PS028609-0213 Disclaimer
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
ii
DO NOT USE THIS PRODUCT IN LIFE SUPPORT SYSTEMS.
LIFE SUPPORT POLICY
ZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICA L COMPONENTS IN LIFE
SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF
THE PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION.
As used herein
Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b)
support or sustain life and whose failure to perform when properly used in accordance with instructions for
use provided in the labeling can be reasonably expected to result in a significant injury to the user. A
critical component is any component in a life support device or system whose failure to perform can be
reasonably expected to cause the failure of the life support device or system or to affect its safety or
effectiveness.
Document Disclaimer
©2013 Zilog, Inc All rights reserved. Information in this publication concerning the devices, applications,
or technology described is intended to suggest possible uses and may be superseded. ZILOG, INC. DOES
NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE
INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO
DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRING EMENT RELATED
IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED
HEREIN OR OTHERWISE. The information contained within this document has been verified according
to the general principles of electrical and mechanical engineering.
ZMOTION and Z8 Encore! XP are trademarks or registered trademarks of Zilog, Inc. (An IXYS
Company). All other product or service names are the property of their respective owners.
Warning:
PS028609-0213 Revision History
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
iii
Revision History
Each instance in the revision history table reflects a change to this document from its pre-
vious revision. For more details, refer to the corresponding pages or appropriate links pro-
vided in the table below.
Date Revision
Level Description Page
Number
Feb
2013 09 Moved NCL-11 lens specification to Table 2; added the
CM 0.77 GI V2 lens specification; alph anumerically reor-
dered all lenses.
2, 8
May
2012 08 Added the NCL-11 and EWA 0.3 GI V2 lens specifica-
tions. 36, 18
Nov
2011 07 Added the NCL-3R and NCL-10S lens specifications. 22, 34
Mar
2011 06 Intrusion lens specifications added. 38
Jan
2011 05 Modifications to some lens/sensor descriptions in Table
2.2
Jan
2011 04 Updated to include two new Nicera sensors. 19, 29
Nov
2010 03 Updated to new Zilog/IXYS logo and accepted Zilog
style; replaced all instances of ePIR with advanced pas-
sive infrared.
All
Sep
2010 02 Replaced Zilog logos, ePIR with ZMOTION, and Zdots
with Module; fixed formatting and pagination issues;
removed references to GP and General Purpose.
All
Oct
2010 01 Original issue All
PS028609-0213 Table of Contents
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
iv
Table of Contents
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
PIR Sensor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ZMOTION Lens Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ZMOTION Detection and Control Lens Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 6
AA 0.9 GI T1 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CM 0.77 GI V2 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CM 0.77 GI V3 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CM 0.77 GI V5 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CWM 0.5 GI V1 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
EWA 0.3 GI V2 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
NCL-3B Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
NCL-3R Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
NCL-9(26) Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
NCL-10IL Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
NCL-10S Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
NCL-11 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
ZMOTION Intrusion Detection Lens Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
LR 1.2 GI 12 V3 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
VB 1.2 GI V1 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
WA 1.2 GI 12 V4 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
PS028609-0213 Overview
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
1
Overview
Zilog’s ZMOTION Detection and Control and Intrusion Detection product families pro-
vide integrated and flexible solutions for Passive Infrared (PIR)-based motion detection
applications. These product families are based on the ZMOTION MCU, a high-perfor-
mance microcontroller featuring integrated PIR motion detection algorithms. Each family
includes a selection of lenses and PIR sensors to fit a wide range of application require-
ments. Each lens and sensor combination is optimized for its intended application by con-
figuration settings loaded into the ZMOTION MCU ensuring the best possible
performance while significantly reducing development risk and minimizing time to mar-
ket. Zilog’s PIR Motion Detection Technology provides a dramatic improvement in both
sensitivity and stability over traditional designs and is scalable to many market segments
including Security/Intrusion Detection, Lighting Control, HVAC, Access Control, Vend-
ing, Display, Proximity, Power Management, Occupancy Sensing and many others.
This document provides the zone patterns and mechanical dimensions for the Zilog-sup-
ported lenses and pyroelectric sensors included in the ZMOTION Family. Each supported
lens and pyroelectric sensor combination is provided with an associated configuration file
for the ZMOTION MCU. It is possible to use other lenses and pyroelectric sensors not
directly supported by Zilo g b y de velop ing the app rop riate co nfig uration settings based on
one of the existing files.
There are two general groups of lenses provided:
•
ZMOTION Detection and Control for general motion detection applications
•
ZMOTION Intrusion Detection for security applications
All lenses and pyroelectric sensors listed in this document are available from Zilog as a
bundle (which includes MCU, lens and pyroelectric sensor) or individually from their
associated manufacturers. Because Zilog is regularly adding new lens support to these
ZMOTION product families, please obtain the latest version of this document from our
website at: www.zilog.com/ZMOTION.
