NON-ISOLATED DC/DC CONVERTERS 10.3 -13.2V Input / Programmable Output / 120A VRM 10.1 G7NC-C2A160 PRELIMINARY * High efficiency means less power dissipation * Remote on/off * Wide input range (10.3 - 13.2V) * 2-Wire Remote sense * 6 bit VID digital voltage programming. * Current monitor signal Description The G7NC-C2A Series is a non-isolated step down DC/DC converter providing up to 120A of output current and designed to be compatible to the Intel VRM 10.1 specification. Standard features include current monitor, remote on/off, over current protection, remote sense and a power good signal. This product also makes use of adaptive positioning to improve transient response performance. These products may be used almost anywhere low-voltage silicon is being employed and a nominal 12V source is available. Typical applications include file servers, work stations and other computing applications. Part Selection Output Voltage 0.83 - 1.6V Input Voltage 12V Output Current (Thermal Design) 105A Output Current (Peak Current) 120A Typical Efficiency TBD% Model Number G7NC-C2160A Input Specifications Parameter Input Voltage Range Input Current (disabled) Input Current (full load) Reflected Ripple Current Min 10.3 VDC Typ Max 13.2 VDC Notes 17mA 11A 400mA rms With 2 330uF, 25mOhm capacitor and 200nH of input inductance. Output Specifications Parameter Output Current Set Point Accuracy Min 0A Typ 1.27V 1.28V Adaptive Positioning (Droop Impedance) Ripple and Noise 0.91 mOhm Turn on Time Transient Response 8mS 20mV Deviation Settling Time Notes Thermal design Peak current rating no load, excluding Adaptive positioning, VID 101101 pk-pk, 0 to 20MHz Bandwidth Full load. Note 3 16mS di/dt = 5A/uS Load step =50% of max load. TBD TBD Remote Sense Compensation Output Capacitance Max 105A 120A 1.29V 0.3VDC TBD uF 8290uF TBD uF Consult factory for applications with external capacitance outside of this range Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 10.3 -13.2V Input / Programmable Output / 120A VRM 10.1 General Specifications Parameter Switching Frequency Dimensions Pin Connections Specification 1.4MHz typical (fixed) inches mm Weight Operating Temperature Non-Operating Temperature Protection Features Over current Undervoltage Remote On/Off Efficiency (full load) 1.3V output 3.8 x 1.2 x 0.962 96.5 x 30.5 x 24.4 TBD 0C to 70C -40C to 100C 110% to 170% max Io UVLO Vin < 10.0V Active High TBD% Row A Pin Function Row B Pin Function 1 VIN54 VIN+ 2 VIN53 VIN+ 3 VIN52 VIN+ 4 VID4 51 VID3 5 VID2 50 VID1 6 VID0 49 VID5 7 VO-sen+ 48 VO-sen8 PWRGD 47 NC 9 OUTEN 46 LL0 10 Imon 45 LL1 11 NC 44 NC 12 NC 43 NC 13 VO+ 42 VO+ 14 VO+ 41 VO+ 15 VO+ 40 VO+ 16 VO39 VO17 VO38 VO18 VO37 VO19 VO+ 36 VO+ 20 VO+ 35 VO+ 21 VO+ 34 VO+ 22 VO33 VO23 VO32 VO24 VO31 VO25 VO+ 30 VO+ 26 VO+ 29 VO+ 27 VO+ 28 VO+ Notes: 1. Mechanical key between pins 3 & 4, 12 & 13, 21 & 22, 33 & 34, 42 & 43, and 51 & 52 2. Contact factory for recommended mating connector. 3. Measured with 14 X 560u 7mOhm ESR Al Poly and 45 X 10u 10mOHm ESR ceramic capacitors on output. 2003 Bel Fuse Inc. Specifications subject to change without notice. 121903 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F/ 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 10.3 -13.2V Input / Programmable Output / 120A VRM 10.1 Voltage Identification (VID) Code VID4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 VID3 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 VID2 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 VID1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 VID0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 VID5 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Vo (VDC) 0.8375 0.85 0.8625 0.875 0.8875 0.9 0.9125 0.925 0.9375 0.95 0.9625 0.975 0.9875 1 1.0125 1.025 1.0375 1.05 1.0625 1.075 1.0875 Output Off Output Off 1.1 1.1125 1.125 1.1375 1.15 1.1625 1.175 1.1875 1.2 1.2125 1.225 1.2375 1.25 1.2625 1.275 1.2875 1.3 1.3125 1.325 1.3375 1.35 1.3625 1.375 1.3875 1.4 1.4125 1.425 1.4375 1.45 1.4625 1.475 1.4875 1.5 1.5125 1.525 1.5375 1.55 1.5625 1.575 1.5875 1.6 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com