Product Specification RoHS-6 Compliant LaserwireTM XFP Adapter FTLX0011D4BNL PRODUCT FEATURES * Hot-pluggable XFP footprint * Supports LaserwireTM data rates of 9.95 Gb/s to 10.3 Gb/s * RoHS-6 compliant (lead-free) * Extended temperature range -5C to 85C * Single 3.3V power supply * Customizable EEPROM APPLICATIONS * Adapts LaserwireTM plug for XFP ports Finisar's FTLX0011D4BNL 10Gb/s LaserwireTM XFP Adapters are designed for use in conjunction with Finisar's Laserwire cables (Part Numbers: FCBP110LD1Lxx and FCBC110LD1Lxx). The FTLX0011D4BNL XFP Adapter allows a Laserwire cable to be plugged into an XFP port. The XFP Adapter incorporates a customizable EEPROM. The Adapter is RoHS compliant and lead free per Directive 2002/95/EC1, and Finisar Application Note AN-20382. PRODUCT SELECTION FTLX0011D4BNL (c) Finisar Corporation - July 2010 Rev. B1 Page 1 FTLX0011D4BNL Laserwire XFP Adapter Product Specification - July 2010 I. Background Figure 1 illustrates the application of the FTLX0011D4BNL XFP Adapter. Pin descriptions for the FTLX0011D4BNL interface to the host board are shown in Section II. Please refer to the FCBP110LD1Lxx Laserwire datasheet for details of the interface between the FTLX0011D4BNL XFP Adapter and the Laserwire cable. The Laserwire connector pin-out is also shown in Section II for reference. LaserwireTM FCBP110LD1Lxx XFP Adapter FTLX0011D4BNL XFP port/cage on host board Figure 1. (Top View) From left to right: Laserwire, XFP Adapter, XFP cage on host board. Insertion sequence: (1) XFP Adapter is plugged into XFP port; (2) Laserwire is plugged into Adapter. Extraction sequence: (1) Depress tab on top of Laserwire plug and extract cable from Adapter; (2) Pull on Adapter bail release lever and extract Adapter from host port. (c) Finisar Corporation - July 2010 Rev. B1 Page 2 FTLX0011D4BNL Laserwire XFP Adapter Product Specification - July 2010 II. Pin 1 2 Logic 3 LVTTL-I 4 5 6 7 8 9 10 11 Symbol GND VEE5 VCC5 GND VCC3 VCC3 SCL Name/Description (per INF-8077i) Module Ground Optional -5.2 Power Supply - Not required Module De-select; When held low allows the module to respond to 2-wire serial interface commands Interrupt (bar); Indicates presence of an important condition which can be read over the serial 2-wire interface, NOT IMPLEMENTED Transmitter Disable; Transmitter laser source turned off , NOT IMPLEMENTED. +5 Power Supply - Not used. Module Ground +3.3V Power Supply +3.3V Power Supply Serial 2-wire interface clock SDA Serial 2-wire interface data line ModDesel Interrupt LVTTL-I LVTTL-I LVTTLI/O Pin Descriptions TX_DIS 12 LVTTL-O Mod_Abs Module Absent; Indicates adapter not present. 13 LVTTL-O Mod_NR Module Not Ready 14 LVTTL-O RX_LOS Receiver Loss of Signal indicator Module Ground Module Ground Receiver inverted data output Receiver non-inverted data output Module Ground +1.8V Power Supply - Not used Power Down; When high, places the module in the low power stand-by mode and on the falling edge of P_Down initiates a module reset, NOT IMPLEMENTED Reset; The falling edge initiates a complete reset of the module including the 2-wire serial interface, equivalent to a power cycle. NOT IMPLEMENTED +1.8V Power Supply - Not used Module Ground Reference Clock non-inverted input, AC coupled on the host board - Not required Reference Clock inverted input, AC coupled on the host board - Not required Module Ground Module Ground Transmitter inverted data input Transmitter non-inverted data input Module Ground 15 16 17 18 19 20 CML-O CML-O GND GND RDRD+ GND VCC2 21 LVTTL-I P_Down/ RST 22 23 VCC2 GND Laserwire-Adapter Interface Connected to Laserwire VEE NC Adapter-XFP