560 10
S60-PL-2-B01-PP laser polarised retroreflex cable PNP 956201410 10
S60-PL-2-C01-NN laser diffuse proximity cable NPN 956201640 18
S60-PL-2-C01-PP laser diffuse proximity cable PNP 956201650 18
S60-PL-2-F01-NN laser receiver cable NPN 956201570 4
S60-PL-2-F01-PP laser receiver cable PNP 956201420 4
S60-PL-2-G00-XG laser emitter cable - 956201430 4
S60-PL-2-M08-NH laser background suppression cable NPN 956201580 22
S60-PL-2-M08-PH laser background suppression cable PNP 956201440 22
S60-PL-5-B01-NN laser polarised retroreflex M12 connector NPN 956201260 10
S60-PL-5-B01-PP laser polarised retroreflex M12 connector PNP 956201120 10
S60-PL-5-C01-NN laser diffuse proximity M12 connector NPN 956201660 18
S60-PL-5-C01-PP laser diffuse proximity M12 connector PNP 956201670 18
S60-PL-5-F01-NN laser receiver M12 connector NPN 956201270 4
S50-PL-5-F01-PP laser receiver M12 connector PNP 956201140 4
S60-PL-5-G00-XG laser emitter M12 connector - 956201150 4
S60-PL-5-M08-NH laser background suppression M12 connector NPN 956201280 22
S60-PL-5-M08-PH laser background suppression M12 connector PNP 956201160 22
