Aluminum Can Power Film Capacitors C44P/C20A, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter Overview Applications The C44P/C20A series is a polypropylene metallized film capacitor with a cylindrical, aluminium can-type design filled with oil. It uses screw terminals, plastic insulator, and an overpressure safety device. Typical applications include commutation, power factor correction, and AC harmonic filtering. Benefits * Overpressure safety device * High peak current capability * High torque screw terminals with plastic insulator * Long lifetime *Self-healing Part Number System C 44 Series MKP Capacitors for Power Applications P L G R Application Rated Voltage (VAC) Case Type Terminal Style G= M12 bolt R= Male M10 44 = 330 - AC Filter 440 VAC P = C44 20 = 550 - A = C20 1,000 VAC For C44P: L = 330 K = 440 For C20A: K = 550 L = 640 Q = 780 Z = 1,000 6 1 0 0 A Internal Code Capacitance Code (pF) Digits nine, ten, and eleven indicate the first three digits of capacitance value. Digit 8 indicates the number of zeros to be added. A= Standard Z= Special A S Internal Codes J Tolerance J = 5% K = 10% It is not possible to manufacture every part number which could be created from coding description. Please refer to table of standard part numbers and ask KEMET for other possibilities. One world. One KEMET (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3050_C44P_RADIAL * 3/29/2019 1 Power and AC Film Capacitors - Aluminum Can Power Film Capacitors C44P/C20A, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter Dimensions - Millimeters (O+4)1 P1 O201 W11 M10 W1 H2 H1 M1 O0.5 Diameter P W W1 M1 H1 O = 65 28 18 40 12 16 O 75 35 21 45 12 16 All dimensions are in mm Maximum Driving Torque Terminals M10 10 [N*m] Bolt M12 12 [N*m] (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3050_C44P_RADIAL * 3/29/2019 2 Power and AC Film Capacitors - Aluminum Can Power Film Capacitors C44P/C20A, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter General Technical Data Reference Standards Dielectric Climatic Category Maximum hot spot temperature Endurance Test IEC 61071 Installation IEC 61071 UL810 approved Polypropylene film Non-inductive type winding 25/70/56 - IEC 60068-1 +80C +70C at Case Temperature Whatever position Tinned brass deck with self estinguish UL94 V0 plastic insulators Electrical Characteristics Rated Voltage Urms = (see table) VAC Surge Voltage Us = (see table) VDC Capacitance Tolerance Dissipation Factor PP typical (tg0) Relative Humidity Capacitance deviation in temperature range (-40 +50C) 5% or 10% 0.0002 at 25C Annual average 80% at 24C On 30 days/year permanently 100%. On other days occasionally 90%. Dewing not admitted 1.5% maximum on capacitance value at 20C Life Expectancy Life Expectancy Capacitance drop at end of life Failure Rate IEC 61709 100,000 hours at VRMS with THS 75C -5% (typical) See FIT Graph Test Methods Test voltage term to term (Utt) 1.5 x VRMS for 10 seconds at 25C Test voltage term to case (Utc) 3,600 V ~ 50 Hz for 10 seconds (C44P) 6,000 V ~ 50 Hz for 10 seconds (C20A) Damp Heat IEC 60068-2-78 Change of Temperature IEC 60068-2-14 Vibration Strength IEC 60068-2-6 NOTICE: Care should be taken to ensure that there still is electrical clearance of 15 mm between terminations and other live or earthed parts above the capacitor, in case of safety device activation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3050_C44P_RADIAL * 3/29/2019 3 Power and AC Film Capacitors - Aluminum Can Power Film Capacitors C44P/C20A, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter Table 1 - Ratings & Part Number Reference Cap Value (F) 1 Vrms Rated Voltage Surge Voltage Maximum Dimensions (mm) Ripple Current ESR 10 kHz (m) (nH) (C/W) ESL Thermal Res dV/dt (V/s) Part Number VAC VDC VDC D H 10 kHz 40C (A)1 100 200 300 300 400 500 500 600 600 100 100 120 133 133 150 200 250 300 400 22 33 47 68 100 120 150 15 22 33 47 68 100 120 150 10 15 22 33 47 68 100 15 20 22 33 47 68 330 330 330 330 330 330 330 330 330 440 440 440 440 440 440 440 440 440 440 550 550 550 550 550 550 550 640 640 640 640 640 640 640 640 780 780 780 780 780 780 780 1,000 1,000 1,000 1,000 1,000 1,000 700 700 700 700 700 700 700 700 700 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,280 1,280 1,280 1,280 1,280 1,280 1,280 1,400 1,400 1,400 1,400 1,400 1,400 