Port Interface Grounded in adapter NC Note 1 NC Pulled high in adapter 2 NC NC NC Pulled high in adapter NC Connected to Laserwire VEE Connected to Laserwire VCC pin 5 Connected to Laserwire VCC pin 5 NC NC Grounded in adapter Pass through Pass through Connected to adapter EEPROM NC Connected to adapter EEPROM 3 NC Pulled low in adapter 4 NC Connected to Laserwire Fault output pin 6 Connected to Laserwire VEE Connected to Laserwire VEE Laserwire RX- pin 11 Laserwire RX+ pin 10 Connected to Laserwire VEE Not used Loss of lock in Tx/Rx 2 Pass through 3 Grounded in adapter Grounded in adapter Retimed output Retimed output Grounded in adapter NC 1 1 5 5 1 NC Pulled high in adapter Not used Connected to Laserwire VEE NC Grounded in adapter 1 NC Internally terminated 6 NC 2 1 3 24 PECL-I RefCLK+ 25 PECL-I RefCLK- Internally terminated 6 26 27 28 29 30 GND Connected to Laserwire VEE Grounded in adapter GND Connected to Laserwire VEE Grounded in adapter CML-I TDLaserwire TX- pin 2 Retimed input CML-I TD+ Laserwire TX+ pin 3 Retimed input GND Connected to Laserwire VEE Grounded in adapter Notes: 1. Adapter circuit ground is isolated from adapter chassis ground within the adapter. 2. Pulled up with 10k in adapter 3. Open collector; should be pulled up with 4.7k - 10k on host board to a voltage between 3.15V and 3.6V. 4. Pulled low with 100 in adapter. 5. Per XFI electrical specs. 6. A Reference Clock input is not required. If present, it will be ignored. Differential 100 termination in adapter. 1 1 5 5 1 (c) Finisar Corporation - July 2010 Rev. B1 Page 3 FTLX0011D4BNL Laserwire XFP Adapter Product Specification - July 2010 Figure 1. Diagram of Host Board Connector Block Pin Numbers and Names, for pin-out reference. Details of host-board connector specifications can be found in INF-8077i3. Or refer to Finisar XFP datasheet (e.g., FTLX8511D3) Towards 1 TX- Vee 12 11 10 9 8 Vee 2 TX+ TX- 3 Vee TX+ 4 Vcc Vee 5 F Vcc 6 Fault 7 Cab Abs Cab-Abs 8 NC NC 9 Vee Vee 10 RX+ RX+ 11 RX - RX- 12 Vee Vee Bezel 7 6 5 4 3 2 1 Cable End View Towards ASIC (a) (b) Figure 2. Pinout : (a) Laserwire cable plug end view, (b) Adapter pin-out (Laserwire port endview). (c) Finisar Corporation - July 2010 Rev. B1 Page 4 FTLX0011D4BNL Laserwire XFP Adapter Product Specification - July 2010 III. Absolute Maximum Ratings Exceeding the limits below may damage the transceiver module permanently. Parameter Maximum Supply Voltage Storage Temperature Relative Humidity Symbol Vcc TS RH Min -0.5 -40 0 Typ Max 4.0 85 85 Unit V C % I. Non-condensing. IV. Electrical Characteristics (TOP = -5 to 85C, VCC = 3.14 to 3.46 Volts) Ref. 1 Electrical characteristics assume a Laserwire cable is inserted into the Adapter port. Parameter Supply Voltage Supply Current Transmitter (to Laserwire) Differential data input swing Receiver (from Laserwire) Differential data output swing Power Supply Rejection Symbol Vcc Icc Min 3.14 Vin,pp 120 Vout,pp PSR 600 Typ Max 3.46 400 Unit V mA 1000 mV 650 800 See Note 2 below Ref. mV 1 2 Notes: 1. Into 100 differential termination. 2. Per Section 2.7.1 in the XFP MSA Specification INF-8077i3. V. Environmental Specifications The FTLX0011D4BNL XFP Adapter has an operating temperature range from -5C to +85C case temperature. Note that the LaserwireTM cable has an operating temperature range of 0C to +60C. Parameter Case Operating Temperature Storage Temperature VI. Symbol Top Tsto Min -5 -40 Typ Max 85 85 Units C C Ref. Regulatory Compliance These products are certified by TUV and CSA to meet the Class 1 eye safety requirements of EN (IEC) 60825 and the electrical safety requirements of EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request. (c) Finisar Corporation - July 2010 Rev. B1 Page 5 FTLX0011D4BNL Laserwire XFP Adapter Product Specification - July 2010 VII. Mechanical Specifications Finisar's Laserwire XFP Adapters are compatible with the dimensions defined by the XFP Mechanical Specifications in INF-8077i3, with the exception of the port design to accommodate the Laserwire plug. Figure 3. FTLX0011D4BNL Mechanical Dimensions. (c) Finisar Corporation - July 2010 Rev. B1 Page 6 FTLX0011D4BNL Laserwire XFP Adapter Product Specification - July 2010 VIII. EEPROM Table (Address A0h) Byte Addr Hex 128 80 129 81 LSB 0 0 Bit Size Name 8 Identifier 3 RESERVED Description Type of serial transceiver RESERVED 129 129 129 81 81 81 3 4 5 1 1 1 CLEI code present in Table 02h CLEI code present in Table 02h TX Ref Clock Input Required TX Ref Clock Input Required Module with CDR Module with CDR 129 130 131 131 131 131 131 131 131 131 132 132 132 132 132 133 134 134 134 134 134 134 134 134 135 135 135 135 135 135 135 136 136 136 136 136 136 136 136 137 137 137 137 137 137 137 137 138 138 138 138 139 139 139 139 139 139 81 82 83 83 83 83 83 83 83 83 84 84 84 84 84 85 86 86 86 86 86 86 86 86 87 87 87 87 87 87 87 88 88 88 88 88 88 88 88 89 89 89 89 89 89 89 89 8A 8A 8A 8A 8B 8B 8B 8B 8B 8B 6 0 0 1 2 3 4 5 6 7 0 4 5 6 7 0 0 1 2 3 4 5 6 7 0 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 5 6 7 0 3 4 5 6 7 2 8 1 1 1 1 1 1 1 1 4 1 1 1 1 8 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 1 1 1 3 1 1 1 1 1 Ext.Identifier Connector RESERVED 10GBASE-EW 10GBASE-LW 10GBASE-SW 10GBASE-LRM 10GBASE-ER 10GBASE-LR 10GBASE-SR RESERVED Intermediate Reach 1300 nm Extented Reach 1550 nm 1200-SM-LL-L 1200-MX-SN-I RESERVED RESERVED OC-48-LR OC-48-IR OC-48-SR 2xFC SMF 2xFC MMF 1000BASE-LX/1xFC SMF 1000BASE-SX/1xFC MMF RESERVED I-64.5 I-64.3 I-64.2 I-64.2r I-64.1 I-64.1r RESERVED S-64.5b S-64.5a S-64.3b S-64.3a S-64.2c S-64.2a S-64.1 RESERVED DWDM G.959.1 P1L1-2D2 L-64.3 L-64.2c L-64.2b L-64.2a L-64.1 RESERVED V-64.3 V-64.2b V-64.2a RESERVED RZ NRZ Sonet Scrambled 8B/10B 64B/66B (c) Finisar Corporation - July 2010 Rev. B1 Defines Module Power Class Code for connector type RESERVED 10GBASE-EW 10GBASE-LW 10GBASE-SW 10GBASE-LRM 10GBASE-ER 10GBASE-LR 10GBASE-SR RESERVED Intermediate Reach 1300 nm FP Extented Reach 1550 nm 1200-SM-LL-L 1200-MX-SN-I RESERVED RESERVED Lower speed link compliance code Lower speed link compliance code Lower speed link compliance code Lower speed link compliance code Lower speed link compliance code Lower speed link compliance code Lower speed link compliance code RESERVED Sonet codes Sonet codes Sonet codes Sonet codes Sonet codes Sonet codes RESERVED Sonet Short Haul Link codes Sonet Short Haul Link codes Sonet Short Haul Link codes Sonet Short Haul Link codes Sonet Short Haul Link codes Sonet Short Haul Link codes Sonet Short Haul Link codes RESERVED DWDM Sonet Long Haul Link codes Sonet Long Haul Link codes Sonet Long Haul Link codes Sonet Long Haul Link codes Sonet Long Haul Link codes Sonet Long Haul Link codes RESERVED Sonet Very Long Haul Link codes Sonet Very Long Haul Link codes Sonet Very Long Haul Link codes RESERVED Encoding Support Encoding Support Encoding Support Encoding Support Encoding Support Value XFP No CLEI code present in Table 02h Not Required with CDR Power level 1 ( < 1.5W power dissipation) Unknown Hex Value 6 0 1 0 0 0 FALSE FALSE TRUE FALSE FALSE FALSE TRUE 0 0 1 0 0 0 1 FALSE FALSE FALSE TRUE 0 0 0 1 FALSE FALSE FALSE FALSE FALSE FALSE FALSE 0 0 0 0 0 0 0 FALSE FALSE FALSE FALSE FALSE FALSE 0 0 0 0 0 0 FALSE FALSE FALSE FALSE FALSE FALSE FALSE 0 0 0 0 0 0 0 FALSE FALSE FALSE FALSE FALSE FALSE FALSE 0 0 0 0 0 0 0 FALSE FALSE FALSE 0 0 0 FALSE TRUE TRUE TRUE TRUE 0 1 1 1 1 Page 7 FTLX0011D4BNL Laserwire XFP Adapter Product Specification - July 2010 Byte Addr Hex 140 8C 141 8D 142 8E 143 8F 144 90 145 91 146 92 ... 