SNAP-UP1-ADS - OPTO 22 - Datasheet.Live

SNAP Ultimate Brain

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE

DATA SHEET

Form 1291-120917

SNAP Ultimate Brain

Features

Programmable I/O and communications processor

I10/100 Mbps Ethernet, automatic speed negotiation

RS-232 serial port for optional modem connection

using PPP

Simultaneous communication using Modbus/TCP,

SNMP, SMTP, FTP, and OptoMMP protocols

Description

PLEASE NOTE: Although fully supported and still in production,

this is a legacy product and not recommended for new designs.

For new development, we recommend using SNAP PAC R-series

controllers instead of SNAP Ultimate I/O. SNAP PAC R-series

controllers are more powerful, have two Ethernet network

interfaces, can run PAC Project software, and are priced lower. See

Opto 22 form #1594, the SNAP PAC R-Series Controller Data

Sheet, for details.

The SNAP Ultimate brain is an I/O and communications

processor mounted on a standard SNAP rack. SNAP Ultimate

I/O brings processing power, programmability, networking

capability, and enterprise connectivity to the I/O level.

This intelligence, programmability, and connectivity simplifies

your control system design and expands the range of

application solutions you can deliver. Besides running control

programs at the I/O level and eliminating the need for

separate controllers, the SNAP Ultimate controller/brain also

has the ability to simultaneously communicate with multiple

devices using Modbus®/TCP, SNMP, SMTP, FTP, and other

protocols.

The connectivity with standard TCP/IP Ethernet networks first

introduced with SNAP Ethernet I/O also applies to SNAP

Ultimate I/O. You can attach a SNAP Ultimate controller/brain

to existing wired or wireless Ethernet networks, making it easy

to add monitoring and control capabilities. Or you can use

standard Ethernet hardware to build an independent control

network, connecting your PC directly to I/O.

Communication with SNAP Ultimate I/O can also be

established via a modem connection using Point-to-Point

Protocol (PPP). Wireless or wireline modem connections are

ideal for remote locations where an Ethernet network is not

practical.

Three models of the compact SNAP Ultimate controller/brain

are available:

•The SNAP-UP1-ADS interfaces with a mix of Opto 22 SNAP

I/O™ analog, digital, and serial modules.

•The digital-only SNAP-UP1-D64 handles up to 64 points of

simple digital I/O (16 modules) on one mounting rack.

•The SNAP-UP1-M64 handles up to 16 analog, digital, and

serial modules on a special rack that can accommodate

digital modules in any location. Digital functions are

simplified.

All SNAP Ultimate controller/brains include a battery-backed

real-time clock to time stamp email messages and data log

entries. Data logs are stored locally on the brain for convenient

access. A standard RJ-45 twisted-pair connector provides both

10 and 100 Mbps Fast Ethernet compatibility with automatic

speed negotiation. The brain also includes an RS-232 serial

connector, which can be used for modem communication,

programming, diagnostics, and direct connection to serial

devices.

With an Opto 22 mounting rack and standard SNAP I/O

modules, the brain can be used as a combination controller

and I/O unit or simply as a capable I/O unit. As an I/O unit, it

provides distributed intelligence when used with a standalone

Opto 22 industrial controller such as the SNAP PAC S-series, or

with a SNAP PAC R-series on-the-rack controller.

Part Numbers

Part Description

SNAP-UP1-ADS Analog/Digital/Serial SNAP Ultimate Brain

SNAP-UP1-D64 Digital-Only SNAP Ultimate Brain

SNAP-UP1-M64 Analog/Simple Digital/Serial SNAP

Ultimate Brain

SNAP Ultimate Brain

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

SNAP Ultimate Brain

PAGE

DATA SHEET

Form 1291-120917

Programming Options

The SNAP Ultimate brain is programmed using Opto 22’s

ioProject™ Basic software suite, which is included with your

purchase of the controller/brain. ioControl Basic includes:

• ioControl™, a graphical, flowchart-based programming

tool developing software applications to monitor, control,

and acquire date from equipment, processes, and devices.

In addition to flowchart programming, ioControl includes a

powerful, built-in scripting language based on C and other

procedural languages.

•ioDisplay

™, an intuitive package for building operator

interfaces (HMIs) for your Microsoft® Windows®-based

clients communicating with a SNAP Ultimate I/O system.

ioDisplay offers a full-featured HMI including alarming,

trending, and a built-in library of 3,000 industrial

automation graphics.

• ioManager™, a utility application used to assign IP

addresses, configure I/O points and I/O unit features, and

inspect, read from, or write to I/O units in real time. For

multiple I/O units that use the same configuration, you can

configure all I/O units simultaneously.

For additional information on the ioProject software suite, see

the ioProject data sheet, Opto 22 form #1473.

Communication Options

You can use any of the following methods—or all of them

simultaneously—to interface with one or more SNAP Ultimate

brains and I/O, using the RJ-45 or RS-232 connections:

• Opto 22 ioControl and ioDisplay—Create and

download control programs with ioControl, and monitor

and control the brain using an operator interface built with

ioDisplay.

• Modbus/TCP driver—for interfacing with any third-party

software or hardware that uses the Modbus/TCP protocol.

• SNMP messaging—for communicating with SNMP-

based enterprise management software such as Computer

Associates’ Unicenter TNG® or Hewlett Packard’s

OpenView®.

•OptoOPCServer—providing OPC 2.0 access for OPC

clients.

• Opto 22’s OptoMMP™ Communications Toolkit—for

writing your own applications. The toolkit includes an

ActiveX® component and a C++ class, which hide the

details of Ethernet communications and the memory map

protocol. Sample utilities with source code are also

provided. For details, see form #1465, the OptoMMP

Protocol Guide.

•Linux

® support—The IEEE 1394-based OptoMMP protocol

is open and documented in the OptoMMP Protocol Guide.

I/O Mounting Racks

SNAP Ultimate brains must be connected to the appropriate

rack to avoid damage to the brain.

The analog/digital/serial SNAP-UP1-ADS connects to standard

SNAP B-series brain mounting racks, which are available with

4, 8, 12, or 16 positions for Opto 22 SNAP I/O modules. Serial

communication, high-density digital, and analog modules can

be placed in any position; 4-channel digital modules can be

placed in any of the first eight positions. (A maximum of eight

serial modules can be used on a rack.) Because of the rack’s

flexibility in handling many types of modules, you can install

the modules that fit your needs.

The digital-only SNAP-UP1-D64 brain connects to a SNAP-

D64RS mounting rack, which can hold up to 16 4-channel

digital input and output modules. Digital functions are

simplified; the following are not included: high-speed and

quadrature counters, pulsing, and TPO (time-proportional

output). Note that high-density digital modules cannot be

used with this brain.

The analog/digital/serial SNAP-UP1-M64 connects to a SNAP-

M64 rack, which lets you use any type of module in any of its

16 positions, subject to the maximum limit of eight serial

modules. Like the SNAP-UP1-ADS brain, the SNAP-UP1-M64

supports all types of modules; like the digital-only brain, it

supports simplified digital functions on all channels.

System Architecture

The SNAP Ultimate controller/brain communicates with other

Ethernet devices running a broad assortment of software

applications. The ioControl strategy in the controller/brain

controls analog, digital, and serial devices through the I/O

modules on its own I/O unit; in addition, it can control other

SNAP Ethernet-based I/O units on the Ethernet network.

SNAP Ultimate Brain

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

SNAP Ultimate Brain DATA SHEET

Form 1291-120917

PAGE

Specifications

All Models

NOTE: To compare specifications and features for the SNAP

Ultimate controller/brain with other Opto 22 hardware, see

the following:

•For I/O processing features, form #1486, the SNAP Ethernet-

Based I/O Processor Comparison Chart

•For controller features, form #1485, the SNAP Controller

Comparison Chart

Power Requirements 5.0 VDC to 5.2 VDC at 1.2 A maximum (does not include module

power requirements)

Processor 32-bit ColdFire 5407

Memory:

Total RAM

Battery-backed RAM

Flash EEPROM

16 MB

512 KB

8 MB

Backup battery CR2032, fixed (not user replaceable)

Network Interface IEEE 802.3 network, 10Base-T and 100Base-TX

Serial Port RS-232

Serial Data Rates Default is 19,200 baud; baud rate is soft-selectable from 150 to

115,200 baud.

Maximum Ethernet

Segment Length 100 meters with Category 5 or superior UTP.

For 100 Mbps at this distance, use Category 5 or superior solid UTP.

