LED Lamps LEDPanel Panel Lamps LED Panel Lamps lighting the way Oxley Developments Company Ltd Priory Park Ulverston Cumbria LA12 9QG United Kingdom t: +44 (0) 1229 483226 f: +44 (0) 1229 581851 e: sales@oxleygroup.com Oxley Inc 31 Business Park Drive Branford CT 06405 USA t: +1 (203) 488 1033 f: +1 (203) 481 6971 e: info@oxleygroup.com ODC:SM:40813/2 Table of Contents Introduction LED Panel Indication / Filament Replacements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ingress Protection Chart (IP Rating) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Integral Resistor / Lens Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Secure XIR Lighting (NVG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Selection Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Panel Lamps 5mm Mounting Sub Miniature Cone Lock MI/5 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6.35mm Mounting Low Profile/Prominent Lens OXL/CLH/63 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 6.35mm Mounting Low Profile/Prominent Lens AC Voltage OXL/CLH/63 AC Series. . . . . . . . . . . . . . . . . . . . . . . 10 8mm Mounting Cone Bezel/Prominent Lens OXL/CLH/80 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 8mm Mounting Cone Bezel/Prominent Lens AC Voltage OXL/CLH/80 AC Series. . . . . . . . . . . . . . . . . . . . . . . . . 14 10mm Mounting Low Profile/Prominent Lens OXL/CLH/100 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 10mm Mounting Low Profile/Prominent Lens AC Voltage OXL/CLH/100 AC Series. . . . . . . . . . . . . . . . . . . . . . . 18 10mm Mounting Low Profile/Prominent Lens Bi or Tri Colour 2&3OXL/CLH/100 . . . . . . . . . . . . . . . . . . . . . . . . . 20 High Performance Panel Lamps 5mm Mounting Sub Miniature OXL/MIL50 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5mm Mounting Sub Miniature AC Voltage OXL/MIL50 AC Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5mm Mounting Sub Miniature Sunlight Viewable and NVG Options OXL/MIL50 Series. . . . . . . . . . . . . . . . . . . . . 26 8mm Mounting Panel Sealed PS/LH/8 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 8mm Mounting Panel Sealed Separate Body and LED PS/LH/8 2 Part Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 8mm Mounting Panel Sealed Sunlight Viewable and NVG Options PS/LH/8 Series . . . . . . . . . . . . . . . . . . . . . . . 32 8mm Mounting Sealed top and rear STR/LH/8 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 8mm Mounting Sealed top and rear AC Voltage STR/LH/8 AC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 8mm Mounting Sealed top and rear Sunlight Viewable and NVG Options STR/LH/8 Series. . . . . . . . . . . . . . . . . 38 8mm Mounting Sealed top and rear Bi or Tri Colour 2&3STR/LH/8 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 10mm Mounting Sealed top and rear Domed Lens STR/LH23/10 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 10mm Mounting Sealed top and rear Bi or Tri Segmented Colours 2 & 3STR/LH23/10 Series. . . . . . . . . . . . . . . 44 10mm Mounting Sealed top and rear Domed or Convex lens STR/LH/10 Series. . . . . . . . . . . . . . . . . . . . . . . . . 46 8mm Rear Mounting Sunlight Viewable and NVG Options STR5/LH/8 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 8mm Rear Mounting Sunlight Viewable and NVG Options STR501/LH/8 Series. . . . . . . . . . . . . . . . . . . . . . . . . . 50 8mm Mounting DESC 85122 Approved Indicator Lamps DESC 85122 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 8mm Mounting DESC 87019 Approved Indicator Lamps DESC 87019 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . 54 8mm Mounting Neon Indicator AC Voltage STR/NLH Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Filament Replacement LEDs T1 Bulb Replacements ELED/682 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 T 1 3/4 Bulb Replacements ELED/1750/DMC Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Telephone Slide Base Bulb Replacements ELED/T5.5 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Bayonet Bulb Replacements ELED/BA9s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 LED Panel Indication Oxley Light Emitting Diode (LED) indicator lamps combine the latest in LED technology with Oxley mechanical and optical expertise to provide a wide range of panel mounting indicator lamps for both benign and hazardous environments. With the exciting advances in LED technology and the continuation of existing panel mounting lamp ranges, many options are available including wide angle and focused viewing; sunlight readability and Night Vision Goggle Compatibility (NVG). With Oxley's knowledge and experience within the field of opto-electronics we can address high reliability applications, LEDs are electrically screened ensuring typical Mean Time Between Failure (MTBF) ranging from 90,000 hours to in excess of 200,000 hours. Oxley has a variety of LED indicator lamps available which have various sealing specifications ranging from IP66 to IP68, with low current versions also available. All variants have optional flame retardant flying lead terminations which can be colour coded to suit customers special requirements. Traditionally designed for the most demanding of applications both military and non-military, many devices are approved by the UK MoD and US DoD and hold allocated NATO Stock Numbers. An extensive range of products suitable for commercial and industrial applications is also available with mounting hole diameters ranging from 5 mm to 12.7mm and with many other options and features available, LED panel indicators suitable for any applications can be provided. LED Bulb Replacement With the increasing brightness of LED technology, Oxley has introduced a wide range of filament replacement LED lamps. Both uni-polar and bi-polar options are available which operate from either AC or DC voltages. This product range is ideal for fit-and-forget use in professional illuminated pushbutton switches and annunicators. Available in either T1 or T13/4 as standard, telephone slide base, BA9 is also available on request with operating voltage ranges from 5 V to 440 V DC/AC dependant on the product type. Options include a choice of six high intensity colours (red, orange, yellow, green, blue and white). Panel Lamp Sealing Various sealing options, denoted by IP ratings, are available for the different styles of lamps. IP Ratings The IP rating system provides a means of classifying the degrees of protection from dust, water and impact afforded by electrical equipment and enclosure. The system is recognised in most European countries and set out in BS EN 60529:1992 Degrees of protection provided by enclosures (IP code). Note: All LED indicator lamps range from IP66 to IP68 First Number = Protection against solid objects IP TESTS 0 = No protection 1 Protected against solid objects up to 50 mm, e.g. accidental touch by hand. 4 Protected against solid objects over 1 mm (tools, wires and small wires) 2 Protected against solid objects up to 12 mm, e.g. fingers. 5 Protected against dust - limited ingress (no harmful deposit) 3 Protected against solid objects over 2.5 mm (tools and wires) 6 Totally protected against dust 1 Second Number = Protection against LIQUID INGRESS IP TESTS 0 = No protection 1Protected against vertically falling drops of water (e.g. condensation). 5 Protected against low pressure jets of water from all directions - limited ingress permitted. 2 Protected against direct sprays of water up to 15 from the vertical. 6 Protected against strong jets of water, e.g. for use on ships decks - limited ingress permitted 3 Protected against direct sprays of water up to 60 from the vertical. 7 Protected against the effects of temporary immersion between 15cm and 1m. Duration of test 30 minutes. 4 Protected against water sprayed from all directions - limited ingress permitted. 8 Protected against long periods of immersion under pressure. Integral Resistor The option of integral resistor eliminates the need for a current limiting resistor and therefore simplifies the external drive circuitry. Indicator lamps incorporating a current limiting resistor are identified by a colour coded sleeve on the cathode terminal. The table below displays the standard supply voltage indicator lamps available with colour codes used to identify the supply voltage. Supply voltage (Vdc) Colour Code of Sleeve 5 Blue 12 Yellow 15 Green 24 Brown 28 Violet 110 Blue/Black 240 Black/Black The integral resistor limits the supply current to approximately 12 mA -15 mA at the specified supply voltage as standard. Integral resistors for different supply voltages and currents are available, but may be limited by the space inside the indicator lamp body to dissipate the power generated. (Please contact us for further details). The majority of our indicator lamps are fitted with integral blocking diodes electrically connected in series with the LED. The blocking diode prevents the LED from being damaged through inadvertent connection to a reverse polarity supply. In addition to providing protection from reverse polarity connection the diode also provides halfwave rectification, which allows the lamp to be operated from AC supplies, providing the supply frequency is above 50 Hz to eliminate flicker. Lens Characteristics PLANO-CONVEX Rear surface of lens flat - `plano' - diffused and front of lens convex. Focal length of lens designed to increase the `virtual image' of the light source, this in combination with the diffusion on the rear of lens increases the area of the light source and provides even illumination across the viewing aperture. FRESNEL Flat or convex lens with a series of concentric rings (grooves) cut into the rear surface of the lens. This provides the best of both worlds by attaining maximum on-axis brightness from the light source, viewed through clear portions of the lens, in between the concentric grooves and increasing the viewing angle of the indicator lamp by diffusing and refracting the light from the light source in the concentric rings. Due to the relatively small size and complexity of fresnel lenses used in Oxley indicator lamps these lenses are plastic injection moulded, in a variety of colours including clear to match the colour of the light source and the application. 