PS028609-0213 PIR Sensor Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
2
PIR Sensor Specifications
The pyroelectric sensors included in the ZMOTION product families are manufactured by
Nippon Ceramic Company Ltd. (Nicera). Please refer to their website for any specific
information you may require.
Table 1 shows the pyroelectric sensors available for both the ZMOTION Detection and
Control and Intrusion Detection Families.
ZMOTION Lens Selection Guide
Select a lens and pyroelectric sensor based on the intended application from Table 2.
Lenses and pyroelectric sensors for security/intrusion-related applications are listed in
Table 3.
Table 1. ZMOTION Pyroelectric Sensors
Manufacturer Part Number Description
Nicera RE200B-P Basic Dual Element
Nicera SDA02-54-P Premium Dual Element
Nicera SBDI46-504AA Quad Element
Table 2. ZMOTION Detection and Control Lenses and Pyroelectric Sensors
Part Number Description Recommended
Applications Configuration
Header File Pyroelectric
Sensor
AA 0.9 GI T1
Lens Specifi-
cation – see
page 7
Animal Alley Array (88°)
35.6mm x 49.9mm Flat
Fresnel lens
22.9mm focal length
25 meter range
22 equal segments
Corner wall mount or very
high ceiling with rectangu-
lar floor pattern
Warehouse Lighting (Bay
Light)
Combined Intrusion and
Lighting Control
HVAC
API_INIT_01.h RE200B-P
SDA02-54-P
Note: *The NCL-11 and EWA 0.3 GI V2 lenses are not currently part of th e standard ZMOTION bundled suite or
offered in ZMOTION development kits. However, the optimized API settings for this len s are available in the
ZMOTION Detection Lens and Pyro Sensor Configuration Guide (WP0018).
PS028609-0213 ZMOTION Lens Selection Guide
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
3
CM 0.77 GI V2
Lens Specifi-
cation – see
page 8
Ceiling Mount Array
(360°)
37mm diameter circular
lens
19.6 mm focal length
12.2 m radius at 3.7 m
height
4:1 floor coverage diame-
ter-to-height ratio
High ceiling mount for
commercial lighting con-
trol
Commercial HVAC
API_INIT_02.h SBDI46-504AA
RE200B-P
CM 0.77 GI V3
Lens Specifi-
cation – see
page 10
Ceiling Mount Array
(360°)
37mm diameter circular
lens
19.6mm focal length
3.7m radius at 2.4m
height
3:1 floor coverage diame-
ter to height ratio
Ceiling Mount for stan-
dard commercial heights
Lighting Control
HVAC Control
Meeting rooms
API_INIT_02.h RE200B-P
SBDI46-504AA
CM 0.77 GI V5
Lens Specifi-
cation – see
page 12
Ceiling Mount Array
(360°)
37mm diameter circular
lens
19.6mm focal length
12.2m radius at 12.2m
height
2:1 floor coverage diame-
ter to height ratio
High ceiling mount for
commercial and industrial
applications
Commercial Lighting Con-
trol
Commercial HVAC Con-
trol
API_INIT_03.h RE200B-P
SBDI46-504AA
CWM 0.5 GI
V1 Lens Speci-
fication – see
page 15
Ceiling/Wall Mount Array
(180°)
Circular lens with 24mm x
24mm square base
14.2mm focal length
Board mount clip-in
Wall or ceiling mount for
office or meeting room
lighting and HVAC control
Room Lighting and HVAC
Control
API_INIT_04.h RE200B-P
SBDI46-504AA
Table 2. ZMOTION Detection and Control Lenses and Pyroelectric Sensors (Continued)
Part Number Description Recommended
Applications Configuration
Header File Pyroelectric
Sensor
Note: *The NCL-11 and EWA 0.3 GI V2 lenses are not currently part of th e standard ZMOTION bundled suite or
offered in ZMOTION development kits. However, the optimized API settings for this len s are available in the
ZMOTION Detection Lens and Pyro Sensor Configuration Guide (WP0018).