1,400 1,400 1,700 1,700 1,700 1,700 1,700 1,700 1,700 2,300 2,300 2,300 2,300 2,300 2,300 1,050 1,050 1,050 1,050 1,050 1,050 1,050 1,050 1,050 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,900 1,900 1,900 1,900 1,900 1,900 1,900 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,100 2,500 2,500 2,500 2,500 2,500 2,500 2,500 3,300 3,300 3,300 3,300 3,300 3,300 65 65 65 75 65 75 85 85 85 75 65 65 65 75 65 75 85 85 95 65 75 65 65 75 85 95 65 65 75 65 75 95 95 116 65 75 75 85 75 85 95 75 75 75 75 85 95 117 147 247 197 247 247 197 247 280 147 197 197 247 197 247 247 247 247 247 117 117 197 247 247 247 247 117 147 147 247 247 247 247 247 117 147 147 147 247 247 247 147 140 147 247 247 247 25 43 50 55 55 58 63 65 75 30 50 50 40 50 45 55 60 60 65 40 45 50 55 60 60 60 35 35 40 55 60 60 60 60 30 35 40 50 55 60 60 33 40 35 40 45 55 3.0 2.8 2.3 1.4 2.0 1.8 1.2 1.6 1.1 3.5 2.3 1.8 3.0 1.6 2.8 2.4 2.0 1.9 1.7 2.1 1.6 1.4 1.7 1.4 1.3 1.2 2.5 3.0 2.2 1.9 1.6 1.3 1.3 1.2 3.0 3.6 2.7 2.0 1.8 1.5 1.3 2.5 2.1 2.0 1.7 1.4 1.2 115 140 150 160 160 170 160 180 210 145 135 165 155 170 160 175 175 180 200 125 130 135 145 160 165 180 120 125 135 145 160 170 175 180 130 135 140 150 160 170 180 150 150 155 165 170 180 8.5 5.4 3.6 4.2 3.1 2.9 3.4 2.9 2.4 5.6 4.4 4.2 3.7 4.0 3.5 3.2 3.4 2.7 2.5 13.3 10.6 7.8 6.2 5.2 4.6 4.4 14.1 10.9 9.1 6.3 5.3 4.4 4.1 3.8 14.1 10.1 8.9 7.6 5.2 4.5 4.0 9.2 8.3 8.0 5.3 4.7 4.1 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 20 20 20 20 20 20 20 20 20 20 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 70 70 70 70 70 70 70 85 85 85 85 85 85 C44PLGR6100AASJ C44PLGR6200ZASJ C44PLGR6300ZASJ C44PLGR6300AASJ C44PLGR6400ZASJ C44PLGR6500ZASJ C44PLGR6500ZBSJ C44PLGR6600AASJ C44PLGR6600ZASJ C44PKGR6100AASJ C44PKGR6100ZASJ C44PKGR6120AASJ C44PKGR6133AASJ C44PKGR6133ZASJ C44PKGR6150AASJ C44PKGR6200AASJ C44PKGR6250AASJ C44PKGR6300AASJ C44PKGR6400AASK C20AKGR5220AASK C20AKGR5330AASK C20AKGR5470AASK C20AKGR5680AASK C20AKGR6100AASK C20AKGR6120AASK C20AKGR6150AASK C20ALGR5150AASK C20ALGR5220AASK C20ALGR5330AASK C20ALGR5470AASK C20ALGR5680AASK C20ALGR6100AASK C20ALGR6120AASK C20ALGR6150AASK C20AQGR5100AASK C20AQGR5150AASK C20AQGR5220AASK C20AQGR5330AASK C20AQGR5470AASK C20AQGR5680AASK C20AQGR6100AASK C20AZGR5150AASK C20AZGR5200ZBSK C20AZGR5220AASK C20AZGR5330AASK C20AZGR5470AASK C20AZGR5680AASK Cap Value VAC Rated Voltage Surge Voltage D H Ripple Current ESR ESL Thermal Res dV/dt (V/s) Part Number Maximum admissible RMS current THS 75C. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3050_C44P_RADIAL * 3/29/2019 4 Power and AC Film Capacitors - Aluminum Can Power Film Capacitors C44P/C20A, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter Lifetime Expectancy/Failure Quota Graphs Hot Spot Temperature [C] Lifetime curve C44P-C20 series Voltage Ratio V/VRMS 1.40 1.30 60C 1.20 70C 1.10 1.00 Power Losses and Hot Spot Temperature Calculation At each frequency, the Power Losses are the sum of: 1. Dielectric Power Losses PD(fi) = 2 * * fi* C * V(fi)2* tg0 which can be alternatively calculated as PD(fi) = 75C 0.90 0.80 80C 0.70 0.60 100 1,000 10,000 100,000 I(fi)2 2 * * fi* C * tg0 where: tg0 = 2 * 10-4 2. Joule Power Losses: PJ(fi) = Rs * I(fi)2 1,000,000 Lifetime Expectancy [h] The Total Power Losses are the sum of the components at each frequency: PT = [PD ( f i ) + PJ ( f i )] i The Thermal Jump in the Hot Spot is: THS = PT * Rth-hs V = Operating Voltage [VAC] Vrms = Rated Voltage [VAC] The Hot Spot Temperature is: THS = Ta + THS FIT at Hot Spot Temperatures 80 75 70 60 Hot Spot Temperature C 1,000 Limits for the formulas The limits listed below should not be exceeded: 1. V( f ) 2 VRMS I( f ) 2 I RMS i 2. 100 FIT i i THS =Ta + THS (THS )MAX 10 1 i 0.6 0.7 0.8 0.9 1 Voltage Ratio V/Vrms Example of calculation Part Number: C44PKGR6100AASJ Rated VRMS = 440 [VRMS] Rated IRMS = 30 [A] Rs = 3.5 [m] Rth = 5.6 [C/W] Fundamental Frequency F1 = 50 [Hz] Ripple Frequency F2 = 7000 [Hz] Fundamental Voltage V1 = 440 [V~] Ripple Current I2 = 27 [A] Ta = 35C I1 = I(50) = 2 * * 50 * 100 * 10-6 * 440 = 13.8 [A] V2 = V(7000) = [27/(2 * * 7000 * 100 * 10-6)] = 6.14 [V] 1.1 Where Ta is the ambient temperature (steady state temperature of the cooling air flowing around the capacitor, measured at 100 mm of distance from the capacitor and at a height of 2/3 height of the capacitor). 