K4 SNAP-IN TOGGLES SEALED, ILLUMINATED SNAP-IN TOGGLE LOW COST, SNAP-IN TOGGLE FOR WET & DUSTY ENVIRONMENTS, 1 & 2 POLES The K4 series snap-in toggle switches are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and industrial control applications. They are totally sealed so the switch can withstand direct water spray and submersion, even during operation. Sealed to IP68S with an optional panel seal available. The K4 series is offered in single and double pole configurations. Toggle action includes 2 and 3-position, momentary and maintained operation in a combination of 13 variations. Mounting is simple and quick; snaps into panel from the front. The OTTO snap-in design supports a variety of panel thicknesses with just one cutout size specified. Existing unsealed applications are easily upgraded to sealed functionality because the K series drops into existing panel cutouts. Single & Double Pole A choice of models are offered to handle current from 16 amps to low level electronic switching levels. LED, Neon or Incandescent Illumination Features: * Withstands direct water spray * Sealed to IP68S * Fits industry standard panel openings for drop-in replacement of panel sealed & unsealed switches * Snap-in feature accommodates a wide range of panel cutouts * Switches up to 16 amps * UV & solvent resistant * Withstands extreme shock & vibration * Legends & illuminated function indicators available * 2 & 3-position, momentary, maintained action and center OFF * RoHS & WEEE compliant Standard Characteristics/Ratings: ELECTRICAL RATINGS: Load Sea Level @ 28VDC or 125/250VAC, 60Hz Cycles Resistive 16A 25,000 Resistive 10A 50,000 Inductive 10A 25,000 Lamp 5A 25,000 Motor 0.5HP 25,000 DWV 1050Vrms except across light terminals Low Level 10mA @ 30mV Electrical Life: See Rating Chart 100,000 LIGHTING: Light Source Rating Incandescent (VDC) 6V, 12V, 24V Neon (VAC) 125V, 250V LED (VDC) 2V, 6V, 12V, 24V Mechanical Life: 100,000 cycles Seal: IP68S Operating Temp Range: -30C to +85C MATERIALS: 108 OTTO Full Line Catalog Case: Thermoplastic Toggle: Stainless steel Terminals/Contact: Brass, silver alloy with silver plate, gold plate for low level Terminal Hardware: Screws and lockwashers provided when applicable K4 series recommended Quick Connect terminals: AMP 60253-2 for 12-16 AWG AMP 42100-2 for 14-18 AWG Mounting Hardware: None provided Specifications Subject To Change Without Notice K4 SEALED, ILLUMINATED SNAP-IN TOGGLE SNAP-IN TOGGLES LOW COST, SNAP-IN TOGGLE FOR WET & DUSTY ENVIRONMENTS, 1 & 2 POLES K4 Series ROCKER SWITCHES K4 SERIES PART NUMBER CODE K4 X Terminal Style/ Switch Rating Actuator Style A. Q.C./Std. B. Screw/Std. C. Solder/Std. D. Q.C./Low Level E. Screw/Low Level F. Solder/Low Level A. Bat Handle NOTE: Contact factory for panel recommendations on switches with potting cups. X X Switch Action/Circuit A. B. C. D. E. F. G. H. J. K. L. M. N. P. Position Position Position Circuit "A" "B" "C" ON None OFF SPST ON None ON SPDT (ON) None OFF SPST (ON) None ON SPDT (ON) OFF (ON) SPDT ON OFF ON SPDT (ON) OFF ON SPDT ON None OFF DPST ON None ON DPDT (ON) None OFF DPST (ON) None ON DPDT (ON) OFF (ON) DPDT ON OFF ON DPDT (ON) OFF ON DPDT NOTE: ( ) denotes momentary action. Optional Panel Gasket: P/N 807038-1 0.062" thickness P/N 807038-2 0.031" thickness K4 Connector P/N C801765 C1 C2 ORDERING INFORMATION X Light Type A. No Light B. 6V Incandescent C. 12V Incandescent D. 24V Incandescent E. 125VAC Neon F. 250VAC Neon G. 2V Red LED H. 2V Green LED J. 2V Amber LED K. 6V Red LED L. 6V Green LED M.6V Amber LED N. 12V Red LED P. 12V Green LED Q. 12V Amber LED R. 24V Red LED S. 24V Green LED T. 24V Amber LED X X Lens Color Position "A" A. No Lens B. Red C. Green D. Amber E. Clear Position "B" A. No Lens B. Red C. Green D. Amber E. Clear NOTES: * No momentary switches with dependent lights. * Neon lamps only to be coded with clear or amber lenses. * LED lenses must be clear or same color as LED. * No legends on lamp side of switch. * No dependent light in OFF positions. * All legends printed on actuators without lens(es) will be white except actuator codes C, F, J, M & R. * All legends printed on lenses will be white except on clear lens(es) will be black. Example: K4AAKEEABA specifies Q.C. terminals, standard rating; bat handle; DPST two position momentary ON, maintained OFF; 125VAC neon light; clear lens in positions "A", no lens in position "C"; dependent light ON in position "A", wired to terminals 1 & 7; no legend. Specifications Subject To Change Without Notice X X Light/Circuit Location Legend & Orientation A. No Light A. No Legend G. B. B. Dependent Light ON in position "A" Wired to terms 1 & 7 C. Dependent Light ON in position "A" Wired to terms 1 & 7 Independent Light at position "C" Wired to terms 7 & 8 Dependent Light ON in position "C" Wired to terms 2 & 8 H. D. Independent Light at position "A" Wired to terms 7 & 8 Dependent Light ON in position "C" Wired to terms 2 & 8 Independent Light at position "A" Wired to terms 7 & 8 E. Independent Light at position "C" Wired to terms 7 & 8 F. C. D. E. F. G. H. J. J. Independent Light at position "A" Wired to terms 3 & 7 Independent Light at position "C" Wired to terms 4 & 8 Not available in DP Dependent Light ON in position "A" Wired to terms 1 & 7 Dependent Light ON in position "C" Wired to terms 2 & 8 K. L. M. N. P. R. NOTE: LED anode (+) terminal number shown in bold. D = Dependent Light I = Independent Light All legends are white. Legend cannot be on the same side as the lens. www.ottoexcellence.com 109