PS028609-0213 ZMOTION Lens Selection Guide
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
4
EWA 0.3 GI V2
Lens Specifi-
cation – see
page 18
Extra Wide Angle Wall
Mount Array (180°)
14mm x 28mm
7.6mm focal length
5 meter range
16 equal segments
Room occupancy and
proximity sensing
180° detection with single
pyro
Wall mount room lighting
control
AC light switch replace-
ment
Hotel room thermostats
N/A* RE200B-P
NCL-3B Lens
Specification –
see page 19
10mm wall mount array
(60° x 60°)
Clips on to pyroelectric
sensor
4 beams (X); 2 beams (Y)
10m range
Proximity or Entrance
Detection
Kiosk
Vending
HVAC
Display counters
API_INIT_06.h RE200B-P
NCL-3R Lens
Specification –
see page 22
10mm Wall/Ceiling Mount
Array (80° x 30°)
Clips on to pyroelectric
sensor
6 beams (X); 2 beams (Y)
10m range
Proximity or Entrance
Detection
Kiosk
Vending
HVAC
Display counters
API_INIT_07.h RE200B-P
NCL-9(26)
Lens Specifi-
cation – see
page 26
Clip-on 15mm Array
(360°)
Clips on to pyroelectric
sensor
2.25m radius at 2m height
2.1:1 Floor coverage
diameter to height ratio
Room Occupancy and
Proximity Sensing
Lighting Control
HVAC Control
Appliance
Kiosk/Display Control
Vending Power Ma na ge -
ment Appliance
Power Management
API_INIT_05.h RE200B-P
SBDI46-504AA
Table 2. ZMOTION Detection and Control Lenses and Pyroelectric Sensors (Continued)
Part Number Description Recommended
Applications Configuration
Header File Pyroelectric
Sensor
Note: *The NCL-11 and EWA 0.3 GI V2 lenses are not currently part of th e standard ZMOTION bundled suite or
offered in ZMOTION development kits. However, the optimized API settings for this len s are available in the
ZMOTION Detection Lens and Pyro Sensor Configuration Guide (WP0018).
PS028609-0213 ZMOTION Lens Selection Guide
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
5
NCL-10IL Lens
Specification –
see page 29
10mm Wall/Ceiling Mount
Array (80° x 30°)
Clips on to pyroelectric
sensor
6 beams (X); 2 beams (Y)
10m range
Proximity or Entrance
Detection
Kiosk
Vending
HVAC
Display counters
API_INIT_07.h RE200B-P
NCL-10S Lens
Specification –
see page 34
10mm wall mount (27°)
directional
Clips on to pyroelectric
sensor
2 beams (X), 1 beam (Y)
10m range
Entrance detection
Kiosk
Vending
HVAC
Display counters
API_INIT_09.h RE200B-P
NCL-11 Lens
Specification –
see page 36
Wall mount array 104°
(X), 37° (Y)
32 detection zones
Circuit board mount, black
rectangular lens
4 meter range
Room occupancy and
proximity sensing
Consumer electronics and
appliance po we r mana g e-
ment
Display power manage-
ment
TV auto shut-off
Keypad motion detector
API_INIT_0A* RE200B-P
Table 2. ZMOTION Detection and Control Lenses and Pyroelectric Sensors (Continued)
Part Number Description Recommended
Applications Configuration
Header File Pyroelectric
Sensor
Note: *The NCL-11 and EWA 0.3 GI V2 lenses are not currently part of th e standard ZMOTION bundled suite or
offered in ZMOTION development kits. However, the optimized API settings for this len s are available in the
ZMOTION Detection Lens and Pyro Sensor Configuration Guide (WP0018).
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
6
ZMOTION Detection and Control Lens Specifications
Figures 1 through 27 on the following pages discuss the specifications of the lenses
selected for the ZMOTION Detection and Control family of products. To see specifica-
tions for lenses used in security and intrusion detection applications, refer to the ZMO-
TION Intrusion Detection Lens Specifications section on page 38.
Table 3. ZMOTION Intrusion Detection Lenses and Pyroelectric Sensors
Part Number Description Typical Applications Configuration
Header File Pyroelectric
Sensor
LR 1.2 GI 12
V3 Lens Speci-
fication – see
page 39
Long Range Array
42.6 mm x 61.0 mm Flat
Fresnel
30.5 mm (1.2ʺ) focal
length
30.5 meter (100 ') ra ng e
3:1 floor coverage diame-
ter to height ratio
Wall mount long range
corridor/hallway security/
intrusion motion detector
API_INIT_10.h RE200B-P
VB 1.2 GI V1
Lens Specifi-
cation – see
page 40
Vertical Barrier Array
42.6 mm x 61.0 mm Flat
Fresnel
30.5 mm (1.2ʺ) focal
length
15 meter ran ge, hor izontal
7 meter range, vertical
Wall or ceiling mount cur-
tain or vertical barrier
security/intrusion motion
detector
API_INIT_11.h RE200B-P
WA 1.2 GI 12
V4 Lens Speci-
fication – see
page 41
Wide Angle Array (88°)
42.6 mm x 61.0 mm Flat
Fresnel
30.5 mm (1.2ʺ) focal
length
18 meter range
Corner/Wall Mount secu-
rity/intrusion motion
detector
Pet immune detector
Wide area security motion
detector
API_INIT_09.h RE200B-P
Note: *The NCL-11 and EWA 0.3 GI V2 lenses are not currently part of th e standard ZMOTION bundled suite or
offered in ZMOTION development kits. However, the optimized API settings for this len s are available in the
ZMOTION Detection Lens and Pyro Sensor Configuration Guide (WP0018).