2 DOMED Domed lens. This lens provides 130 omni-directional viewing characteristics. Ideal for applications requiring wide angle visibility in all ambient light conditions where a high level of performance is required. FLAT - CLEAR Used in applications where the indicator lamp is to be viewed under low ambient light conditions. DIFFUSED Light projected on to the rear diffused surface of the lens is scattered, improving the viewing angle and increasing the area of the viewed light source. Increases readability of indicator lamps under higher ambient light conditions; however, readability under sunlight conditions is compromised and improves the aesthetic appearance of the lamp, since the diffused surface on the rear of the lens provides a screen preventing direct viewing of the light source. EMI Shielding A special electrostatic screen is connected both electrically and mechanically between the light source and the lens. Shielding efficiency - 20 dB reduction in electromagnetic radiation over the frequency range 5 MHz to 1GHz when compared against a nonshielded device. Sunlight Readable A filter with light attenuating properties that is used to increase the `ON/OFF' contrast ratio of the indicator lamp, therefore achieving greater sunlight readability. Eliminating reflections and increasing the contrast ratio play the major part in achieving better sunlight readability. The specially designed filters used in Oxley indicator lamps attenuate the ambient light reflected off the lens. Any reflected light from the inner surfaces of the indicator lamp that may cause spurious ON/OFF indications is also attenuated, which produces the `black hole' effect where reflected light is effectively quenched, thereby increasing the sunlight readability by increasing the contrast ratio. This explains how a lamp with a lower luminous intensity can have better sunlight readability than a lamp with a higher luminous intensity. ANTI-REFLECTION COATING An interference coating applied to a flat surface of a filter or lens which reduces the reflectance of that surface over the visible spectrum, further enhancing the sunlight readability of the indicator lamp. LENS MATERIAL Material from which the lens is manufactured. GLASS - Used on the majority of Oxley indicator lamps due to precise control of optical properties and mechanical robustness. It also offers excellent resistance to temperature, thermal shock and solvents. POLYCARBONATE - Used for mechanically complex lenses, e.g. fresnel, that require injection moulding due to the complexity of the opto-mechanical design. Terminals PINS or SPILLS Indicates lamp terminals. TAGS Generally more robust terminations featuring pins for insertion into PCBs, wire wraps or eyelets for ease of connecting hook-up wires. FLYING LEADS Available with colour coded wire for indication of polarity and different grades of wire, e.g. flame retardant, MIL-Spec, halogen free etc. Incorporation of flying lead option generally indicated by addition of `FLxx' into the part No., where `xx' indicates the length of the flying lead in centimetres. FLYING LEADS WITH CONNECTORS For ease of assembly and reduced solder joints. Secure XIR Lighting - Night Vision Goggle Compatible Used to describe an indicator lamp designed to meet the parameters specified by DESC control drawing No. 87019. The main purpose of DESC 87019 is to define secure lighting of equipment that is 3 going into `front-line' combat operations where standard indicator lamps could give away the position of the equipment and personnel to enemy forces. Secure lighting is achieved by meeting two main parameters: 1.Restricting the viewing angle of visible light emitted from the indicator lamp. e.g. the operator must be standing directly in front of the equipment to see the light source. 2.Restricting the amount of energy emitted from the indicator lamp in the near infrared (NIR) region in the bandwidth of approximately 600 to 930nm. This is to eliminate detection by enemy forces using night vision goggles (NVGs). NVG Is the nomenclature used to describe an indicator lamp that is Night Vision Goggle compatible. For an indicator to be NVG compatible the amount of energy emitted in the near infrared (NIR) region must be restricted as described above for the XIR indicator lamps; however, unlike the XIR lamps there is no restriction on the viewing angle of the indicator lamp. Night vision goggles produce an image by amplifying light in the NIR region of the spectrum. The NVGs have an Automatic Gain Control (AGC) which controls the amplification of the NIR. As NIR levels illuminating a scene increase, to maintain the contrast of the image being presented to the user, the AGC reduces the level of amplification. As NIR levels reduce the AGC increases the amplification to maintain the image. The effect of stray high intensity NIR (for example, unfiltered light from an indicator lamp on a control panel close to the user of NVGs) is for the amplification of the NVGs to be reduced thereby blinding the goggles to all but the strong light source. This is particularly critical for aerospace cockpit applications. The restriction of the NIR spectrum is achieved by vacuum deposition of special materials with differing refractive indices on to the rear surface of the filter. To form the NIR blocking filter, many alternate layers of these materials are vacuum deposited onto the lens. DESC 85122 APPROVED Indicates styles of indicator lamps which can be approved against DESC control drawing 85122. Indicator lamps approved against DESC 85122 are 100% screened against the following test schedule: High Temperature Storage - at 100C, duration 72 hours minimum. Thermal Shock: * high = 100C * low = -55C 10 cycles duration at each temperature, 15 minutes minimum. Constant Acceleration: 20,000 g. Seal test: immersion per MIL- STD-750, test method 1011 condition A. Pre Burn-in Measurements: * Luminous Intensity (Iv) * Forward Voltage (Vf) * Reverse Current (Ir) * Burn-In - (Forward bias) at ambient temperature. 168 hours minimum duration. * Post Burn-in Measurements: * lv (A Iv, 20% max. from initial value). * Vf (A Vf 50 mV from initial value). * Ir Insulation Resistance >1,000 M at 500 V between both of the terminations and body. Mechanical Inspection - Additional maintenance testing is carried out against sampling plan to ensure compliance with the specification. DESC 87019 APPROVED Indicates styles of indicator lamps which can be approved against DESC control drawing 87019. Testing generally as specified for DESC 85122 with the addition of total power emission measurements between 350 nm and 930 nm. DESC -GENERAL Only indicator lamps that are specified on the DESC control drawing can be formally released against the drawing. However other styles of indicator lamps can be certified as meeting the screening and general requirements of the DESC drawing. (Please contact us for further sdetails). 