For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 52
HMC372LP3 / 372LP3E
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
v03.0610
General Description
Features
Functional Diagram
The HMC372LP3 & HMC372LP3E are GaAs PHEMT
MMIC Low Noise Ampli ers that are ideal for GSM
& CDMA cellular basestation front-end receivers
operating between 700 and 1000 MHz. The ampli er
has been optimized to provide 1 dB noise gure, 15
dB gain and +34 dBm output IP3 from a single supply
of +5V @ 100 mA. Input and output return losses are
25 and 14 dB respectively with the LNA requiring only
four external components to optimize the RF Input
match, RF ground and DC bias. For applications
which require improved noise gure, please see the
HMC617LP3(E).
Noise Figure: < 1 dB
Output IP3: +34 dBm
Gain: 15 dB
Very Stable Gain vs. Supply & Temperature
Single Supply: +5V @ 100 mA
50 Ohm Matched Output
Electrical Speci cations, TA = +25° C, Vs = +5V
Typical Applications
The HMC372LP3 / HMC372LP3E is ideal for
basestation receivers:
• GSM, GPRS & EDGE
• CDMA & W-CDMA
• Private Land Mobile Radio
Parameter Min. Typ. Max. Min. Typ. Max. Units
Frequency Range 810 - 960 700 - 1000 MHz
Gain 12.5 14.5 11.5 14.5 dB
Gain Variation Over Temperature 0.008 0.015 0.008 0.015 dB / °C
Noise Figure 1.0 1.3 1.0 1.3 dB
Input Return Loss 25 25 dB
Output Return Loss 14 12 dB
Reverse Isolation 20 22 dB
Output Power for 1dB Compression (P1dB) 18 21 17 20 dBm
Saturated Output Power (Psat) 23.5 22.5 dBm
Output Third Order Intercept (IP3)
(-20 dBm Input Power per tone, 1 MHz tone spacing) 34 30 33 dBm
Supply Current (Idd) 100 100 mA
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 53
10
11
12
13
14
15
16
17
18
19
20
0.7 0.75 0.8 0.85 0.9 0.95 1
+ 4.5 V
+ 5.0 V
+ 5.5 V
GAIN (dB)
FREQUENCY (GHz)
Broadband Gain & Return Loss
Gain vs. Temperature Noise Figure vs. Temperature
Gain, Noise Figure &
Power vs. Supply Voltage @ 850MHz
Gain vs. Vdd Noise Figure vs. Vdd
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
0.7 0.75 0.8 0.85 0.9 0.95 1
+ 25 C
+ 85 C
- 40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
10
11
12
13
14
15
16
17
18
19
20
0.7 0.75 0.8 0.85 0.9 0.95 1
+ 25 C
+ 85 C
- 40 C
GAIN (dB)
FREQUENCY (GHz)
12
13
14
15
16
17
18
19
20
21
22
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
4.5 4.75 5 5.25 5.5
Gain
P1dB
Noise Figure
GAIN (dB) & P1dB (dBm)
NOISE FIGURE (dB)
VOLTAGE SUPPLY (Vdd)
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
0.25 0.5 0.75 1 1.25 1.5 1.75 2
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
0.7 0.75 0.8 0.85 0.9 0.95 1
+ 4.5 V
+ 5.0 V
+ 5.5 V
NOISE FIGURE (dB)
FREQUENCY (GHz)
HMC372LP3 / 372LP3E
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
v03.0610
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 54
Input Return Loss vs. Temperature Output Return Loss vs. Temperature
P1dB & Psat vs. TemperatureOutput IP3 vs. Temperature
Output IP3 vs. Vdd P1dB vs. Vdd
15
16
17
18
19
20
21
22
23
24
25
0.7 0.75 0.8 0.85 0.9 0.95 1
+25 C
+85 C
-40 C
P1dB
PSAT
COMPRESSION POINT (dBm)
FREQUENCY (GHz)
30
31
32
33
34
35
36
37
38
39
40
0.7 0.75 0.8 0.85 0.9 0.95 1
+ 25 C
+ 85 C
- 40 C
OUTPUT IP3 (dBm)
FREQUENCY (GHz)
15
16
17
18
19
20
21
22
23
24
25
0.7 0.75 0.8 0.85 0.9 0.95 1
+ 4.5 V
+ 5.0 V
+ 5.5 V
P1dB (dBm)
FREQUENCY (GHz)
30