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
7
AA 0.9 GI T1 Lens Specification
The AA 0.9 GI T1 lens array is optimized for dual element pyroelectric sensors in long
range sensing applications. It is normally used with the grooved side facing the pyroelec-
tric detector, and curved at a 0.9 inch (22.9 mm) radius about the sensitive area of the
detector. The detector position should be 0.492" (12.5 mm) below the upper edge, and cen-
tered left-right.
Figure 1. The AA 0.9 GI T1 Lens Specification
88°
15 m
(45ft)
AA 0.9 GI T1
15 m
(45ft)
12.5mm
(.492in)
2.1m
(6.8ft)
15m
(45ft)
TOP VIEW:
SIDE VIEW:
TOP VIEW:
SIDE VIEW:
FRONT VIEW:
0
49.9mm
(1.965in)
35.6mm
(1.400in)
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
8
CM 0.77 GI V2 Lens Specification
The CM 0.77 GI V2 lens is intended for high ceiling-mounted commercial lighting and HVAC
applications in which high flo or coverage is required. See F igures 2 and 3.
Figure 2. CM 0.77 GI V2 Lens Specification: Front View
TOP VIEW:
C
L
C
L
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
SIDE VIEW:
0
8ft
(2.4m)
C
L
11.7mm
(0.46in) 19.6mm
(0.77in)
Detector Position
Grooved Side
52.5mm
(2.066in)
7.8mm
(0.3in)
Notch Radius 1.5mm (0.060in)
0
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
15°
Inactive Area
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
02.4m
(8ft)
4.3m
(14ft)
7.3m
(24ft)
0.9m
(3ft)
7.3m
(24ft)
4.3m
(14ft)
2.4m
(8ft)
0.9m
(3ft)
0.9m
(3ft)
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
9
Figure 3. CM 0.77 GI V2 Lens Specification: Floor Coverage, Side View
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
(For mounting height of 2.4m (8ft))
SIDE VIEW:
0
8ft
(2.4m)
10ft
(3.0m)
12ft
(3.7m)
0
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
C
L
C
L
012.2m
(40ft)
9.1m
(30ft)
6.1m
(20ft)
3.0m
(10ft)
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
12.2m
(40ft)
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
10
CM 0.77 GI V3 Lens Specification
The CM 0.77 GI V3 lens array is intended for ceiling-mounted applications and is opti-
mized for use with both dual and quad element pyroelectric sensors. The detector mount-
ing flange should be 0.46" (11.7 mm) from the pyroelectric sensor’s element. The angle
from the center line to the placement notch is 15 degrees.
Figure 4. The CM 0.77 GI V3 Lens Specification, #1 of 2
TOP VIEW:
C
L
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
C
L
FRONT VIEW :
11.7mm
(0.46in) 19.6mm
(0.77in)
Detector Position
Grooved Side
52.5mm
(2.066in)
7.8mm
(0.3in)
Notch Radius 1.5mm (0.060in)
0
1.5m
(5ft)
3.0m
(10ft)
4.6m
(15ft)
1.5m
(5ft)
3.0m
(10ft)
4.6m
(15ft)
CEILING MOUNT ARRAY
CM 0.77 GI V3
SIDE VIEW:
0
8ft
(2.4m)
0.9m
(3ft)
1.5m
(5ft)
2.1m
(7ft)
2.7m
(9ft)
3.7m
(12ft)
00.9m
(3ft)
1.5m
(5ft)
2.1m
(7ft)
2.7m
(9ft)
3.7m
(12ft)
0.9m
(3ft)
C
L
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
11
Figure 5. The CM 0.77 GI V3 Lens Specification, #2 of 2
fresnel technologies inc.
1995 101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817) 926-7146
SIDE VIEW:
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
gg
C
L
C
L
0
1.5m
(5ft)
3.0m
(10ft)
4.6m
(15ft)
1.5m
(5ft)
3.0m
(10ft)
4.6m
(15ft)
0
06.1m
(20ft)
4.6m
(15ft)
3.0m
(10ft)
1.5m
(5ft)
1.5m
(5ft)
1.5m
(5ft)
3.0m
(10ft)
4.6m
(15ft)
6.1m
(20ft)
8ft
(2.4m)
10ft
(3.0m)
12ft
(3.7m)
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
12
CM 0.77 GI V5 Lens Specification
The CM 0.77 GI V5 lens array is intended for ceiling-mounted applications and is opti-
mized for both dual and quad element pyroelectric detectors. The detector mounting
flange should be 0.46" (11.7 mm) from the pyroelectric sensor’s element.