4 ELED/BA9 Bayonet Series ELED/T5.5 Telephone Slide Base Series ELED/1750 T13/4 Series ELED/682 T1 Series STR/NLH Series DESC Approved STR501 Series STR5 Series STR/LH/10 Series STR/LH23/10 Series STR/LH/8 Series PS/LH/8 Series OXL/MIL50 Series 8 OXL/CLH/100 Series OXL/CLH/63 Series 6 OXL/CLH/80 Series MI/5's Series Page Number 12 16 22 28 34 42 46 48 50 52 56 58 60 62 64 Bulb Replacements DESC 87019 Approved DESC 85122 Approved Plastic Body Aluminum Chromate Finish Black Anodised Finish Flying Leads Tags Spill Terminations Prominent Lens Flat Lens Domed Lens Cone Bezel Convex Lens Low Profile NVG Compatible Sunlight Viewable Bi or Tri Colour Rear Mounting Voltage Options Neon LED IP Seal Rating 67 66 66 66 67 68 68 68 68 68 68 68 68 66 66 66 66 Mouting Hole Dia (mm) 5.0 6.35 8.0 10.0 5.0 8.0 8.0 10.0 10.0 8.0 8.0 8.0 8.0 N/A N/A N/A N/A 5 MI/5 Series Sub-Miniature Cone Lock Indicator Lamp [Key Characteristics Functional * 5mm mounting * Fast, easy push fit mounting * 80 viewing angle Adaptable * Low profile * Customer specials on request Resilient * Self-sealing indicator sealed to IP66 * -40 to 85C operating and storage temp [Specifications COLOURS Luminous Intensity Std mcd 1 1.5 1000 High Intensity 1000 1200 1200 1250 White Red Yellow Green x x P x x P x P x x x P x x x x x x P x P x x x x x x x x P x x P x x [Ordering Information MI/5/ Colours RD - Red GN - Green YW - Yellow Voltage Blue Current (mA) Forward 2.1 Reverse 5 20 2.1 5 20 2.1 5 20 3.6 5 20 3.6 5 20 1.9 5 20 3.6 5 20 Terminations Blank - Spills FLXX - Flying Leads (XX=length in cm) / ALGaAsRD - High Intensity Red H/GN - High Intensity Green H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White Example: MI/5/H/GN - Spills, High Intensity Green Example: MI/5/FL30/YW - Flying Leads 30cm, Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 6 PANEL LAMPS MI/5 Series ALL DIMENSIONS IN MM [Technical Information Terminations Spills or Flying Leads Body Acetal Bush High Dispersion Grade PTFE (White Standard) Encapsulant Silicone Resin Chassis Thickness 1.6mm (0.062") - 3.2mm (0.125") Mounting Hole 5.0mm 0.05 Mean Time Before Failure 90,000 hours [Termination Options Flying Leads Spills Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 7 PANEL LAMPS ODC:SM:40748/1 OXL/CLH/63 Series Low Profile or Prominent with Flush Mounting [Key Characteristics Functional * 6.35mm mounting * Space critical applications * 80 viewing angle Adaptable * Full colour range with lens options * Voltage and current options * Customer specials on request Resilient * IP66 sealed * -40 to 85C operating and storage temp * Corrosion resistant [Specifications COLOURS White Red STD 35 45 x x P P P P P P High Intensity Luminous Intensity 750 900 940 1000 1000 1200 1250 1250 P x x P x x x x x P x x x x P x P x x x P x x x x x P x x x x P mcd Yellow Green [Ordering Information Lens Blank - Fresnel Lens P - Prominent Lens OXL/CLH/63/ Finish Blank - Aluminium BB - Black Anodised Voltage Blue Forward Reverse x x 5,12,24,28 2.2 5,12,24,28 5 15 20 x P x x x P x x 5,12,24,28 5,12,24,28 5,12,24,28 2.2 3.6 3.6 1.9 3.6 5,12,24,28 5,12,24,28 5,12,24,28 5 5 5 5 5 15 15 15 20 20 20 20 20 Lens Colour Blank - Coloured Lens CL - Clear Lens / Voltage Blank 5 12 24 28 Current (mA) / <5VDC (current driven) 5VDC 12VDC 24VDC 28VDC Terminations Blank - Spills FLXX - Flying Leads / / Colours RD - Red GN - Green YW - Yellow / ALGaAsRD - High Intensity Red H/GN - High Intensity Green H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White Example: OXL/CLH/63/RD - Aluminium Finish, Fresnel Lens, 2.2v, Coloured Lens, Spills, Standard Intensity Red Example: OXL/CLH/63/BB/P/12/CL/FL20/H/BE - Black Anodised, Prominent Lens, Clear Lens, 12v, Flying Lead 20cm, High Intensity Blue Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 8 PANEL LAMPS OXL/CLH/63 Series ALL DIMENSIONS IN MM [Technical Information Terminations Flying Leads Copper wire PVDF Insulation Body Aluminium Alloy, Clear (Black Anodised Option) Lens Colour Polycarbonate (Clear Lens Optional) Nut Nickel Plated Brass Washer Spring Steel, Bright Zinc Plated Chassis Thickness 1.5mm (0.059") - 5mm (0.197") Mounting Hole 6.35mm + 0.2 Recommended Mounting Torque 1Nm (0.74lbft) Mean Time Before Failure 90,000 hours [Termination Options Flying Leads Spills [Lens Options Low Profile Prominent Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 9 PANEL LAMPS ODC:SM:40741/2 OXL/CLH/63/AC Series Low Profile or Prominent with Flush Mounting, AC Voltage [Key Characteristics Functional * 6.3mm mounting * 80 or 100 viewing angle Adaptable * Full colour range with lens options * Voltage and current options * Customer specials on request Resilient * IP66 sealed * -40 to 85C operating and storage temp * Aluminium, optional black anodised body [Specifications COLOURS Luminous Intensity White Red 375 P x P x 450 x P x 470 x x x mcd Yellow Green Blue High Intensity Reverse x 5,12,24 5,12,24 15 x P 5,12,24 5,12,24 15 P x 5,12,24 5,12,24 15 Lens Blank - Fresnel Lens P - Prominent Lens Finish Blank - Aluminium BB - Black Anodised Current (mA) Forward [Ordering Information OXL/CLH/63/ Voltage Lens Colour Blank - Coloured Lens CL - Clear Lens / Voltage 5AC - 5VAC 12AC - 12VAC 24AC - 24VAC / Terminations Blank - Spills FLXX - Flying Leads / / / Colours ALGaAsRD - High Intensity Red GN - High Intensity Green YW - High Intensity Yellow BE - High Intensity Blue WE - High Intensity White Example: OXL/CLH/63/12AC/FL30/ALGaAsRD - Aluminium Finish, Fresnel Lens, 12AC, Coloured Lens, 30cm Flying Leads, High Intensity Red Example: OXL/CLH/63/BB/P/24AC/FL30/GN - Black Anodised, Prominent Lens, 24AC, Coloured Lens, 30cm Flying Leads, High Intensity Green Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 10 PANEL LAMPS OXL/CLH/63/AC Series ALL DIMENSIONS IN MM [Technical Information Terminations Flying Leads, red and black wire insulation. Length defined in Part No. (CM) Body Aluminium Alloy, optional Black Anodised Lens Polycarbonate Nut Nickel Plated Brass Washer Spring Steel, Bright Zinc Plated Chassis Thickness 1mm (0.039") to 4mm (0.157") Mounting Hole 6.35mm 0.2 Recommended Mounting Torque 1Nm Mean Time Before Failure 90,000 hours [Termination Options Flying Leads [Lens Options Low Profile Prominent Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 11 PANEL LAMPS ODC:SM:40742/2 OXL/CLH/80 Series Cone Bezel or Prominent Bezel Indicator [Key Characteristics Functional * 8mm mounting * 80 viewing angle * Standard protective reflective cone bezel Resilient * IP66 sealed * -40 to 85C operating and storage temp Adaptable * Full colour range * Voltage and current options * Customer specials on request [Specifications COLOURS Luminous Intensity White Red Yellow Green Voltage Blue mcd Forward Reverse Current (mA) STD 34 45 x x P P P P P P x x 5,12,24,28 2.2 5,12,24,28 5 15 20 High Intensity 750 900 940 1000 1000 1200 1200 1250 P x x P x x x x x P x x x x P x P x x x P x x x x x P x x x x P x P x x x P x x 5,12,24,28 5,12,24,28 5,12,24,28 2.2 3.6 3.6 1.9 3.6 5,12,24,28 5,12,24,28 5,12,24,28 5 5 5 5 5 15 15 15 20 20 20 20 20 [Ordering Information Finish Blank - Aluminium (Black Anodised for Prominent) BB - Black Anodised (Option on Cone Bezel Only) OXL/CLH/80/ Lens Blank - Cone Bezel P - Prominent Lens / Voltage (in-line resistor only) Blank - <5VDC (Current Driven) 5 - 5VDC 12 - 12VDC 24 - 24VDC - 28VDC 28 / Colours RD - Red GN - Green YW - Yellow / Terminations Blank - Spills FLXX - Flying Leads (XX length in cm) / AlGaAsRD H/GN H/YW H/BE H/WE - High Intensity Red High Intensity Green High Intensity Yellow High Intensity Blue High Intensity White Example: OXL/CLH/80/GN - Cone Bezel, Aluminum Finish, Current Driven, Spills, Standard Intensity Green Example: OXL/CLH/80/5/FL99/H/GN - Cone Bezel, Aluminum Finish, 5VDC, Flying Leads 99cm, High Intensity Green Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 12 PANEL LAMPS OXL/CLH/80 Series ALL DIMENSIONS IN MM [Technical Information Terminations Silver Plated Body Aluminium on Cone Bezel, Prominent Black Anodised Lens LED Dome Nut Aluminium Alloy Washer BeCu. Tin Plated Chassis Thickness 1 to 5mm Mounting Hole 8mm + 0.2 Recommended Mounting Torque 1Nm (0.74lbft) Mean Time Before Failure 90,000 Hours [Termination Options Flying Leads Spills [Lens Options Cone Bezel Prominent Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 13 PANEL LAMPS ODC:SM:40746/1 OXL/CLH/80/AC Series Cone Bezel or Prominent Lens with AC Voltage [Key Characteristics Functional * 8mm mounting * 80 viewing angle Resilient * IP66 sealed * -40 to 85C operating and storage temp Adaptable * Full colour range * Voltage and current options * Customer specials on request [Specifications COLOURS Luminous Intensity White Red Yellow Green Voltage Blue mcd Forward Reverse Current (mA) High Intensity 370 P x x x x 12,24 12,24 7.5 450 x P x x x 12,24 12,24 7.5 380 x x P x x 12,24 12,24 7.5 470 x x x P x 12,24 12,24 7.5 450 x x x x P 12,24 12,24 7.5 [Ordering Information Finish Blank - Aluminium (Black Anodised for Prominent) BB - Black Anodised (Option on Cone Bezel Only) OXL/CLH/80/ Lens Blank - Cone Bezel P - Prominent Lens / Voltage 12AC - 12VAC 24AC - 24VAC Terminations FLXX - Flying Leads (XX length in cm) / / / Colours AlGaAsRD GN YW BE WE - High Intensity Red High Intensity Green High Intensity Yellow High Intensity Blue High Intensity White Example: OXL/CLH/80/12AC/FL30/AL - Cone Bezel, Aluminium Finish, 12VAC, Flying Leads 30cm, High Intensity Red Example: OXL/CLH/80/P/24AC/FL30/GN - Prominent Lens, Black Anodised Finish, 24VAC, Flying Leads 30cm, High Intensity Green Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 14 PANEL LAMPS OXL/CLH/80/AC Series ALL DIMENSIONS IN MM [Technical Information Terminations Flying Leads Insulation Red and Black Body Aluminium on Cone Bezel, Prominent Black Anodised Lens LED Dome Nut Aluminium Alloy Washer BeCu. Tin Plated Chassis Thickness 1 to 5mm Mounting Hole 8mm + 0.2 Recommended Mounting Torque 1Nm (0.74lbft) Mean Time Before Failure 90,000 Hours [Termination Options Flying Leads [Lens Options Cone Bezel Prominent Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 15 PANEL LAMPS ODC:SM:40763/1 OXL/CLH/100 Series