ANALOGSINGLE-THROW PIN ATTENUATORS SINGLE-POLE SWITCHES FEATURES * * * * Attenuation range of up to 60 dB Up to octave bandwidths Voltage control Standard field replaceable RF connectors Frequency Range (GHz) Insertion Loss (dB, Max.) Model Number VSWR* In/Out (Max.) Amplitude Response** (dB) Atten. Range Options (dB, Min.) Control Options*** (VDC) Outline STANDARD, NARROWBAND VOLTAGE-CONTROLLED MODELS 0.95-1.75 1.275-1.48 1.5-1.8 2.1-2.7 2-2.2 MPAT-00950175MPAT-01270148MPAT-01500180MPAT-02100270MPAT-02000220- 1.2 2.5 1.1 1.5 1.7 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 See notes See notes See notes See notes 0.3 in band 10-60 0-30 10-60 10-60 0-37 0-20 0-20 0-20 0-20 0-6 174335 174337 174336 174336 174336 3.1-3.5 3.4-4.2 3.8-4.1 4.5-4.8 5.845-6.43 6.4-7.2 7.25-7.75 7.5-8.5 7.9-8.4 MPAT-03100350MPAT-03400420MPAT-03800410MPAT-04500480MPAT-05840643MPAT-06400720MPAT-07250775MPAT-07500850MPAT-07900840- 2.2 2.2 1.3 2.2 2.2 2.2 2.2 1.8 2.2 1.3:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 0.25 in band See notes 1 max. at 20-80 dB atten. See notes See notes See notes See notes 0.25 in band See notes 0-15 10-60 10-60 10-60 10-60 10-60 10-60 0-10 10-60 0-5 0-20 0-5 0-20 0-20 0-20 0-20 0-10 0-20 Contact MITEQ 174336 174336 174336 174336 174336 174336 174338 174336 10.7-12.5 10.95-12.75 11.7-12.75 MPAT-10701250MPAT-10951275MPAT-11701275- 2.2 2.2 2.2 1.5:1 1.5:1 1.5:1 See notes See notes See notes 10-60 10-60 10-60 0-20 0-20 0-20 174337 174337 174337 12.75-13.25 13.75-14.5 14-14.8 17.3-18.1 17.7-20.2 MPAT-12751325MPAT-13751450MPAT-14001480MPAT-17301810MPAT-17702020- 2.5 2.5 2.7 3 3 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 See notes See notes See notes See notes See notes 10-60 10-60 10-60 10-60 10-60 0-20 0-20 0-20 0-20 0-20 174337 174337 174337 174338 174338 * VSWR performance is specified over full attenuation range. ** Amplitude response: 0.2 dB over any 40 MHz window, 1 dB over full band from 0-30 dB attenuation. *** Insertion loss occurs at 0 V control. Data presented in this table refers to room temperature. Custom models featuring broader bandwidths, and/or optimized specifications are also available. Consult MITEQ for options. 100 Davids Drive, Hauppauge, NY 11788 * TEL: (631) 436-7400 * FAX: (631) 436-7430 * www.miteq.com ANALOG PIN ATTENUATORSSWITCHES (CONT.) SINGLE-POLE SINGLE-THROW Frequency Range (GHz) Insertion Loss (dB, Max.) Model Number VSWR* In/Out (Max.) Amplitude Response** (dB) Atten. Range Options (dB, Min.) Control Options*** (VDC) Outline 10-60 10-20 174336 10-60 10-20 174337 STANDARD, WIDEBAND VOLTAGE-CONTROLLED MODELS 4-8 MPAT-04000800 2.2 1.7:1 8-12 MPAT-08001200- 2.2 1.7:1 0.3 at 10 dB 1.5 at 40 dB 1.6 at 60 dB 0.5 at 10 dB 1.5 at 40 dB 1.6 at 60 dB * VSWR is guaranteed over full attenuation range. ** Amplitude response: 0.2 dB over any 40 MHz window, 1 dB over full band from 0-30 dB attenuation. *** Insertion loss occurs at 0 V control. Data presented in this table refers to room temperature. Custom models featuring broader bandwidths, and/or optimized specifications are also available. Consult MITEQ for options. ENVIRONMENTAL CONDITIONS Operating temperature .. 