Figure 6. The CM 0.77 GI V3 Lens Specification, #1 of 3
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817) 926-7146
TOP VIEW:
C
L
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
C
L
FRONT VIEW :
11.68mm
(0.46in) 19.56mm
(0.77in)
Detector Position
Grooved Side
52.5mm
(2.066in)
7.82mm
(0.308in)
0
1.5m
(5ft)
3.0m
(10ft)
4.6m
(15ft)
1.5m
(5ft)
3.0m
(10ft)
4.6m
(15ft)
CEILING MOUNT ARRAY
CM 0.77 GI V5
SIDE VIEW:
0
0.9m
(3ft)
1.5m
(5ft)
2.1m
(7ft)
2.7m
(9ft)
3.7m
(12ft)
0
1.5m
(5ft)
2.1m
(7ft)
2.7m
(9ft)
3.7m
(12ft)
0.9m
(3ft)
C
L
Notch Radius 1.52mm (0.060in) 15°
8ft
fresnel technologies inc.
2008
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
13
Figure 7. The CM 0.77 GI V3 Lens Specification, #2 of 3
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817) 926-7146
SIDE VIEW:
CEILING MOUNT ARRAY
CM 0.77 GI V5
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
FLOOR
COVERAGE:
(For mounting height of 12.2m (30ft))
C
L
C
L
03.0m
(10ft)
3.0m
(10ft)
0
12.2m
12.2m
(40ft)
(40ft)
9.1m
9.1m
(30ft)
(30ft)
6.1m
6.1m
(20ft)
(20ft)
3.0m
(10ft)
3.0m
(10ft)
6.1m6.1m
(20ft)(20ft)
9.1m9.1m
(30ft)(30ft)
12.2m12.2m
(40ft)(40ft)
0
12.2m
(40ft)
6.1m
9.1m
(20ft)
(30ft)
fresnel technologies inc.
2008
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
14
Figure 8. The CM 0.77 GI V3 Lens Specification, #3 of 3
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817) 926-7146
SIDE VIEW:
CEILING MOUNT ARRAY
CM 0.77 GI V5
FLOOR
COVERAGE:
(For mounting height of 12.2m (30ft),
and when a 4 element is used )
03.0m
(10ft)
3.0m
(10ft)
6.1m
(20ft)
6.1m
(20ft)
9.1m9.1m
(30ft)(30ft)
12.2m12.2m
(40ft)(40ft)
0
12.2m
12.2m
(40ft)
(40ft)
9.1m
9.1m
(30ft)
(30ft)
6.1m
6.1m
(20ft)
(20ft)
3.0m
(10ft)
3.0m
(10ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
0
12.2m
(40ft)
9.1m
(30ft)
C
L
C
L
6.1m
(20ft)
fresnel technologies inc.
2008
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
15
CWM 0.5 GI V1 Lens Specification
The CWM 0.5 GI V1 lens array is intended for both wall and ceiling-mounted applications
and is optimized for both dual and quad element pyroelectric detectors. The lens is
intended to clip directly into the circuit board over top of the pyroelectric sensor.
Figure 9. The CM 0.5 GI V1 Lens Specification: Wall Mount
(30ft)
9.1m
(14ft)
4.3m
(8ft)
2.4m
SIDE VIEW:
TOP VIEW:
0m
0m
(4ft)
1.2m
(30ft)
9.1m
(30ft)
9.1m
(15ft)
4.6m
(15ft)
4.6m
180°
FRONT VIEW:
1mm R
(0.04in)
24mm
(0.94in)
24mm
(0.94in)
2mm R
(0.08in)
TOP VIEW:
14.2mm
(0.56in)
12mm
(0.47in)
5.2mm
(0.2in)
CLIP DETAILS:
(Scale 10:1)
3.2mm
(0.125in)
1mm
(0.04in)
1.7mm
(0.065in)
2.5mm
(0.1in)
1.5mm
(0.06in)
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
16
Figure 10. The CM 0.5 GI V1 Lens Specification: Ceiling Mount, #1 of 2
TOP VIEW:
C
L
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
0
1.5m
(5ft)
3.0m
(10ft)
4.6m
(15ft)
1.5m
(5ft)
3.0m
(10ft)
4.6m
(15ft)
CEILING MOUNT ARRAY
CWM 0.5 GI V1
SIDE VIEW:
0
0.9m
(3ft)
1.5m
(5ft)
2.1m
(7ft)
2.7m
(9ft)
3.7m
(12ft)
0
1.5m
(5ft)
2.1m
(7ft)
2.7m
(9ft)
3.7m
(12ft)
0.9m
(3ft)
C
L
8ft
fresnel technologies inc.