Low Profile or Prominent with Flush Mounting [Key Characteristics Functional * 10mm mounting * 80 or 100 viewing angle Adaptable * Full colour range with lens options * Voltage and current options * Customer specials on request Resilient * IP66 sealed * -40 to 85C operating and storage temp * Aluminium black anodised body [Specifications COLOURS Luminous Intensity White Red Yellow Green Voltage Blue mcd Current (mA) Forward Reverse STD 34 45 x x P P P P P P x x 5,12,24,28 2.2 5,12,24,28 5 15 20 750 P x x P x x x x x P x x x x P x P x x x P x x x x x P x x x x P x P x x x P x x 5,12,24,28 5,12,24,28 15 5,12,24,28 5,12,24,28 15 5,12,24,28 5,12,24,28 15 2.2 5 20 3.6 5 20 3.6 5 20 1.9 5 20 3.6 5 20 900 High Intensity 940 1000 1000 1200 1200 1250 [Ordering Information Lens Blank - Low Profile Lens P - Prominent Lens OXL/CLH/100/ Voltage Blank 5 12 24 28 Lens Colour Blank - Coloured Lens CL - Clear Lens / <5VDC (current driven) 5VDC 12VDC 24VDC 28VDC Terminations Blank - Spills FLXX - Flying Leads / / Colours RD - Red GN - Green YW - Yellow / ALGaAsRD - High Intensity Red H/GN - High Intensity Green H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White Example: OXL/CLH/100/RD - Black Anodized Finish, Low Profile Lens, 2.2VDC, Coloured Lens, Spills, Red Example: OXL/CLH/100/P/5/CL/FL30/GN - Black Anodized Finish, Prominent Lens, 5VDC, Clear Lens, Flying Leads of 30cm, Green Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 16 PANEL LAMPS OXL/CLH/100 Series PROMINENT LENS BODY LENGTH 16.5 TYP ALL DIMENSIONS IN MM [Technical Information Terminations Silver Plated or Tin-Lead solderability exceeds BS2011, TEST T Body Aluminium Alloy Matt Black Anodised Lens Polycarbonate Nut Aluminium Alloy Washer BeCu. Tin Plated Chassis Thickness 1.5mm (0.059") min Mounting Hole 10.15mm 0.1 Recommended Mounting Torque 1Nm (0.74lbft) Mean Time Before Failure 90,000 Hours [Termination Options Flying Leads Spills [Lens Options Low Profile Prominent Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 17 PANEL LAMPS ODC:SM:40749/1 OXL/CLH/100/AC Series Low Profile or Prominent with Flush Mounting, AC Voltage [Key Characteristics Functional * 10mm mounting * 80 or 100 viewing angle Adaptable * Full colour range with lens options * Voltage and current options * Customer specials on request Resilient * IP66 sealed * -40 to 85C operating and storage temp * Aluminium black anodised body [Specifications COLOURS Luminous Intensity White Red Yellow Green mcd High Intensity Voltage Blue Current (mA) Forward Reverse 375 P x P x x 12,24 12,24 15 450 x P x x P 12,24 12,24 15 470 x x x P x 12,24 12,24 15 [Ordering Information Lens Blank - Low Profile Lens P - Prominent Lens Terminations FLXX - Flying Leads (XX length in cm) OXL/CLH/100/ Voltage 12AC 24AC 110 240 - / 12VAC 24VAC 110VAC 240VAC / / Colours AlGaAsRD GN YW BE WE - High Intensity Red High Intensity Green High Intensity Yellow High Intensity Blue High Intensity White Example: OXL/CLH/100/12AC/FL30/AlGaAsRD - Low Profile Lens, 12VAC, Flying Leads 30cm, High Intensity Red Example: OXL/CLH/100/P/110/FL30/YW - Prominent Lens, 110VAC, Flying Leads 30cm, High Intensity Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 18 PANEL LAMPS OXL/CLH/100/AC Series PROMINENT LENS BODY LENGTH 16.5 TYP ALL DIMENSIONS IN MM [Technical Information Terminations Flying Leads Body Aluminium Alloy Matt Black Anodised Lens Polycarbonate Nut Aluminium Alloy Washer BeCu. Tin Plated Chassis Thickness 1.5mm (0.059") min Mounting Hole 10.15mm 0.1 Recommended Mounting Torque 1Nm (0.74lbft) Mean Time Before Failure 90,000 Hours [Termination Options Flying Leads [Lens Options Low Profile Prominent Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 19 PANEL LAMPS ODC:SM:40750/1 2 & 3 OXL/CLH/100 Series Bi or Tri Colour Fresnel Lens [Key Characteristics Functional * 10mm mounting * 80 viewing angle * Replaces two or three single indicators * Independent LED indication Adaptable * Full colour range * Customer specials on request Resilient * IP66 sealed * -40 to 85C operating temp * -40 to 100C storage temp [Specifications COLOURS Luminous Intensity White Red Yellow Green Voltage Blue mcd Forward Reverse Current (mA) STD 25 30 35 x x x x P x P x x x x P x x x 2.2 1.9 2.2 5 5 5 20 20 20 High Intensity 1000 1000 1200 1200 1250 x P x x x x x x P x P x x x x x x x x P x x P x x 2.2 3.6 3.6 1.9 3.6 5 5 5 5 5 20 20 20 20 20 [Ordering Information Intensity Blank - Standard H - High Intensity Terminations Blank - Spills FLXX - Flying Leads (XX Length in cm) OXL/CLH/100/ Bi or Tri Segment 2 - Bi Coloured 3 - Tri Coloured / 2 colour / Colours RD - Red GN - Green YW - Yellow AR - Amber / / 3 colour BE - Blue (High Intensity Only) WE - White (High Intensity Only) Example: 2OXL/CLH/100/FL30/H/AR/BE - Bi Colour, 10mm Mounted, 30cm Flying Leads, High Intensity Amber and Blue Example: 3OXL/CLH/100/H/RD/GN/YW - Tri Colour, 10mm Mounted, High Intensity Red, Green and Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 20 PANEL LAMPS 2 & 3 OXL/CLH/100 Series ALL DIMENSIONS IN MM [Technical Information Terminations Silver Plated Terminations, Colour Coded Sleeve - Polyefin Body Aluminium Alloy, Matt Black Anodised Lens Polycarbonate, Clear Nut Aluminium Alloy Washer BeCu. - Tin Plated Chassis Thickness 1.5mm min Mounting Hole 10.15mm + 0.1 Recommended Mounting Torque 1Nm (0.74lbft) Mean Time Before Failure 90,000 hours [Termination Options Flying Leads Spills Telephone: +44 (0)1229 483226 * sales@oxleygroup.com * www.oxleygroup.com 21 PANEL LAMPS ODC:SM:40770/1 OXL/MIL50 Series Sub-Miniature Sealed Top and Rear [Key Characteristics Functional * 5mm mounting * 60 viewing angle Adaptable * Full colour range * Voltage and current options * Separate body and LED available * Customer specials available on request Rugged * Panel sealed to IP67 * -40 to 85C operating temp * -55 to 100C storage temp [Specifications COLOURS Luminous Intensity White Red Green Yellow mcd Std 15 20 750 900 High Intensity 940 1000 1000 1200 1200 1250 Voltage Blue Forward Reverse Current (mA) x x P P P P P P x x 5,12,24,28 5,12,24,28 P x x x P x x x x P x x x x P x P x x P x x x x x x P x x x x P x P x x x P x x 5,12,24,28 5,12,24,28 15 5,12,24,28 5,12,24,28 15 5,12,24,28 5,12,24,28 15 2.2 5 15 20 2.2 5 20 3.6 5 20 3.6 5 20 1.9 5 20 3.6 5 20 [Ordering Information Finish Blank - Aluminium, Black Anodised Shroud BB - Black Anodised OXL/MIL50/ EMI Shielding Blank - No EMI Shield SES - EMI Shield (Aluminium body only, shroud size changes) / Voltage Blank 5 12 24 28 - / <5VDC (Current Driven) 5VDC 12VDC 24VDC 28VDC Terminations Blank - Spills FLXX - Flying Leads (XX length in cm) / / Colours ALGaAsRD - High Intensity Red RD - Red GN - Green H/GN - High Intensity Green YW - Yellow H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White Example: OXL/MIL50/28/H/WE - Aluminium, Black Anodised Shroud, 28VDC, No EMI Shield, Spills, High Intensity White Example: OXL/MIL50/SES/FL20/GN - Aluminium, Black Anodised Shroud, Current Driven, EMI Shielding (longer body), Flying Leads 20cm, Green Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 22 OXL/MIL50 Series ALL DIMENSIONS IN MM [Technical Information Terminations Copper Alloy - Finish Silver on Tin Lead Shroud Aluminium Alloy, Matt Black Anodised Lens Glass Body and Nut Aluminium Alloy Washer BeCu. Tin Plated Sealing Ring Nylon Chassis Thickness 1mm - 4mm Mounting Hole 5mm + 0.1 Recommended Mounting Torque 0.5Nm Mean Time Before Failure 90,000 Hours [Termination Options Spills Flying Leads Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 23 ODC:SM: 40751/1 OXL/MIL50/AC Series Sub-Miniature Sealed Top and Rear AC Voltage [Key Characteristics Functional * 5mm mounting * 60 viewing angle * Operating from AC voltage Adaptable * Full colour range * Voltage and current options * Customer specials available on request Rugged * Panel sealed to IP67 * -40 to 85C operating temp * -55 to 100C storage temp [Specifications COLOURS Luminous Intensity AlgaAs Red Yellow 40 P x x x 750 x P x 360 x x 240 x 2080 x mcd White Blue Voltage Green Current (mA) High Intensity Forward Reverse x 5,12,15,24,28 5,12,15,24,28 15 x x 5,12,15,24,28 5,12,15,24,28 15 P x x 5,12,15,24,28 5,12,15,24,28 15 x x P x 5,12,15,24,28 5,12,15,24,28 15 x x x P 5,12,15,24,28 5,12,15,24,28 15 [Ordering Information Terminations FLXX - Flying Leads (XX length in cm) OXL/MIL50/ / / Colours ALGaAsRD - High Intensity Red H/GN - High Intensity Green H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White Voltage 5 - 5VAC 12 - 12VAC 15 - 15VAC 24 - 24VAC 28 - 28VAC Example: OXL/MIL50/24/FL30/H/WE - 24 VAC, Flying Leads 30cm, High Intensity White Example: OXL/MIL50/12/FL30/H/GN - 12 VAC, Flying Leads 30cm, High Intensity Green Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 24 OXL/MIL50/AC Series ALL DIMENSIONS IN MM [Technical Information Terminations Flying Leads, Insulation Red and Black, 30cm Standard Length Shroud Aluminium Alloy, Matt Black Anodised Lens Glass Body and Nut Aluminium Alloy Washer BeCu. Tin Plated Sealing Ring Nylon Chassis Thickness 1mm - 4mm Mounting Hole 5mm + 0.1 Recommended Mounting Torque 0.5Nm Mean Time