REVISIONS LTR A DESCRIPTION DATE Part number and source update. Editorial changes throughout. 14 June 2001 APPROVED Robert Heber Prepared in accordance with MIL-STD-100 REV PAGE REV STATUS REV A A A A A A A A OF PAGES PAGE 1 2 3 4 5 6 7 8 PMIC N/A PREPARED BY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 Ron Gary Original date of drawing 10 Aug 1987 CHECKED BY TITLE CONNECTOR, RADIO FREQUENCY, DUMMY STOWAGE, VARIOUS SERIES C. W. Koeller APPROVED BY Richard Marbais SIZE A CAGE CODE 037Z3 REV A 87093 DWG. NO. PAGE AMSC N/A DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. 1 OF 8 5935-E641-02 Inches .015 .06 .230 .240 PIN 87093ZBS 87093ZSP A .99 (25.15) .96 (24.38) B 1.07 (27.18) 1.01 (25.65) mm 0.38 1.52 5.84 6.10 C .510 (12.95) .490 (12.45) Inches .250 .255 .365 .375 D .700 (17.78) .680 (17.27) mm 6.35 6.48 9.27 9.53 E T (thread) Series .125 (3.18) .4375-28-UNEF-2A TK NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Metric equivalents are in parenthesis. FIGURE 1. Dummy stowage, series TK. DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 SIZE A CAGE CODE DWG NO. 87093 037Z3 REV A PAGE 2 PIN 87093TBS 87093TSP A .630 (16.00) .540 (13.70) B .725 (18.42) .625 (15.88) C .504 (12.88) .496 (12.60) D .70 (17.8) .68 (17.3) E T (thread) Series .125 (3.18) .4375-28-UNEF-2A TNC NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Metric equivalents are in parenthesis. FIGURE 2. Dummy stowage, series TNC. DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 SIZE A CAGE CODE DWG NO. 87093 037Z3 REV A PAGE 3 PIN 87093SSP 87093SCG A .340 (8.64) .310 (7.87) B .415 (10.54) .365 (9.27) C .342 (8.69) .338 (8.59) D .510 max (12.95) E T (thread) .102 (2.59) .250-36-UNS-2A Series SMA NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Metric equivalents are in parenthesis. FIGURE 3. Dummy stowage, series SMA. DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 SIZE A CAGE CODE DWG NO. 87093 037Z3 REV A PAGE 4 PIN 87093NBS 87093NSP A .671 (17.04) .641 (16.28) B .756 (19.20) .716 (18.19) C .723 (18.36) .713 (18.11) D 1.00 (25.40) .985 (25.02) E T (thread) .125 (3.18) .625-24-UNEF-2A Series N NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Metric equivalents are in parenthesis. FIGURE 4. Dummy stowage, series N. DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 SIZE A CAGE CODE DWG NO. 87093 037Z3 REV A PAGE 5 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Metric equivalents are in parenthesis. 4. Tolerances shall be .015 unless otherwise specified. PIN 87093ZBS-1 87093ZSP-1 A .865 (21.97) .835 (21.21) B .960 (24.38) .910 (23.11) C .720 (18.29) .714 (18.14) D 1.00 (25.40) .985 (25.02) E T (thread) Series .125 (3.18) .6875-24-UNEF-2A SC FIGURE 5. Dummy stowage, series SC. DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 SIZE A CAGE CODE DWG NO. 87093 037Z3 REV A PAGE 6 ENGINEERING DATA: Temperature rating: -65C to +260C. REQUIREMENTS: Dimensions and configurations: See figures 1 through 5. Insulation resistance: Not applicable. Corrosion (salt Spray): Method 101, test condition B, MIL-STD-202. The salt solution concentration shall be 5 percent. Special detail: After exposure, hardware shall be washed, shaken, and lightly brushed, as specified in method 101 of MIL-STD-202, and then permitted to dry for 24 hours at 40C. Hardware shall then be examined for evidence of corrosion and pitting and ease of coupling. Part or Identifying Number (PIN): See table I. Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI. DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 SIZE A CAGE CODE DWG NO. 87093 037Z3 REV A PAGE 7 TABLE I. PIN's DSCC drawing PIN 1/ 87093ZBS 87093ZSP 87093TBS 87093TSP 87093SSP 87093SCG 87093NBS 87093NSP 87093ZBS-1 87093ZSP-1 Vendor CAGE number 00795 Vendor reference PIN 7163000A090-002 7163000K090-001 1263000A090-000 1263000K090-001 1363000K050-002 1363000G050-001 1163000A330-000 1163000K330-002 1963000A330-001 1963000K330-002 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vender CAGE number 00795 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 Vendor name and address Delta Electronics 416 Cabot Street Beverly, MA 01915 SIZE A CAGE CODE DWG NO. 87093 037Z3 REV A PAGE 8