Jumpers (Internal) Boot to kernel/boot to loader

Reset to factory defaults

Temperature:

Operating

Storage 0 °C to 70 °C

-40 °C to 85 °C

Humidity 0–95% humidity, non-condensing

SNAP Ultimate Brain

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

SNAP Ultimate Brain

PAGE

DATA SHEET

Form 1291-120917

Specifications (continued)

RS-232 Serial Cable

LED Descriptions

LED Description LED Description

ACT Network Activity RUN Normal Operation

FD Full Duplex Mode 3VF 3 Volt Fault

ERD Ethernet—Receive Data 5VF 5 Volt Fault

ETD Ethernet—Transmit Data FLT Microprocessor Fault

10MB Ethernet Link Detection at 10 Mbps SRD Serial—Receive Data

100MB Ethernet Link Detection at 100 Mbps STD Serial—Transmit Data

Serial Connector Pinouts

Pin RS-232

1TX

2RX

3COM

4RTS

5CTS

SNAP Ultimate Brain

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

SNAP Ultimate Brain DATA SHEET

Form 1291-120917

PAGE

Dimensions

Dimensions are the same for all models of the SNAP Ultimate brain.

More About Opto 22

www.opto22.com • Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-110907

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Products

Opto 22 develops and manufactures reliable, flexible, easy-to-

use hardware and software products for industrial automation,

energy management, remote monitoring, and data

acquisition applications.

OptoEMU Energy Management System

The easy-to-use OptoEMU Sensor monitors electrical energy

use in your facility and delivers detailed, real-time data you

can see and analyze. The Sensor can monitor energy data from

pulsing meters, electrical panels or subpanels, and equipment.

View energy data online using a software service or

incorporate the data into your control system for complete

energy management.

SNAP PAC System

Designed to simplify the typically

complex process of selecting and

applying an automation system, the

SNAP PAC System consists of four

integrated components:

•SNAP PAC controllers

•PAC Project™ Software Suite

•SNAP PAC brains

•SNAP I/O™

SNAP PAC Controllers

Programmable automation controllers (PACs) are

multifunctional, modular controllers based on open standards.

Opto 22 has been manufacturing PACs for over two decades.

The standalone SNAP PAC S-series and the rack-mounted

SNAP PAC R-series both handle a wide range of digital, analog,

and serial functions for data collection, remote monitoring,

process control, and discrete and hybrid manufacturing.

SNAP PACs are based on open Ethernet and Internet Protocol

(IP) standards, so you can build or extend a system easily,

without the expense and limitations of proprietary networks

and protocols.

PAC Project Software Suite

Opto 22’s PAC Project Software Suite provides full-featured,

cost-effective control programming, HMI (human machine

interface) development and runtime, OPC server, and

database connectivity software for your SNAP PAC System.

Control programming includes both easy-to-learn flowcharts

and optional scripting. Commands are in plain English;

variables and I/O point names are fully descriptive.

PAC Project Basic offers control and HMI tools and is free for

download on our website, www.opto22.com. PAC Project

Professional, available for separate purchase, adds

OptoOPCServer, OptoDataLink, options for controller

redundancy or segmented networking, and support for legacy

Opto 22 serial mistic™ I/O units.

SNAP PAC Brains

While SNAP PAC controllers provide central control and data

distribution, SNAP PAC brains provide distributed intelligence

for I/O processing and communications. Brains offer analog,

digital, and serial functions, including thermocouple

linearization; PID loop control; and optional high-speed digital

counting (up to 20 kHz), quadrature counting, TPO, and pulse

generation and measurement.

SNAP I/O

I/O provides the local connection to sensors and equipment.

Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per

module, depending on the type of module and your needs.

Analog, digital, and serial modules are all mixed on the

same mounting rack and controlled by the same processor

(SNAP PAC brain or rack-mounted controller).

Quality

Founded in 1974, Opto 22 has established a

worldwide reputation for high-quality products. All

are made in the U.S.A. at our manufacturing

facility in Temecula, California. Because we do

no statistical testing and each part is tested

twice before leaving our factory, we can

guarantee most solid-state relays and optically

isolated I/O modules for life.

Free Product Support

Opto 22’s California-based Product Support Group offers free,

comprehensive technical support for Opto 22 products. Our

staff of support engineers represents decades of training and

experience. Support is available in English and Spanish by

phone or email, Monday–Friday, 7 a.m. to 5 p.m. PST.

Additional support is always available on our website: how-to

videos, OptoKnowledgeBase, self-training guide,

troubleshooting and user’s guides, and OptoForums.

In addition, hands-on training is available for free at our

Temecula, California headquarters, and you can register online.

Purchasing Opto 22 Products

Opto 22 products are sold directly and through a worldwide

network of distributors, partners, and system integrators. For

more information, contact Opto 22 headquarters at 800-321-

6786 or 951-695-3000, or visit our website at