164 A4 LSB 0 0 0 0 0 0 0 Bit Size 8 8 8 8 8 8 8 0 1 Name BR, minimum BR, maximum Length(SMF)-km Length(EMM-50um)-meter Length(50)-meter Length(62.5)-meter Length(Copper)-km Description Minimum Supported Bitrate (/100Mb) MaximumSupported Bitrate (/100Mb) Length (standard singlemode fiber)-km Length (extended b/w 50 um MMF) (/2m) Length (50um MMF) (/1meter) Length (62.5um MMF) (/1meter) Length (Copper) (/1meter) Value 99 105 0 15 30 30 0 Hex Value 63 69 0 0F 1E 1E 0 CDR support TRUE 1 CDR support RESERVED CDR support CDR support CDR support CDR support CDR support FALSE 0 FALSE FALSE TRUE TRUE TRUE 0 0 1 1 1 164 164 164 164 164 164 164 ... 190 191 A4 A4 A4 A4 A4 A4 A4 1 2 3 4 5 6 7 1 1 1 1 1 1 1 XFI Loopback Supported Lineside Loopback Mode Supported RESERVED CDR support for 11.1 Gb/s CDR support for 10.7 Gb/s CDR support for 10.5 Gb/s CDR support for 10.3 Gb/s CDR support for 9.95 Gb/s BE BF 0 0 8 8 Max Case Temp CC_BASE 192 C0 0 8 Maximum Power 193 C1 0 8 Max Power in Power Down Mode 194 C2 0 4 Max Current +3.3v 194 C2 4 4 Max Current +5v 195 C3 0 4 Max Current -5v 195 ... 220 220 220 220 220 220 221 C3 4 4 Max Current +1.8v DC DC DC DC DC DC DD 0 3 4 5 6 7 0 3 1 1 1 1 1 1 221 DD 1 1 221 DD 2 1 221 DD 3 1 RESERVED Received power meas. Type FEC BER support RESERVED RESERVED RESERVED Optional CMU support mode Wavelength Tunability implemented Active FEC control function umplemented Support VPS bypass regulator mode 221 221 221 DD DD DD 4 5 6 221 DD 222 222 ... Max Case Temp. Checksum (128 to 190) Maximum Power Dissipation, Max power is 8 bit value * 20 mW. Maximum Total Power Dissipation in Power Down Mode, Max Power is 8 bit value * 10 mW. Maximum current required by +3.3V Supply. Max current is 4 bit value * 100 Maximum current required by +5V Supply.Max current is 4 bit value * 50 Maximum current required by -5.2V Supply.Max current is 4 bit value * 50 mA. [500 mA max] Maximum current required by +1.8V Supply. Max current is 4 bit value * 100 85 TBC 55 TBC 75 4B 150 96 3 3 0 0 0 0 0 0 Average power FALSE 1 0 FALSE 0 Enhanced Options FALSE 0 Enhanced Options FALSE 0 Enhanced Options FALSE 0 1 1 1 Suport VPS LV regulator mode Enhanced Options Soft P_Down Enhanced Options Soft TX_DISABLE Enhanced Options FALSE FALSE FALSE 0 0 0 7 1 Variable Power Supply Support Enhanced Options 0 DE 0 4 Aux A/D Input 2 Enhanced Options DE 4 4 Aux A/D Input 1 Enhanced Options FALSE Auxiliary monitoring not implemented Auxiliary monitoring not implemented (c) Finisar Corporation - July 2010 Rev. B1 RESERVED Special functions Special functions RESERVED RESERVED RESERVED Enhanced Options 0 0 Page 8 FTLX0011D4BNL Laserwire XFP Adapter Product Specification - July 2010 IX. References 1. Directive 2002/95/EC of the European Council Parliament and of the Council, "on the restriction of the use of certain hazardous substances in electrical and electronic equipment". January 27, 2003. 2. "Application Note AN-2038: Finisar Implementation Of RoHS Compliant Transceivers", Finisar Corporation, January 21, 2005. 3. "10 Gigabit Small Form Factor Pluggable Module", SFF Document Number INF8077i, Revision 4.5, August 31, 2005. X. For More Information Finisar Corporation 1389 Moffett Park Drive Sunnyvale, CA 94089-1133 Tel. 1-408-548-1000 Fax 1-408-541-6138 sales@finisar.com www.finisar.com (c) Finisar Corporation - July 2010 Rev. B1 Page 9