Before Failure 90,000 Hours [Termination Options Flying Leads Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 25 ODC:SM:40753/1 OXL/MIL50 Sunlight Viewable Series Sub-Miniature Sealed Top and Rear Sunlight Viewable and NVG Compatible Option [Key Characteristics Functional * 5mm mounting * 60 viewing angle Adaptable * Full colour range * Voltage and current options * Customer specials available on request Rugged * Panel sealed to IP67 * -40 to 85C operating temp * -55 to 100C storage temp [Specifications COLOURS Luminous Intensity RAF mcd NVG mcd White Red Yellow Green Blue Voltage Reverse Forward Current (mA) Std 15 15 15 20 20 20 8 8 185 8 8 185 x x x x x x P x x P x x x P x x P x x x P x x P x x x x x x 5,12,24,28 5,12,24,28 5,12,24,28 5,12,24,28 5,12,24,28 5,12,24,28 2.2 5 2.2 5 2.2 5 15 15 15 20 20 20 High Intensity 750 750 900 900 940 1000 1000 1200 1200 1250 70 x x 20 900 88 x x 25 1100 x P x x x x P x x x x x x P x x x x P x P x x x x P x x x x x x x x P x x x x P x x P x x x x P x x 5,12,24,28 5,12,24,28 5,12,24,28 5,12,24,28 5,12,24,28 2.2 3.6 3.6 1.9 3.6 15 15 15 15 15 20 20 20 20 20 [Ordering Information Finish Blank - Aluminium, Black Anodised Shroud BB - Black Anodised Body OXL/MIL50/ Voltage Blank 5 12 24 28 - / <5VDC (Current Driven) 5VDC 12VDC 24VDC 28VDC EMI Shielding Blank - No EMI Shield SES - EMI Shield (Aluminium body only, shroud size changes) / RAF / Terminations Blank - Spills FLXX - Flying Leads (XX length in cm) / Colours ALGaAsRD - High Intensity Red RD - Red GN - Green H/GN - High Intensity Green YW - Yellow H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White Example: OXL/MIL50/28/RAF/H/NVG20 - 28VDC, High Intensity Night Vision Compatible Green Example: OXL/MIL50/RAF/SES/FL20/GN - EMI Shielding, Flying Leads 20cm, Green Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com 5,12,24,28 5,12,24,28 5,12,24,28 5,12,24,28 5,12,24,28 5 5 5 5 5 / NVG30 - Std Red NVG10 - Std Green NVG20 - Std Yellow H/NVG30 - High Intensity Red H/NVG10 - High Intensity Green H/NVG20 - High Intensity Yellow HIGH PERFORMANCE PANEL LAMPS 26 OXL/MIL50 Sunlight Viewable Series ALL DIMENSIONS IN MM [Technical Information Terminations Copper Alloy - Silver Plated Shroud Aluminium Alloy, Matt Black Anodised Lens Glass Body and Nut Aluminium Alloy Washer BeCu. Tin Plated Sealing Ring Nylon Chassis Thickness 1mm - 4mm Mounting Hole 5mm + 0.1 Recommended Mounting Torque 0.5Nm Mean Time Before Failure 90,000 Hours [Termination Options Spills Flying Leads Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 27 ODC:SM:40752/1 PS/LH/8 Series Panel Sealed Domed or Convex Lens [Key Characteristics Functional * 8mm mounting * 60 or 100 viewing angle * Short body length, ideal when space is critical Adaptable * Full colour range with lens options * Customer specials available on request Rugged * Panel sealed to IP68 * Glass and metal construction * -40 to 85C operating temp * -55 to 100C storage temp [Specifications COLOURS Luminous Intensity White Red Green Yellow Voltage Blue mcd Forward Reverse Current (mA) STD Low Current 40 x x P x x 2.2 5 20 50 x x P x 2.2 5 20 2 x x x x 1.8 5 2 2 x x P P x x P x x P x x 1.9 5 2 1.9 5 2 x P x x x x x x P x P x x x x x x x x P x x P x x 2.2 5 20 3.6 5 20 3.6 5 20 1.9 5 20 3.6 5 20 3 1000 High Intensity 1000 1200 1200 1250 [Ordering Information Lens Blank - Convex Lens DOM - Domed Lens Current Blank - Standard LC - Low Current PS/LH/8/ / Colours RD - Red - Green GN YW - Yellow / ALGaAsRD - High Intensity Red H/GN - High Intensity Green H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White Example: PS/LH/8/LC/RD - Convex Lens, Low Current, Red Example: PS/LH/8/DOM/H/YW - Domed Lens, High Intensity Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 28 PS/LH/8 Series ALL DIMENSIONS IN MM [Technical Information Terminations Copper Alloy, Silver Plated Shroud Aluminium Alloy, Matt Black Anodised Lens Glass Body and Nut Aluminium Alloy Washer BeCu. Tin Plated Sealing Ring PTFE Chassis Thickness 3mm (0.118") max Mounting Hole 8mm + 0.1 Recommended Mounting Torque 1Nm (0.74lbf.ft) Mean Time Before Failure 90,000 Hours [Termination Options [Lens Options Spills Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com Domed Convex HIGH PERFORMANCE PANEL LAMPS 29 ODC:SM:40744/2 PS/LH/8 Two Part Series Panel Sealed Convex Lens - Separate Body and LED [Key Characteristics Functional * 8mm mounting * 60 viewing angle * 2 part construction Rugged * Panel sealed to IP68 * Glass and metal construction * -40 to 85C operating temp * -55 to 100C storage temp Adaptable * Full colour range * Customer specials available on request [Specifications COLOURS Luminous Intensity White Red Green Yellow mcd Std Voltage Blue Forward Reverse Current (mA) High Intensity 20 x P P P x 2.2 5 20 1000 x x P x x 2.2 5 20 1000 P x x x x 3.6 5 20 1200 x x x x P 3.6 5 20 1200 x P x x x 1.9 5 20 1250 x x x P x 3.6 5 20 [Ordering Information EMI Shielding Blank - No EMI Shield SES - EMI Shield PS/LH/8/ Lens Blank - Convex Lens DOM - Domed Lens 2 Part Construction Body and LED / Colours BDY RD GN YW - / LX / Body Only Red Green Yellow ALGaAsRD - High Intensity Red H/GN - High Intensity Green H/YW - High Intensity Yellow Example: PS/LH/8/SES/LX/GN - Convex Lens, EMI Shielding, 2 Part, Green Example: PS/LH/8/LX/H/YW - Convex Lens, 2 Part, High Intensity Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 30 PS/LH/8 Two Part Series ALL DIMENSIONS IN MM [Technical Information Terminations Copper Alloy Shroud Aluminium Alloy, Matt Black Anodised Lens Glass Body and Nut Aluminium Alloy (Clear) Washer BeCu. Tin Plated Sealing Ring PTFE Chassis Thickness 3mm (0.118") max Mounting Hole 8mm + 0.1 Recommended Mounting Torque 1Nm (0.74lbf.ft) Mean Time Before Failure 90,000 Hours [Termination Options [Lens Options Spills Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com Domed Convex HIGH PERFORMANCE PANEL LAMPS 31 ODC:SM:40755/1 PS/LH/8 Sunlight Viewable Series Panel Sealed Sunlight Viewable and NVG Compatible Option [Key Characteristics Functional * 8mm mounting * 30 or 100 viewing angle * Short body length, ideal when space is critical Adaptable * Full colour range with lens options * 2 part option (LX) for wireless detachment * EMI shield available with 2 part option * Customer specials available on request Rugged * Panel sealed to IP68 * Glass and metal construction * -40 to 85C operating temp * -55 to 100C storage temp [Specifications COLOURS Luminous Intensity Std High Intensity NVG mcd RAPP mcd RAF mcd White Red Yellow 1 1 12 1 2 15 x x x P P x x P 20 45 300 n/a 45 300 n/a 54 360 25 54 360 25 56 375 x P x x x x x x P x P x x x x x x x x P [Ordering Information Voltage Blue Current (mA) Forward Reverse x x 2.2 5 20 2.2 5 20 x x P x x 2.2 5 20 3.6 5 20 3.6 5 20 1.9 5 20 3.6 5 20 Terminations Blank - Spills FLXX - Flying Leads (XX length in cm) LX - Separate Body and LED Lens RAF - 30 Viewing Angle RAPP - 100 Viewing Angle PS/LH/8/ Green / / EMI Shielding (with LX only) Blank - No EMI Shield SES - EMI Shield / Colours RD - Red GN - Green YW - Yellow ALGaAsRD - High Intensity Red H/GN - High Intensity Green H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White NVG Compatible NVG30 - Standard Red NVG10 - Standard Green NVG20 - Standard Yellow H/NVG30 - High Intensity Red H/NVG10 - High Intensity Green H/NVG20 - High Intensity Yellow Example: PS/LH/8/RAPP/RD - 100 Viewing Angle, Spill Terminations, Red Example: PS/LH/8/RAF/SES/LX/NVG10 - 30 Viewing Angle, EMI Shield, Separate Body and LED, Night Vision Compatible Green Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 32 PS/LH/8 Sunlight Viewable Series ALL DIMENSIONS IN MM [Technical Information Terminations Copper Alloy, Silver Plated Shroud Aluminium Alloy, Matt Black Anodised Lens Glass Body and Nut Aluminium Alloy Washer BeCu. Tin Plated Sealing Ring PTFE Chassis Thickness 3mm (0.118") max Mounting Hole 8mm + 0.1 Recommended Mounting Torque 1Nm (0.74lbf.ft) Mean Time Before Failure 90,000 Hours [Termination Options Flying Leads Spills Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 33 ODC:SM:40754/1 STR/LH/8 Series Sealed Top and Rear Domed or Convex Lens [Key Characteristics Functional * 8mm mounting * 60 or 100 viewing angle Adaptable * Full colour range with lens options * Voltage and current options * Customer specials on request Resilient * IP68 sealed * Glass and metal construction * -40 to 85C operating temp * -55 to 100C storage temp [Specifications COLOURS White Red Yellow Green Blue STD 30 38 40 50 x x x x x P x P P x P x x P x P High Intensity Luminous Intensity 750 900 940 1000 1000 1200 1200 1250 P x x x P x x x x P x x x x P x P x x P x x x x x x P x x x x P mcd [Ordering Information Finish Blank - Aluminium C - Chromate STR/LH/8/ Voltage Blank 5 12 15 24 28 - / <5VDC (current driven) 5VDC 12VDC 15VDC 24VDC 28VDC Voltage Current (mA) Forward Reverse x x x x 5,12,15,24,28 5,12,15,24,28 2.2 2.2 5,12,15,24,28 5,12,15,24,28 5 5 15 15 20 20 x P x x x P x x 5,12,15,24,28 5,12,15,24,28 5,12,15,24,28 2.2 3.6 3.6 1.9 3.6 5,12,15,24,28 5,12,15,24,28 5,12,15,24,28 5 5 5 5 5 15 15 15 20 20 20 20 20 Terminations Blank - Spills FLXX - Flying Leads (XX length in cm) REF1 - Tags Lens Blank - Convex Lens 60 Viewing Angle DOM - Domed Lens 100 Viewing Angle / / EMI Shielding Blank - No EMI Shield SES - EMI Shield / Colours RD - Red GN - Green YW - Yellow / ALGaAsRD - High Intensity Red H/GN - High Intensity Green H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White Example: STR/LH/8/RD - Aluminium Alloy Finish, Current Driven, No Emi Shield, Convex Lens, Spill terminations, Red Example: STR/LH/8/5/SES/DOM/FL20/H/GN Aluminium Alloy Finish, 5 VDC, EMI Shielding, Domed Lens, Flying Leads of 20cm and High Intensity Green Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 34 STR/LH/8 Series ALL DIMENSIONS IN MM [Technical Information Terminations Copper Alloy, Silver Plated Shroud Aluminium Alloy, Matt Black Anodised Lens Glass Body and Nut Aluminium Alloy Washer BeCu Tin Plated Sealing Ring PTFE Chassis Thickness 3mm (0.118") max Mounting Hole 8mm + 0.1 Recommended Mounting Torque 1Nm (0.74lb.ft) Mean Time Before Failure 90,000 hours [Termination Options Flying Leads Spills [Lens Options Convex Tags Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com Dome HIGH PERFORMANCE PANEL LAMPS 35 ODC:SM:40761/1 STR/LH/8/AC Series Sealed Top and Rear Mains AC Powered [Key Characteristics Functional * 8mm mounting * 60 viewing angle Adaptable * Full colour range * Two voltage options * Customer specials on request Resilient * IP68 sealed * Glass and metal construction * -40 to 85C operating temp * -55 to 100C storage temp [Specifications COLOURS Luminous Intensity High Intensity White AlgaAs Red Blue Yellow Green 125 P x x x x 240/2.5 150 x P x x x 300 240/2.5 150 x x P x x 110/5 250 240/2.5 125 x x x P x 110/5 315 240/2.5 160 x x x x P VAC/mA mcd VAC/mA mcd 110/5 250 240/2.5 110/5 300 110/5 [Ordering Information Terminations Blank - Flying Leads 20cm FLXX - Flying Leads (XX length in cm) REF1 - Tags EMI Shielding Blank - No EMI Shield SES - EMI Shield STR/LH/8/ / Voltage 110 - 110VAC 230 - 230VAC 240 - 240VAC / / Colours AL - High Intensity Red GN - High Intensity Green YW - High Intensity Yellow BE - High Intensity Blue WE - High Intensity White Example: STR/LH/8/110/FL30/GN - 110VAC, Flying Leads 30cm, High Intensity Green Example: STR/LH/8/240/REF1/YW - 240VAC, Tag Terminations, High Intensity Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 36 STR/LH/8/AC Series ALL DIMENSIONS IN MM [Technical Information Terminations Flying Leads - Raychem Type 44 Wire Insulation (24 Gauge) REF 1 - Brass Silver Plated or Tin lead Shroud Aluminium Alloy, Black Anodised Lens Glass Body and Nut Aluminium Alloy Washer BeCu Tin Plated Sealing Ring PTFE Chassis Thickness 3mm (0.118") max Mounting Hole 8mm + 0.1 Recommended Mounting Torque 1Nm (0.74lb.ft) Mean Time Before Failure 90,000 hours [Termination Options Flying Leads Tags Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 37 ODC:SM:40758/1 STR/LH/8 Sunlight Viewable Series Sealed Top and Rear Sunlight Viewable and NVG Compatible Option [Key Characteristics Functional * 8mm mounting * 30 or 100 viewing angle * Visible up to 100,000 LUX ambient illumination * Optional night vision compatability Rugged * Panel sealed to IP68 * Glass and metal construction * -40 to 85C operating temp * -55 to 100C storage temp Adaptable * Full colour range * Voltage and current options * Customer specials available on request [Specifications COLOURS Luminous Intensity RAPP RAF mcd mcd Standard 0.75 1.5 1 2 9 12 12 15 Night Vision 5 5 5 24 18 12 High Intensity 34 41 42 45 45 54 54 56 225 270 282 300 300 360 360 375 White Red x x x x x x x P x x x P x x x x P x P x x P x P x x x x P x [Ordering Information Voltage Blank - <5vDC (current driven) 5 - 5vDC 24 - 24vDC 12 - 12vDC 28 - 28vDC STR/LH/8/ Finish Blank - Aluminium C - Chromate / Yellow Green P x P x P x x P x x P x x x x Voltage Blue x P x P x P x x x P x x x x P x x x x x x x x P x x x P x x Forward Reverse 5,12,24,28 5,12,24,28 2.2 2.2 5,12,24,28 5,12,24,28 5 5 / Lens RAF - 30 Viewing Angle RAPP - 100 Viewing Angle Example: STR/LH/8/5/RAPP/SES/H/GN Aluminium Body, 5vDC, 100 Viewing Angle, EMI Shielding, High Intensity Green Example: STR/LH/8/RAF/NVG20 Aluminium Body, Current Driven, 30 Viewing Angle, Night Vision Compatible Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com 15 15 20 20 Any combination - as "Standard" above 5,12,24,28 5,12,24,28 5,12,24,28 2.2 3.6 3.6 1.9 3.6 5,12,24,28 5,12,24,28 5,12,24,28 5 5 5 5 5 15 15 15 20 20 20 20 20 Terminations Blank - Spills FLXX - Flying Leads (XX length in cm) REF1 - Tags EMI Shielding Blank - No EMI Shield SES - EMI Shield / Current (mA) / / Colours RD - Red GN - Green YW - Yellow ALGaAsRD - High Intensity Red H/GN - High Intensity Green H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White NVG Compatible NVG30 - Standard Red NVG10 - Standard Green NVG20 - Standard Yellow H/NVG30 - High Intensity Red H/NVG10 - High Intensity Green H/NVG20 - High Intensity Yellow HIGH PERFORMANCE PANEL LAMPS 38 STR/LH/8 Sunlight Viewable Series [Technical Information Terminations Copper Alloy, Silver Plated Shroud Aluminium Alloy, Matt Black Anodised Lens Glass Body and Nut Aluminium Alloy Washer BeCu. Tin Plated Sealing Ring PTFE Chassis Thickness 3 max Mounting Hole O 8 + 0.1 Recommended Mounting Torque 1Nm (0.74lbf.ft) Mean Time Before Failure 90,000 Hours [Termination Options Flying Leads Spills Tags Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 39 ODC:SM:40757/1 2 & 3 STR/LH8 Series Bi or Tri Colour Fresnel Lens [Key Characteristics Functional * 8mm mounting * 60 or 100 viewing angle * Replaces two or three single indicators * Independent LED indication Adaptable * Full colour range * Customer specials on request Resilient * IP68 sealed * -40 to 85C operating temp * -55 to 100C storage temp [Specifications COLOURS Luminous Intensity Yellow Red Voltage Green mcd Current (mA) Forward Reverse STD 30 x P x 2.2 5 20 50 P x x 1.9 5 20 30 x x P 2.2 5 20 [Ordering Information Termination FLXX - Flying Lead (XX length in cm) Lens Option Blank - Convex Lens DOM - Domed Lens STR/LH/8/ Bi or Tri Colour 2 - Bi Colour 3 - Tri Colour 2 colours / / EMI Shielding Blank - No EMI Shield SES - EMI Shielding / / Colours RD - Standard Red GN - Standard Green YW - Standard Yellow / 3 colours Example: 2STR/LH/8/SES/FL20/RD/GN - Bi Colour, EMI Shielding, 20cm Flying Leads, Standard Red and Green Example: 3STR/LH/8/FL30/RD/GN/YW - Tri Colour, 30cm Flying Leads, Standard Red, Green and Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 40 2 & 3 STR/LH8 Series ALL DIMENSIONS IN MM [Technical Information Terminations Flying Leads - Raychem 44 Body & Nut Aluminium Alloy Lens Glass Shroud Aluminium Alloy, Black Anodised Sealing Ring PTFE Washer BeCu. - Tin Plated Chassis Thickness 3mm (0.118") max Mounting Hole 8mm + 0.1 Recommended Mounting Torque 1Nm (0.74lbft) Mean Time Before Failure 90,000 hours [Termination Options 2 Pin [Lens Options 3 Pin Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com Dome Convex HIGH PERFORMANCE PANEL LAMPS 41 ODC:SM:40804/1 STR/LH23 Series Sealed Top and Rear Domed Lens [Key Characteristics Functional * 10mm mounting * 100 viewing angle Adaptable * Full colour and voltage range * Customer specials on request Resilient * IP68 sealed * Black anodised body * -40 to 85C operating temp * -55 to 100 storage temp [Specifications COLOURS Luminous Intensity Red Amber Yellow mcd Std Std 38 30 30 38 50 40 40 50 P x x x P x x x x P x x x P x x Voltage Green x x P x x x P x x x x P x x x P Forward Reverse 5,12,24,28 5,12,24,28 5,12,24,28 5,12,24,28 1.9 2.2 2.2 2.2 5,12,24,28 5,12,24,28 5,12,24,28 5,12,24,28 5 5 5 5 Current (mA) 15 15 15 15 20 20 20 20 [Ordering Information STR/LH23/10/ / Voltage WR - <5VDC (Current Driven) 5 - 5VDC 12 - 12VDC 15 - 15VDC 24 - 24VDC 28 - 28VDC Colours RD AR YW GN - Red Amber Yellow Green Example: STR/LH23/10/WR/RD - 10mm Mounted, Current Driven, Red Example: STR/LH23/10/5/GN - 10mm Mounted, 5 Volt, Green Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 42 STR/LH23 Series ALL DIMENSIONS IN MM [Technical Information Terminations Copper Alloy - Silver Plated Shroud & Body Aluminium Alloy Matt Black Anodised Lens Glass Nut Aluminium Alloy Washer BeCu. Tin Plated Sealing Ring Fluorocarbon Rubber Chassis Thickness 6.5mm max Mounting Hole 10.15mm + 0.1 Recommended Mounting Torque 1Nm (0.74lbft) Mean Time Before Failure 90,000 Hours [Termination Options Spills Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 43 ODC:SM:40772/1 2 & 3 STR/LH23 Series Bi or Tri Segmented LEDs Sealed Top and Rear [Key Characteristics Functional * 10mm mounting * 60 viewing angle * Replaces two or three single indicators * Independently addressable segments Adaptable * Full colour range * Customer specials on request Resilient * IP68 sealed * -40 to 85C operating temp * -55 to 100C storage temp [Specifications COLOURS Luminous Intensity White Red Yellow Green mcd STD 12 15 1000 High Intensity 1000 1200 1200 1250 Current (mA) Voltage Blue Forward Reverse x x x P P x x P x x 2.2 5 20 2.2 5 20 x P x x x x x x P x P x x x x x x x x P x x P x x 2.2 5 20 3.6 5 20 3.6 5 20 1.9 