2009
FRONT VIEW :
1mm R
(0.04in)
24mm
(0.94in)
24mm
(0.94in)
2mm R
(0.08in)
14.2mm
(0.56in)
12mm
(0.47in)
5.2mm
(0.2in)
CLIP DETAILS:
(Scale 10:1)
3.2mm
(0.125in)
1mm
(0.04in)
1.7mm
(0.065in)
2.5mm
(0.1in)
1.5mm
(0.06in)
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
17
Figure 11. The CM 0.5 GI V1 Lens Spec ification: Ceiling Mount, #2 of 2
SIDE VIEW:
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
(gg())
0
3.0m
(10ft)
3.0m
(10ft)
0
9.1m
(30ft)
6.1m
6.1m
(20ft)
3.0m
(10ft)
3.0m
(10ft)
6.1m 6.1m
(20ft) (20ft)
9.1m 9.1m
(30ft) (30ft)
0
fresnel technologies inc.
2009
(20ft)
9.1m
(30ft)
7.6 m
(25ft)
4.6 m
(15ft)
C
L
C
L
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
18
EWA 0.3 GI V2 Lens Specification
The EWA 0.3 GI V2 lens is intended for wall-mounted room occu pancy and proximity sen s-
ing applications in which an extra-wide sensing an gle is requi red. See Figure 12.
Figure 12. The EWA 0.3 GI V2 Lens Specification, Dimensions
TOP VIEW:
SIDE VI EW:
4.6 m
ACTUAL SIZE
4.6 m
4.6m
22.4mm
(0.88in)
28.4mm
(1.12in)
7.6mm
(0.3in )
13.8mm
(0.54in)
1.0"
(25.4mm)
.30"
(7.6mm)
0.07"
0.08"
0.09"
0.2"
Sensitive
Element
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
19
NCL-3B Lens Specification
The NCL-3B lens is intended for wall-mounted entrance and proximity-sensing applica-
tions.
Figure 13. The NCL-3B Lens Dimensions
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
20
Figure 14. The NCL-3B Lens Specification, X Axis
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
21
Figure 15. The NCL-3B Lens Specification, Y Axis
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
22
NCL-3R Lens Specification
The NCL-3R lens is intended for wall-mounted entrance and proximity-sensing applica-
tions. This lens features two orientations, Tab A and Tab B, that can be used with the pyro-
electric sensor to provide different beam patterns. Figures 16 through 19 .
Figure 16. The NCL-3R Lens Specification, Dimensions
7ROHUDQFH
5
ȭ
ȭ
ȭ
ȭ
5
7$% GLUHFWLRQ $
7$% GLUHFWLRQ %
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
23
Figure 17. The NCL-3R Dual Element Lens Specification, Tab Direction A, X Ax is
),(/' 2) 9,(: '8$/ 7<3( (/(0(17 6,=( *DSPP
7$% GLUHFWLRQ $
81,7 >P@
<
; ;
;
P
P
P
P
;
<
P
P
$
%
P
P
㺽
㺽
P
P
<
>'HWHFWLRQ $UHD LQ IURQW RI P@
'LVWDQFH㸸 P
<
P
P
P
P
㺽
㺽
㺽
㺽
㺽
㺽
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
24
Figure 18. The NCL-3R Dual Element Lens Specification, Tab Direction A, Y Ax is
),(/' 2) 9,(: '8$/ 7<3( (/(0(17 6,=( *DSPP
7$% GLUHFWLRQ %
81,7 >P@
;
P
P
P
P
;
<
P
P
$
%
P
P
P
P
;
;
<<
㺽
㺽
>'HWHFWLRQ $UHD LQ IURQW RI P@
'LVWDQFH㸸 P
<
P
P
P
P
㺽
㺽
㺽
㺽
㺽
㺽
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
25
Figure 19. The NCL-3R Quad Element Lens Specification, Tab Directio n A, X Axis
),(/' 2) 9,(: (/(0(17 7<3( (/(0(17 6,=( *DSPP
7$% GLUHFWLRQ $
<
; ;
;
P
P
P
P
;
<
P
P
$
%
P
P
㺽
㺽
P
P
<
<
P
P
P
P
㺽
㺽
㺽
㺽
㺽
㺽
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
26
NCL-9(26) Lens Specification
The NCL-9(26) lens is intended for ceiling-mounted and other general purpose motion
sensing applications. It is optimized for both dual and quad element pyroelectric sensors.
