Crimp-Validation product: DELPHI PN 13553177 material: surface: material thickness: CUNI3SI1MG AU 0,25 mm cross section [mm]: 0,22 + 0,35 strip length: 4,50 mm cable type: insulation o [mm]: FLRY-A seal: conductor dimension cable arr. cable type cross sect. [mm] struct. nxd [mm] top FLRY-A 0,22 + 0,35 7 x 0,21 + 7 x 0,26 crimp dimension [mm] tear-out core insulation force height width height width [N] 0,05 0,10 0,10 0,10 30 1,25 1,70 2,60 2,10 core: C-1.60-3.0-10 DPN 10713736 insulation: IS-2.00-3.0-12-A DPN 10882043 anvil: two piece anvil: AC-1.60-3.25 DPN 10764051 AI-2.00-3.2-0.4-A DPN 10882044 The tear-out force is validated for the small cable. Notice to cable arrangement: side: cables side by side top: one cable on top of the other n. d.: not defined Date: Date Rev.: 24.02.2005 23.02.2006 Rev.-No.: 01 Record-No. 7068 page 1 / 2 Approved by: DELPHI WUPPERTAL / PETP / HERMANN Owner: DELPHI GERMANY Crimp-Validation DELPHI PN 13553177 cable: 0,22 mm + 0,35 mm = 7 x 0,21 mm + 7 x 0,26 mm crimp height: 1,25 mm crimp width: 1,70 mm Date: Date Rev.: 24.02.2005 23.02.2006 Rev.-No.: 01 Record-No. 7068 page 2 / 2 Approved by: DELPHI WUPPERTAL / PETP / HERMANN Owner: DELPHI GERMANY