5 20 3.6 5 20 [Ordering Information Intensity Blank - Standard H - High Intensity STR/LH23/10/ Bi or Tri Segment 2 - Bi Segmented 3 - Tri Segmented 2 segment colours / Colours RD - Red GN - Green YW - Yellow / / 3 segment colours BE WE - Blue (High Intensity Only) - White (High Intensity Only) Example: 2STR/LH23/10/RD/GN - Bi Segment, Standard Intensity, Red and Green Example: 3STR/LH23/10/H/RD/GN/YW - Tri Segment, High Intensity, Red, Green and Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 44 2 & 3 STR/LH23 Series ALL DIMENSIONS IN MM [Technical Information Terminations Copper Alloy - Silver Plated Shroud & Body Aluminium Alloy, Matt Black Anodised Lens Glass Nut Aluminium Alloy Washer BeCu. - Tin Plated Sealing Ring Fluorocarbon Rubber Chassis Thickness 6.5mm max Mounting Hole 10.15mm + 0.1 Recommended Mounting Torque 1Nm (0.74lbft) Mean Time Before Failure 90,000 hours [Termination Options Spills Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 45 ODC:SM:40773/1 STR/LH10 Series Sealed Top and Rear Domed or Convex Lens [Key Characteristics Functional * 10mm mounting * 60 to 100 viewing angle Resilient * IP68 sealed * Glass and metal construction * -40 to 85C operating temp * -55 to 100C storage temp Adaptable * Full colour range with lens options * Voltage and current options * Customer specials on request [Specifications COLOURS Luminous Intensity White mcd AlGaAs Red Yellow Green Voltage Blue Forward Reverse Current (mA) High Intensity 3000 P x x x x 5,12,15,24,28 5,12,15,24,28 9 250 x P x x x 5,12,15,24,28 5,12,15,24,28 15 2500 x x P x x 5,12,15,24,28 5,12,15,24,28 15 3000 x x x P x 5,12,15,24,28 5,12,15,24,28 9 1000 x x x x P 5,12,15,24,28 5,12,15,24,28 15 Running at AC voltage will reduce the luminous intensity by about half [Ordering Information Lens Options Blank - Convex Lens DOM - Domed Lens EMI Shielding Blank - No EMI Shield SES - EMI Shield STR/LH10/ Voltage Blank 5 12 15 24 28 - / / / Colours AlGaAsRD H/GN H/YW H/BE H/WE <5VDC (Current Driven) 5VDC/AC 12VDC/AC 15VDC/AC 24VDC/AC 28VDC/AC - Termination FLXX - Flying Lead (XX length in cm) / High Intensity Red High Intensity Green High Intensity Yellow High Intensity Blue High Intensity White Example: STR/LH10/12/FL30/H/GN - 12VDC/AC, No EMI Shield, Convex Lens, Flying Leads 30cm, High Intensity Green Example: STR/LH10/SES/FL30/AlGaAsRD - Current Driven, EMI Shield, Convex Lens, Flying Leads 30cm, High Intensity Red Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 46 STR/LH10 Series ALL DIMENSIONS IN MM [Technical Information Terminations Flying Leads - Raychem 44, 24AWG Shroud Aluminium Alloy, Black Anodised Lens Glass Body and Nut Aluminium Alloy Washer BeCu Tin Plated Sealing Ring Fluorocarbon Rubber Chassis Thickness 6.5mm max Mounting Hole 10.15mm + 0.1 Recommended Mounting Torque 1Nm (0.74lb.ft) Mean Time Before Failure 90,000 hours [Termination Options [Lens Options Flying Leads Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com Convex Dome HIGH PERFORMANCE PANEL LAMPS 47 ODC:SM:40774/1 STR5/LH/8 Series Sealed Top and Rear, Rear Mounting Sunlight Viewable and NVG Option [Key Characteristics Functional Adaptable * 8mm rear mounting * Customer specials on request * 30, 60 or 100 viewing angle * Removal from chassis possible without removing terminations Resilient * IP67 sealed * Flat diffused lens * -55 to 100C operating and storage temp [Specifications COLOURS Luminous Intensity Yellow Green Voltage Blue Current (mA) Std mcd RAPP mcd RAF mcd 40 50 1 2 12 15 x x x P P x x P x x 2.2 2.2 5 5 20 20 High Intensity Red STD White 1000 1000 1200 1200 1250 45 45 54 54 56 300 300 360 360 375 x P x x x x x x P x P x x x x x x x x P x x P x x 2.2 3.6 3.6 1.9 3.6 5 5 5 5 5 20 20 20 20 20 Forward Reverse [Ordering Information Nut Finish Blank - Stainless Steel BN - Black Anodised STR5/LH/8/ Terminations Blank - Spills FLXX - Flying Leads (XX length in cm) / / Lens Blank - 60 Viewing Angle (not on NVG) RAF - 30 Viewing Angle RAPP - 100 Viewing Angle Example: STR5/LH/8/BN/H/GN Black Anodised Nut, 60 Viewing Angle, Spills, High Intensity Green Example: STR5/LH/8/RAF/NVG20 Stainless Steel Nut, 30 Viewing Angle, Spills, Night Vision Compatible Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com / Colours RD - Red GN - Green YW - Yellow ALGaAsRD - High Intensity Red H/GN - High Intensity Green H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White NIGHT VISION NVG30 - Standard Red NVG10 - Standard Green NVG20 - Standard Yellow H/NVG30 - High Intensity Red H/NVG10 - High Intensity Green H/NVG20 - High Intensity Yellow HIGH PERFORMANCE PANEL LAMPS 48 STR5/LH/8 Series ALL DIMENSIONS IN MM [Technical Information Terminations Silver Plated or Tin-Lead. Solderability exceeds BS2011, TEST T Body Aluminium Alloy Body Finish, Matt Black Anodised Lens Glass Nut Stainless Steel (passivated finish) optional Matt Black Anodised Lockwasher Stainless Steel (passivated finish) Chassis Thickness 1.5mm min Panel Seal Fluorocarbon Rubber Recommended Mounting Torque 1Nm Mean Time Before Failure 90000 hours [Termination Options Flying Leads Spills ? Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 49 ODC:SM:40759/1 STR501/LH/8 Series Sealed Top and Rear, Rear Mounting Sunlight Viewable and NVG Option [Key Characteristics Resilient Adaptable * IP67 sealed * Customer specials on request * Flat diffused lens * Viewing angle options * -55 to 100C operating and storage temp Functional * 8mm rear mounting * 30, 60 or 100 viewing angle * Removal from chassis possible without removing terminations [Specifications COLOURS Luminous Intensity Yellow Voltage Current (mA) Std High Intensity Std mcd RAPP mcd RAF mcd White 40 1 12 x x P x x 2.2 5 20 50 2 15 x P x P x 2.2 5 20 1000 45 300 x x P x x 2.2 5 20 1000 45 300 P x x x x 3.6 5 20 1200 54 360 x x x x P 3.6 5 20 1200 54 360 x P x x x 1.9 5 20 1250 56 375 x x x P x 3.6 5 20 Red Green Forward Reverse [Ordering Information Lens Blank - 60 Viewing Angle (not on NVG option) RAF - 30 Viewing Angle Sunlight Viewable RAPP - 100 Viewing Angle Sunlight Viewable STR501/LH/8/ Voltage Blank 5 12 24 28 Blue / <5VDC (current driven) 5VDC 12VDC 24VDC 28VDC Terminations Blank - Spills FLXX - Flying Leads (XX length in cm) / / Colours RD - Red GN - Green YW - Yellow ALGaAsRD - High Intensity Red H/GN - High Intensity Green H/YW - High Intensity Yellow H/BE - High Intensity Blue H/WE - High Intensity White NIGHT VISION NVG30 - Standard Red NVG10 - Standard Green NVG20 - Standard Yellow H/NVG30 - High Intensity Red H/NVG10 - High Intensity Green H/NVG20 - High Intensity Yellow Example: STR501/LH/8/28/GN - 60 Viewing Angle, 28 volts, Spills, Green Example: STR501/LH/8/RAPP/NVG30 - 100 Viewing Angle, Sunlight Viewable, Spills, Night Vision Compatible Red Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 50 STR501/LH/8 Series ALL DIMENSIONS IN MM [Technical Information Terminations Copper or Iron Alloy: Finish Tin Lead Body & Nut Aluminium, Matt Black Anodised Lockwasher Corrosion Resistant Steel Rear Potting Black Stycast Compound Chassis Thickness 1.7mm max Recommended Mounting Torque 1Nm Mean Time Before Failure 90000 hours [Termination Options Flying Leads Spills ? Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 51 ODC:SM:40762/1 DESC 85122 Series DESC 85122 Approved Indicator Lamps [Key Characteristics Functional * 8mm mounting * DESC approved for use in DoD projects * Approved to DESC drawing 85122 Adaptable * Full colour range * Operating and storage temp -55 to 100 Resilient * IP68 sealed * Glass and metal construction * 100% screened against Table I and II of DESC drawing 85122. Including burn-in, seal temperature cycling and luminous intensity [Ordering Information DESC Drawing Dash Number Oxley Part Number Oxley Series Type 85122-X01 OX1100X PS/LH/8 85122-X02 OX2100X STR/LH/8 85122-X11 OX2101X STR/LH/8/SES 85122-X05 OX2200X STR/LH/8/RAF 85122-X06 OX2300X STR/LH/8/RAPP 85122-X07 OX2210X STR/LH/8/HS/RAF 85122-X08 OX2310X STR/LH/8/HS/RAPP 85122-X09 OX2211X STR/LH/8/RAF/SES 85122-X010 OX2311X STR/LH/8/RAPP/SES 85122-X03 OX1200X PS/LH/8/RAF 85122-X04 OX1300X PS/LH/8/RAPP 85122-X12 OX1250X PS/LH/8/RAF/FL * Where X equals the color, R - Red, G - Green and Y - Yellow Example: 85122-R01 (OX1100R) Red Desc Lamp Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 52 DESC 85122 Series -X02, -X11 -X01 -X05, -X06, -X07, -X08, -X09, -X10 -X03, -X04, -X12 (flying leads) ALL DIMENSIONS IN MM [Technical Information Terminations Shroud Lens Body & Nut Washer Sealing Ring Chassis Thickness Mounting Hole Recommended Mounting Torque Mean Time Before Failure Copper Alloy - Silver Plated or Tin-Lead Aluminium Alloy - Matt Black Anodised Glass Aluminium Alloy - Finish to MIL-C-5541 Class 3 BeCu - Nickel Plated PTFE 3mm (0.118") max 8mm + 0.1 1Nm (0.74lb/ft) 90000 hours [Termination Options Spills Please add A to the end of the part number or leave blank for Tin Lead Finish terminations and B for Silver. Example 85122-G11A (OX2101G Tin Lead) ? Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 53 ODC:SM:40764/1 DESC 87019 Series DESC 87019 Approved Indicator Lamps [Key Characteristics Functional * 8mm mounting * Meets US CECOM Secure Lighting * Approved to DESC drawing 87019 Adaptable * Full colour range * Operating and storage temp -55 to 100 Resilient * IP68 sealed * Glass and metal construction * 100% screened against Table I and II of DESC drawing 85122. Including burn-in, seal temperature cycling and luminous intensity [Specifications COLOURS Luminous Intensity Red Yellow Voltage Green mcd Current (mA) Forward Reverse Secure 1.5 P x x 2.2 5 5 2 x P x 2.2 5 5 2.5 x x P 2.2 5 5 [Ordering Information DESC Drawing Dash Number Oxley Part Number Oxley Series Type Features 87019 - X01* OX2410X* STR/LH/8/XIR Secure 87019 - X02* OX2411X* STR/LH/8/SES Secure - EMI Screen * Where X equals the color, R -Red, G - Green and Y - Yellow Example: 87019-R01 (OX2410R) Red Secure Desc Lamp Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 54 DESC 87019 Series ALL DIMENSIONS IN MM [Technical Information Terminations Lens Copper Alloy - Silver Plated or Tin-Lead Aluminium Alloy - Black Anodised (Matt) to MIL-A-8625 Type Class 2 (Dyed Matt Black) Glass - AR Coated to MIL-C-14806 Body & Nut Aluminium Alloy - Finish to MIL-C-5541 Class 3 (MIL DTL 5541) Washer BeCu - Nickel Plated Sealing Ring PTFE Chassis Thickness 3mm (0.118") max Mounting Hole 8mm + 0.1 Recommended Mounting Torque 1Nm (0.74lb/ft) Mean Time Before Failure 90000 hours Shroud [Termination Options Spills Please add A to the end of the part number or leave blank for Tin Lead Finish terminations and B for Silver. Example 87019-G01A (OX2410G Tin Lead) ? Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 55 ODC:SM:40765/1 STR/NLH Series Sealed Top and Rear Neon Indicator Mains (AC) Powered [Key Characteristics Functional * 8mm mounting * 80 viewing angle Resilient * IP68 sealed * Glass and metal construction * -40 to 85C operating temp * -55 to 100 storage temp Adaptable * Full colour range with lens options * Two voltage variants available * Coloured diffused lens * Customer specials on request [Specifications COLOURS Luminous Intensity Clear Red Amber Green Voltage VAC Current mA 125 P x x x 110/240 1 150 x P x x 110/240 2 150 x x P x 110/240 3 160 x x x P 110/240 4 mcd High Intensity [Ordering Information STR/NLH/ Colours 31 32 34 36 - Terminations Blank - Flying Leads of 20cm FLXX - Flying Leads (XX length in cm) REF1 - Tag Terminations EMI Shielding Blank - No EMI Shield SES - EMI Shield / / / Voltage WR - Without Resistor 110 - 110VAC 240 - 240VAC Red Amber Green Clear Example: STR/NLH/31/110/SES - Red Neon Indicator, 110 VAC, EMI Shielded, 20cm Flying Leads Example: STR/NLH/34/REF1/240 - Green Neon Indicator, 240 VAC, Tag Terminations Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 56 STR/NLH Series ALL DIMENSIONS IN MM [Technical Information Terminations Flying Leads - Raychem 44, Tags - Brass, Silver Plated Shroud Aluminium Alloy Matt Black Anodised Lens Glass Body & Nut Aluminium Alloy Washer BeCu. Tin Plated Sealing Ring PTFE Chassis Thickness 3mm (0.118") max Mounting Hole 8mm + 0.1 Recommended Mounting Torque 1Nm (0.74lbft) Mean Time Before Failure 90,000 Hours [Termination Options Flying Leads Tags Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com HIGH PERFORMANCE PANEL LAMPS 57 ODC:SM:40771/1 ELED/682 Series T1 Midget Flanged Cap Bulb Replacements [Key Characteristics Functional * Reduces power consumption * Reduces maintenance costs * 130 viewing angle Resilient * Meets MIL-DTL-6363H/6363/6A * 100,000 hours mean time between failure Adaptable * Operating and storage temp -40 to 85C * Replaces less reliable filament bulbs * Voltage options * Available in a variety of colours [Specifications COLOURS Luminous Intensity High Intensity White Red Blue Yellow Green 300 P x x x x 20 50 x P x x x 3.2,5,12,15,24,28 20 90 x x P x x 2,5,12,15,24,28 20 40 x x x P x 3. 2,5,12,15,24,28 20 300 x x x x P VDC mA mcd 3.2,5,12,15,24,28 20 2,5,12,15,24,28 [Ordering Information Centre Contact Polarity A - Anode C - Cathode ELED/682/2/ Voltage 5 12 15 24 28 / / Colours RD GN YW WE BE - 5VDC 12VDC 15VDC 24VDC 28VDC Red Green Yellow White Blue Example: ELED/682/2/5/A/RD - 5 VDC, Anode Centre Contact, Red Example: ELED/682/2/12/C/WE - 12 VDC, Cathode Centre Contact, White Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com FILAMENT BULB REPLACEMENTS 58 ELED/682 Series ALL DIMENSIONS IN MM [Technical Information Terminations Centre Contact Anode or Cathode Max Current Draw 20mA Typical Input Voltage Optional Viewing Angle 130 Typical Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com FILAMENT BULB REPLACEMENTS 59 ODC:SM:40767/1 ELED/1750 DMC Series T13/4 Midget Flange Bulb Replacements [Key Characteristics Functional Adaptable * 6 LED chips for maximum light output * Full colour range * High reliability replacement for T13/4 * Dual polarity tungsten incandescent bulbs * Customer specials on request Resilient * High thermal conductivity * Aluminium spacer eliminates thermoplastic fire risk * Operating and storage temp -40 to 70C [Specifications COLOURS Luminous Intensity Red Yellow Green Standard VAC or VDC mA mcd 28 20 70 P x x 28 20 20 x P x 28 20 20 x x P [Ordering Information ELED/1750/DMC/28/ Colours D/ALRD GN YW - Standard Intensity Red Standard Intensity Green Standard Intensity Yellow Example: ELED//1750/DMC/28/D/ALRD - 28 VAC or VDC, Standard Intensity Red Example: ELED/1750/DMC/28/YW - 28VAC or VDC, Standard Intensity Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com FILAMENT BULB REPLACEMENTS 60 ELED/1750 DMC Series ALL DIMENSIONS IN MM [Technical Information Terminations Dual Polarity Centre Contact Max Current Draw 14mA Typical Input Voltage 24 to 28 VAC or VDC Mean Time Between Failure 90,000 Hours Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com FILAMENT BULB REPLACEMENTS 61 ODC:SM:40768/2 ELED/T5.5 Series T5.5 Telephone Slide Base Bulb Replacements [Key Characteristics Functional * 5mm mounting * 120 viewing angle Adaptable * Full colour range * Voltage and current options * Customer specials on request Resilient * Operating and storage temp -20 to 80C [Specifications COLOURS Luminous Intensity White Red Blue Yellow Green High Intensity VAC mA mcd 12,24 20 5600 P x x x x 12,24 20 3500 x P x x x 12,24 20 3000 x x P x x 12,24 20 8000 x x x P x 12,24 20 6000 x x x x P [Ordering Information ELED/T5.5/ Voltage 12 - 12VAC 24 - 24VAC Current Blank - Standard Current LC5 - Low Current 5mA / / Colours H/RD H/GN H/YW WWE H/BE - High Intensity Red High Intensity Green High Intensity Yellow High Intensity Warm White High Intensity Blue Example: ELED/T5.5/24/H/BE - 24VAC, High Intensity Blue Example: ELED/T5.5/12/LC5/H/YW - 12VAC, Low Current 5mA, High Intensity Yellow Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com FILAMENT BULB REPLACEMENTS 62 ELED/T5.5 Series ALL DIMENSIONS IN MM [Technical Information Terminations Telephone Slide Base Max Current Draw 20mA Typical Input Voltage Optional Viewing Angle 120 Typical Mean Time Between Failure 90,000 Hours Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com FILAMENT BULB REPLACEMENTS 63 ODC:SM:40769/1 ELED/BA9s Series BA9 LED Bulb Replacements [Key Characteristics Resilient * IP66 sealed * 100,000 hours mean time between failure Adaptable * Multi-voltage operating range 12V to 60V * Available in a variety of colours * Bi-polar Functional * Minimum strike up voltage 8VDC/VAC * Latest LED technology * Replaces standard BA9 incandescent bulbs These bipolar LEDs have been designed to replace standard BA9 incandescent bulbs in push button switches and panel instrumentation. With advances in LED technology, the required levels of illumination to replace incandescent light sources are now achievable. Oxley have used the latest surface mount LED technology in order to create an even spread of illumination. This, along with the introduction of warm white, ensures `true and even' behind panel illumination and eliminates the Hot Spotting often associated with earlier LEDs. [Specifications AC DC Luminous Intensity Chart COLOURS Voltage Current (mA) 191 12VDC 8.5 340 306 60VDC 17.0 84 178 143 12VAC 8.5 166 313 281 60VAC 17.0 White Warm White Red Yellow Green Blue mcd mcd mcd mcd mcd mcd 1012 884 70 108 235 1792 1502 123 181 784 67 55 1652 1365 111 [Ordering Information ELED/BA9S/ Colours CW WW YW BE GN RD - Example: ELED/BA9S/CW - Cold White Example: ELED/BA9S/GN - Green Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com Cold White Warm White Yellow Blue Green Red FILAMENT REPLACEMENT LEDS 64 ELED/BA9s Series ALL DIMENSIONS IN MM [Technical Information Terminations Bipolar Centre Contact Collar Black Acetal Base Metal Max Current Draw 20mA Typical Input Voltage 12V to 60V AC to DC Viewing Angle 120 Typical Telephone: +44 (0)1229 483226 * sales@oxleygroup.com www.oxleygroup.com FILAMENT REPLACEMENT LEDS 65 ODC:SM:40743/2 LED Lamps LEDPanel Panel Lamps LED Panel Lamps lighting the way Oxley Developments Company Ltd Priory Park Ulverston Cumbria LA12 9QG United Kingdom t: +44 (0) 1229 483226 f: +44 (0) 1229 581851 e: sales@oxleygroup.com Oxley Inc 31 Business Park Drive Branford CT 06405 USA t: +1 (203) 488 1033 f: +1 (203) 481 6971 e: info@oxleygroup.com ODC:SM:40813/2