Figure 20. The NCL-9(26) Lens Specification, #1 of 3
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
27
Figure 21. The NCL-9(26) Lens Specification, #2 of 3
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
28
Figure 22. The NCL-9(26) Lens Specification, #3 of 3
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
29
NCL-10IL Lens Specification
The NCL-10IL lens is intended for wall -mounted entrance and proximity-sensing applica-
tions. This lens features two orientations, Tab A and Tab B, that can be used with the pyro-
electric sensor to provide different beam patterns. Refer to Figures 24 and 25 for the Tab A
beam patterns and to Figures 26 and 27 for the Tab B beam patterns.
Figure 23. Th e NCL- 1 0I L Le n s Specificat io n , Dime ns io n s
5
ȭ
ȭ
ȭ
ȭ
5
7$% GLUHFWLRQ $
7$% GLUHFWLRQ %
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
30
Figure 24. The NCL-10IL Lens Specification, Tab Direction A, X Axis
㹗
㹖
㹖
'8$/ (/(0(17 7<3(
7$% GLUHFWLRQ $
㹖D[LV
7$% GLUHFWLRQ $
7$% GLUHFWLRQ %
(/(0(17 6,=( *DSPP
㺽
㺽
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
31
Figure 25. The NCL-10IL Lens Specification, Tab Direction A, Y Axis
(/(0(17 7<3(
(/(0(17 6,=( *DSPP
㹗D[LV
7$% GLUHFWLRQ $
㹗
㹗
㹖
7$% GLUHFWLRQ $
7$% GLUHFWLRQ %
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
32
Figure 26. The NCL-10IL Lens Specification, Tab Direction B, X Axis
(/(0(17 7<3(
(/(0(17 6,=( *DSPP
7$% GLUHFWLRQ %
㹖 D[LV
㹖
㹗
㹖
7$% GLUHFWLRQ $
7$% GLUHFWLRQ %
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
33
Figure 27. The NCL-10IL Lens Specification, Tab Direction B, Y Axis
(/(0(17 7<3(
(/(0(17 6,=( *DSPP
㹗D[LV
7$% GLUHFWLRQ %
㺽
㺽
㹗
㹗
㹖
7$% GLUHFWLRQ $
7$% GLUHFWLRQ %
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
34
NCL-10S Lens Specification
The NCL-10S lens is intended for wall-mounted entrance detection applications wherein
directional recognition is required. See Figures 28 and 29.
Figure 28. The NCL-10S Lens Specification, Dimensions
',0(16,21 81,7 >PP@
7ROHUDQFH
࠙$$ࠚ
7$% GLUHFWLRQ %
7$% GLUHFWLRQ $
࠙%$6( 9,(:ࠚ
࠙6,'( 9,(:ࠚ
࠙723 9,(:ࠚ
$
$
㺽
ȭ
ȭ
ȭ
5
$$
5
5
ȭ
ȭ
7H[WXULQJ DUHD
/HQV DUHDȭ
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
35
Figure 29. The NCL-10S Dual Element Lens Specification, X/Y Axes
),(/' 2) 9,(:
81,7 >P@
㹖
㹗
6,1*/( (/(0(17 7<3(
(/(0(17 6,=( ȭPP
㹖㸪㹗 D[LV
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
36
NCL-11 Lens Specification
The NCL-11 lens is intended for wall-mounted room occupancy and proximity sensing
applications with 32 detection zones. See Figures 30 and 31.
Figure 30. The NCL-11 Lens Specification, Dimensions
PS028609-0213 ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
37
Figure 31. The NCL- 11 Detection Area, X/Y A xes
PS028609-0213 ZMOTION Intrusion Detectio n Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
38
ZMOTION Intrusion Detection Lens Specifications
Figures 34 through 33 provide the zone patterns and mechanical dimensions for the ZMO-
TION Intrusion Detection family of products. Recommended placement of the pyroelectric
sensor is provided with the detector and lens inclined down wa rd at an angle of 12 d eg r ees.
If you wish to use a tilt angle other than 12 degrees while maintaining the specified zone
patterns, move the pyroelectric sensor up by 0.021" (0.53 mm) for each degree less than 12
degrees, or down by the same amount for each degree greater than 12 degrees.
The WA 1.2 GI 12 V4, LR 1.2 GI 12 V3 and VB 1.2 GI V 1 len ses can be interchang ed in
the same end product without modifications to the placement or angle of the lens.
These lenses may also be used in nonintrusion applications. For additional lenses that do
not require security/intrusion detection capabilities , refer to the
ZMOTION Dete c tion and
Control Lens Specifications
section on page 6.
PS028609-0213 ZMOTION Intrusion Detectio n Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
39
LR 1.2 GI 12 V3 Lens Specification
The LR 1.2 GI 12 V3 lens array is optimized for dual-element pyroelectric sensors in
long-range corridor security applications. It is normally used with the grooved side facing
the pyroelectric detector , and curved at a 1.2 inch (30.5 mm) radius about the sensitive area
of the detector . The detector and the lens array should be inclined downward at an angle of
12 degrees. If you wish to use a tilt angle other than 12 degrees while maintaining the
specified zone pattern, move the pyroelectric sensor up by 0.021" (0.53 mm) for each
degree less than 12 degrees, or down by the same amount for each degree greater tha n 12
degrees. The detector position should be 0.812" (20.6 mm) below the upper edge, and cen-
tered left-to-right.