0 to 70C Storage temperature ...... -40 to +85C Humidity ........................ 95%, noncondensing Vibration ........................ 12 g's rms, 20-2000 Hz Per MIL-STD-810B Method 514, Procedure 5 ORDERING INFORMATION To order a standard analog attenuator with specific parameters, please include the following: MPAT-10701250- 40 15 Model Number Specify from tables on previous page. Maximum Attenuation Range (dB) Control Voltage* * Control voltage is specified at the maximum attenuation of the device. In the example above, maximum attenuation of 40 dB is achieved at 15 V. ORDERING INFORMATION FOR RF CONNECTORS Unless otherwise specified, all units will be shipped with field replaceable SMA female connectors on the input and outputs. If male connectors are desired on any port, please specify on the purchase order. 100 Davids Drive, Hauppauge, NY 11788 * TEL: (631) 436-7400 * FAX: (631) 436-7430 * www.miteq.com ANALOG PIN ATTENUATORS OUTLINE DRAWINGS 174335 0.10 [2.54] 174336 0.10 [2.54] 0.10 [2.54] 0.10 [2.54] 0.18 [4.57] 0.18 [4.57] 0.45 [11.43] GND PIN CONTROL SIGNAL 0.03 [0.76] DIA. PIN TYP. 0.130 [3.30] DIA. THRU TYP. (2) HOLES GND PIN 0.38 [9.65] TYP. 0.36 [9.14] MAX. 2.00 [50.8] 0.104 [2.64] DIA. THRU TYP. (2) HOLES 0.03 [0.76] DIA. PIN TYP. 0.55 [13.97] 0.38 [9.65] TYP. CONTROL SIGNAL 0.36 [9.14] MAX. 1.48 [37.59] 1.00 [25.4] 1.40 [35.56] 1.67 [42.42] 1.20 [30.48] 0.40 [10.16] "SMA" FEMALE 0.12 CONNECTOR, [3.05] TYP. (2) PLACES 0.13 0.43 [3.30] [10.92] TYP. 2.350 [59.69] 2.60 [66.04] 0.50 [12.7] 1.10 [27.94] "SMA" FEMALE CONNECTOR, TYP. (2) PLACES 0.13 [3.30] TYP. 1.200 [30.48] 0.30 [7.62] 1.80 [45.72] 174337 0.50 [12.7] 174338 0.10 [2.54] "SMA" FEMALE CONNECTOR, TYP. (2) PLACES 0.18 [4.57] GND PIN 0.08 [2.03] 0.104 [2.64] DIA. THRU TYP. (2) HOLES 0.03 [0.76] DIA. PIN TYP. 0.42 [10.67] CONTROL SIGNAL 0.38 [9.65] TYP. 0.80 [20.32] 0.38 [9.65] TYP. J2 J1 0.600 [15.25] E 0.36 [9.14] MAX. 0.36 [9.14] MAX. 0.40 [10.16] 0.10 [2.54] TYP. 0.104 [2.64] DIA. THRU, 4 HOLES TYP. 0.800 [20.32] 0.650 1.25 [16.51] [31.75] 1.00 [25.40] 0.11 [2.79] TYP. 0.30 [7.62] "SMA" FEMALE 0.10 CONNECTOR, [2.54] TYP. (2) PLACES GND. PIN 0.75 0.50 [19.05] [12.7] 0.40 [10.16] 0.11 [2.79] TYP. 1.050 [26.67] 1.25 [31.75] 0.13 [3.30] TYP. 0.18 [4.57] 0.50 [12.7] GENERAL NOTES: 1. Dimensions shown in brackets [ ] are in millimeters. 2. Unless specified, all connectors are type SMA female field replaceable. 3. Tolerance as follows: .xx = 0.01 [.xx = 0.25] .xxx = 0.005 [.xxx = 0.13] 100 Davids Drive, Hauppauge, NY 11788 * TEL: (631) 436-7400 * FAX: (631) 436-7430 * www.miteq.com