3. Maximum case temperature (TCASE) 70C IRMS = (13.82 + 27 2) = 30 30 Admitted VRMS = (4402 + 6.12) = 440 440 Admitted PD(50) = 2 * * 50 * 100 * 10-6 * 4402 * 2 * 10-4 = 1.22 [W] PD(7000) = [272/(2 * * 7000 * 100 * 10-6)] * 2 * 10-4 = 0.03 [W] PJ(50) = 3.5 * 10-3 * [(2 * * 50 * 100 * 10-6 * 440)2] = 0.67 [W] PJ(7000) = 3.5 * 10-3 * 27 2 = 2.55 [W] PT = 1.22 + 0.03 + 0.67 + 2.55 = 4.47 [W] THS = 5.6 * 4.47 = 25 [C] THS = Ta + THS THS = 35 + 25 = 60 [C] OK since hot spot temperature is less than maximum admitted Expected Life at THS = 75C 100,000 hours (see lifetime curve) Expected Life at THS = 60C 140,000 hours (see lifetime curve) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3050_C44P_RADIAL * 3/29/2019 5 Power and AC Film Capacitors - Aluminum Can Power Film Capacitors C44P/C20A, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter Marking KEMET C20AZGR5200ZBSK 20F 10% Urms=1000V~ lrms=50A 50/60Hz -25/70/56 PROTECTED 1000AFC SH NO PCBs (R) B4 11374275 Manufacturer Logo Part Number Rated Capacitance and Tolerance. Rated Voltage Rated Current and Frequencies Climatic Category UL Approvals Self-Healing Dielectric. UL Logo. Production Date and Batch Number. Environmental Compliance As a leading global supplier of electronic components and an environmentally conscious company, KEMET continually aspires to improve the environmental effects of our manufacturing processes and our finished electronic components. In Europe (RoHS Directive) and in some other geographical areas such as China (China RoHS), legislation has been enacted to prevent or otherwise limit the use of certain hazardous materials, including lead (Pb), in electronic equipment. KEMET monitors legislation globally to ensure compliance and endeavors to adjust our manufacturing processes and/or electronic components as may be required by applicable law. For military, medical, automotive, and some commercial applications, the use of lead (Pb) in the termination is necessary and/or required by design. KEMET is committed to communicating RoHS compliance to our customers. Information related to RoHS compliance will be provided in data sheets and using specific identifiers on the packaging labels. All KEMET power film capacitors are RoHS compliant. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3050_C44P_RADIAL * 3/29/2019 6 Power and AC Film Capacitors - Aluminum Can Power Film Capacitors C44P/C20A, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter Materials & Environment The selection of raw materials that KEMET uses for the production of its electronic components is the result of extensive experience. KEMET directs specific attention toward environmental protection. KEMET selects its suppliers according to ISO 9001 standards and performs statistical analyses on raw materials before acceptance for use in manufacturing our electronic components. All materials are, to the best of KEMET's knowledge, non-toxic and free from cadmium; mercury; chrome and compounds; polychlorine triphenyl (PCB); bromide and chlorinedioxins bromurate clorurate; CFC and HCFC; and asbestos. Dissipation Factor Dissipation factor is a complex function involved with capacitor inefficiency. The tg may vary up and down with increased temperature. For more information, refer to Performance Characteristics. Sealing Hermetically Sealed Capacitors As the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a breach in the capacitor. Such a breach can result in leakage, impregnation, filling fluid, or moisture susceptibility. Barometric Pressure The altitude at which hermetically sealed capacitors are operated controls the capacitor's voltage rating. As the barometric pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due to pressure changes. These effects can be in the form of capacitance changes, dielectric arc-over, and/or low insulation resistance. Altitude can also affect heat transfer. Heat that is generated in an operation cannot be dissipated properly, and high RI2 losses and eventual failure can result. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3050_C44P_RADIAL * 3/29/2019 7 Power and AC Film Capacitors - Aluminum Can Power Film Capacitors C44P/C20A, 330 - 1,000 VAC/700 - 2,300 VDC, for PFC & AC Filter KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3050_C44P_RADIAL * 3/29/2019 8