Figure 32. LR 1.2 GI 12 V3 Lens Specification
FRONT VIEW:
SIDE VIEW:
6.5°
TOP VIEW:
2.5m
(8ft)
0C
L
77°
29°
21.5°
14°
5m
(16ft)
5.0m
(16ft)
2.5m
(8ft)
(100ft)
30.5m
18.3m
(60ft)
2.2m
(7ft)
1m
(3ft)
2.1m
(6.8ft)
3m
(10ft)
10.7m
(35ft)
61mm
(2.4in)
(1.675in)
42.6mm
20.6mm
(0.81in)
PS028609-0213 ZMOTION Intrusion Detectio n Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
40
VB 1.2 GI V1 Lens Specification
The VB 1.2 GI V1 lens array is optimized for dual-element pyroelectric sensors in vertical
barrier or curtain-type security applications. It is normally used with the grooved side fac-
ing the pyroelectric detector , and curved at a 1.2 inch (30.5 mm) radi us about the sensitive
area of the detector. The detector and the lens array should be inclined downward at an
angle of 12 degrees. If you wish to use a tilt angle other than 12 degrees while maintaining
the specified zone pattern, move the pyroelectric sensor up by 0.021" (0.53mm) for each
degree less than 12 degrees, or down by the same amount for each degree greater tha n 12
degrees. The detector position should be 0.812" (20.6 mm) below the upper edge, and cen-
tered left-to-right.
Figure 33. VB 1.2 GI V1 Lens Specification
PS028609-0213 ZMOTION Intrusion Detectio n Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
41
WA 1.2 GI 12 V4 Lens Specification
The WA 1.2 GI 12 V4 lens array is optimized for dual-element pyroelectric sensors in
large-area security applications. It is normally used with the grooved side facing the pyro-
electric detector, and curved at a 1.2 inch (30.5 mm) radius about the sensitive area of the
detector. The detector and the lens array should be inclined downward at an angle of 12
degrees. If you wish to use a tilt angle other than 12 degrees while maintaining the speci-
fied zone pattern, move the pyroelectric sensor up by 0.021" (0.53 mm) for each degree
less than 12 degrees, or down by the same amount for each degree greater than 12 degrees.
The detector position should be 0.812" (20.6 mm) below the upper edge, and centered left-
to-right.
Figure 34. WA 1.2 GI 12 V4 Lens Specificat ion
TOP VIEW:
0
5m
10m
5m
10m
(33ft)
(16ft)
(16ft)
(33ft)
88.2°
(6ft) (12ft) (23ft) (60ft)(51ft)
SIDE VIEW:
2.1m
(6.8ft)
1.7m 3.7m 7m 18m
15.6m
20.6mm
(0.81in)
FRONT VIEW:
(1.675in)
42.6mm
(2.4in)
61mm
PS028609-0213 Related Documents
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
42
Related Documents
Additional information about the ZMOTION Families of Motion Detection MCUs can be
found in the following documents, which are available from the Zilog website at
www.zilog.com.
Document
Number Description
PB0225 ZMOTION Detec tio n an d Control Family Product Brief
PS0285 ZMOTION De tection and Contro l Family Product Specification
PB0230 ZMOTION Intrusion Detection Product Brief
PS0288 ZMOTION Intrusion Detection Product Specification
PS0228 Z8 Encore! XP® F082A Series Product Specification
AN0307 ZMOTION Detection Module Application Walkthrough
AN0309 ZMOT IO N Hig h Brig ht ne ss Wh ite LE D Ligh tin g Applica tion Note
WP0017 A New PIR Motion Detection Architecture White Paper
WP0018 ZMOTION Detection Lens and Pyro Sensor Configura tion Guid e
Other ZMOTION Family Products
PB0223 ZMOTION Detection Module Product Brief
PS0284 ZMOTION Detection Module Product Specification
PS028609-0213 Customer Support
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
43
Customer Support
To share comments, get your technical questions answered, o r report issues you may be
experiencing with our products, please visit Zilog’s Technical Support page at
http://support.zilog.com.
To learn more about this product, find additional documentation, or to discover other fac-
ets about Zilog product offerings, please visit the Zilog Knowledge Base at http://
zilog.com/kb or consider participating in the Zilog Forum at http://zilog.com/forum.
This publication is subject to replacement by a later edition. To determine whether a later
edition exists, please visit the Zilog website at http://www.zilog.com.