31
32
33
34
35
36
37
38
39
40
0.7 0.75 0.8 0.85 0.9 0.95 1
+ 4.5 V
+ 5.0 V
+ 5.5 V
OUTPUT IP3 (dBm)
FREQUENCY (GHz)
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
0.7 0.75 0.8 0.85 0.9 0.95 1
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
-40
-35
-30
-25
-20
-15
-10
-5
0
0.7 0.75 0.8 0.85 0.9 0.95 1
+ 25 C
+ 85 C
- 40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
HMC372LP3 / 372LP3E
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
v03.0610
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 55
Output IP3 vs. Input Power @ 950 MHz Reverse Isolation vs. Temperature
30
31
32
33
34
35
36
37
38
39
40
-20 -15 -10 -5 0
1 MHz Tone Separation
6 MHz Tone Separation
OUTPUT IP3 (dBm)
INPUT POWER PER TONE (dBM)
-30
-25
-20
-15
-10
-5
0
0.7 0.75 0.8 0.85 0.9 0.95 1
+25 C
+85 C
-40 C
ISOLATION (dB)
FREQUENCY (GHz)
HMC372LP3 / 372LP3E
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
v03.0610
Typical Supply Current vs. Vdd
Vdd (Vdc) Idd (mA)
+4.5 98
+5.0 100
+5.5 102
Drain Bias Voltage (Vdd) +8.0 Vdc
RF Input Power (RFIN)(Vs = +5.0 Vdc) +15 dBm
Channel Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 15.6 mW/°C above 85 °C) 1.015 W
Thermal Resistance
(channel to ground paddle) 64.1 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
Absolute Maximum Ratings
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 56
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
HMC372LP3 / 372LP3E
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
v03.0610
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC372LP3 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H372
XXXX
HMC372LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H372
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 57
HMC372LP3 / 372LP3E
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
v03.0610
Pin Number Function Description Interface Schematic
1, 5, 8, 9 N/C No connection necessary.
These pins may be connected to RF/DC ground.
2, 4, 6, 10, 12,
13, 14, 16 GND These pins must be connected to RF/DC ground.
3RF IN This pin is matched to 50 Ohms with a 22 nH
inductor to ground. See Application Circuit.
7, 15
ACG
AC Ground - An external capacitor of 0.01μF to
ground is required for low frequency bypassing.
See Application Circuit for further details.
Vdd Power supply voltage. Choke inductor and bypass
capacitor are required. See application circuit.
11 RF OUT This pin is AC coupled and matched to 50 Ohms.
Pin Descriptions
Application Circuit
Note 1: Choose value of capacitor C1 for low frequency bypassing. A 0.01 μF ±10% capacitor is recommended.
Note 2: L1, L2 and C1 should be located as close to the pins as possible.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 58
Item Description
J1 - J2 PCB Mount SMA RF Connector
J3 - J4 DC Pin
C1 10000 pF Capacitor, 0402 Pkg.
C2 10000 pF Capacitor, 0060 Pkg.
L1 22nH Inductor, 0402 Pkg.
L2 18nH Inductor, 0603 Pkg.
U1 HMC372LP3 / HMC372LP3E Ampli er
PCB [2] 106722 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
List of Materials for Evaluation PCB 106821 [1]
HMC372LP3 / 372LP3E
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
v03.0610
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 59
HMC372LP3 / 372LP3E
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
v03.0610
Notes:
