Table of Contents Page No. Amphe-Lite* Series - Amphenol's Ultimate Commercial Subminiature Connector . . . . . . . . . . 1 Performance Criteria, Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Insert Availability and Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Alternate Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Insert Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 8 Shell Styles AL00 Wall Mounting Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 AL06 Straight Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 AL07 Jam Nut Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Accessories Receptacle Protection Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Plug Protection Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Dummy Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Cable Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Contacts, Sealing Plugs, Plastic Dust Caps . . . . . . . . . . . . . . . . . . . . . . . . . 16 Contacts (Printed Circuit Board, Wire wrap) . . . . . . . . . . . . . . . . . . . . . . . . . 17 Fiber Optic Termini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 - 20 Application Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 How to Order Amphe-Lite Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Amphe-Lite Capabilities (Fiber Optics, Coax Contacts, Flex Terminations, PC Tails) . . . . . . . . . 23 Amphe-Lite Capabilities (Non-Magnetic, Ground Plane Connectors, Twinax & Power Contacts) . . . . 24 Sales Office Listing Please visit our Website at www.amphenol-industrial.com Also visit www.amphenol-aerospace.com. Amphenol Industrial Operations and Amphenol Aerospace are both located at Sidney, NY. Together with other Amphenol divisions worldwide, Amphenol offers one of the broadest ranges of interconnect products in the marketplace. Amphenol Aerospace and Amphenol Industrial Operations operate quality systems that are certified to ISO-9001 and AS-9100 by third party registrars. * Amphe-Lite is a registered trademark of Amphenol Corporation. Amphe-Lite Series Amphenol's ultimate commercial subminiature connector Coupling Nut Quick Coupling Thread Commercial 38999, Series III Type Composite Connectors Ratchet The Amphe-Lite Connector Series is designed for communications equipment manufacturers with signal, power, RF or fiber optic interconnect requirements in harsh environments such as communication towers, outdoor and roof-top applications. This commercial 38999, Series III type composite connector series is ideal for communications equipment, manufacturing process control and medical equipment. The Amphe-Lite offers the highest performance capabilities for severe environment applications, and yet is cost effective enough for general duty and non-environmental applications. The Amphe-Lite is UL Recognized, file E115497. U (R)L RoHS Compliant Product Available Consult Amphenol Industrial Operations. Spring Fingers (EMI) pheno l Am HS Ro Designed for Performance C E U E /2 002 / 95 / Features and Benefits of the Amphe-Lite Series: * * * * * * * Anti-Decoupling Device Plug Shell Service Class F Amphe-Lite connectors provide excellent EMI shielding and grounding through electroless nickel plating and spring grounding rings. Environmental sealing is ensured with interfacial seals to prevent contact corrosion. Composite shells are completely immune to corrosion problems. Service Class U provides a non-conductive shell when EMI shielding is not a criteria. Class F Composite shells resist severe corrosion, and provide plating endurance from salt spray exposure for a minimum of 2000 hours. Completely mates in one 360-degree turn of the coupling nut to provide the fastest and easiest equipment assembly and maintenance possible. Acme threads provide coupling durability. Thicker wall sections and a greater coupling surface area improve strength and shock resistance. Blunting of the thread on both the coupling nut and receptacle eliminates cross coupling. Recessed pins minimize potential contact damage in this 100% scoopproof connector. In a blind mating application, mating shells cannot "scoop" the pins and cause a shorting or bending of contacts. A rigid dielectric insert with excellent electrical characteristics provides durable protection to the contacts. The socket contacts are probe proof, and all contacts are rear insertable and rear removable. Available in sizes 10 power, 12, 16, 20 and 22D contacts are plated in the standard 50 micro inches minimum gold, with 100 micro inches as an option. Numerous advantages in performance capability are designed into the Amphenol(R) Amphe-Lite Connector. A positive shoulder to shoulder coupling design, grounding fingers, and electroless nickel plating provide superior EMI shielding capability of 65 dB minimum at 10 GHz. Amphe-Lite Shell Styles wall mount receptacle straight plug Optional Features: * * * Conductive and non-conductive options are available. See pg. 22. Amphe-Lite connectors allow for use of many contact types: fiber optics, shielded coaxial, twinax ground plane versions, and power contacts. (See pages 23, 24). Consult Amphenol Industrial for more information on combinations of different types of contacts in one connector shell - what Amphenol calls their new "Combo-C" inserts. Non-magnetic Amphe-Lite is a new variation - Amphenol offers one of the few 100% non-magnetic connectors with high contact density available today. See page 24. 1 jam nut receptacle Amphe-Lite Series performance criteria, specifications Amphenol(R) Amphe-Lite connectors provide EMI shielding capability which exceeds MIL-DTL38999 Series III requirements. The Amphe-Lite connector with EMI grounding fingers and conductive finishes has proven to be the ultimate in EMI shielding effectiveness. The charts at right illustrate shielding effectiveness data which is typical of connectors tested with the nickel finish over a wide frequency range. These capabilities along with a 125C temperature rating and superior moisture sealing protection provide the user with a connector that can withstand the most rigorous application. UL RTI rating is 105C. EMI Shielding Effectivess dB Testing by Triaxial Method dB 140 120 100 Shielding Effectiveness Amphe-Lite Connectors (Nickel Finish at -55C to +125 C) 80 60 40 20 0 100 CONTACT RATING Test Current TYPICAL SHIELDING EFFECTIVENESS TEST DATA Contact Size Crimp Hermetic Maximum Millivolt Drop Crimp* 22D 5 3 73 20 7.5 5 55 dB 16 13 10 49 140 12 23 17 42 10 (Power) 33 NA 33 * When using silver plated wire. 200 300 400 500 600 FREQUENCY MEGAHERTZ 700 800 TYPICAL SHIELDING EFFECTIVENESS TEST DATA EMI Shielding Effectivess dB Testing by Mode Stirring Method 120 100 Crimp Well Data Nominal Well Depth 80 .0345 .0010 .141 60 .047 .001 .209 16 .067 .001 .209 12 .100 .002 .209 10 (Power) .137 .002 .355 Contact Size Well Diameter 22D 20 SERVICE RATING Suggested Operating Voltage (Sea Level) Shielding Effectiveness Amphe-Lite Connectors (Nickel Finish at -55C to +125 C) 40 20 0 1 Service Rating AC (RMS) DC Test Voltage (Sea Level) M 400 550 1300 VRMS 2 3 4 5 6 7 FREQUENCY GIGAHERTZ 8 9 Test data beyond 2GHz is subject to equipment variation. N 300 450 1000 VRMS FINISH DATA I 600 850 1800 VRMS II 900 1250 2300 VRMS Amphe-lite connectors are available in the following finishes: * Conductive Electroless Nickel Plated Composite (Service Class F) * Black Composite, unplated (Service Class U) See how to order page 22. ** Please note that the establishment of electrical factors is left entirely in the designers hands, since he is in the best position to know what voltage, switching surges, transients, etc. can be expected in a particular circuit. 10 2 Amphe-Lite Series insert availability and identification Shell Size/Arrg. Service Rating Contact Size Total Contacts 22D 9-35 9-94 9-98 11-2 11-5 11-35 11-98 11-99 13-4 13-8 13-13 13-35 13-98 15-5 15-15 15-18 15-19 15-35 15-97 15-AC 17-2 17-6 17-8 17-22 17-26 17-31 17-35 17-99 19-11 19-31 19-32 19-35 21-11 21-16 21-35 21-39 21-41 21-75 23-6 23-21 23-35 23-53 23-54 23-55 25-4 25-7 25-8 25-11 25-17 25-19 25-20 25-24 25-26 25-29 25-35 25-37 25-43 25-46 25-61 * M M I I I M I I I I I, Fiber Optic M I II I I I M I M M I II NA I M M I II M I M I II M I I M M II M I M I I NA NA N M I N I I I M I I I I 6 2 3 2 5 13 6 7 4 8 4 22 10 5 15 18 19 37 12 26 39 6 8 4 26 19 55 23 11 15 32 66 11 16 79 39 41 4 6 21 100 53 53 55 56 99 8 11 42 19 30 24 25 29 128 37 43 46 61 20 16 12 12 (Coax) 10 (Power) 8 (Coax) 8 (Twinax) 6 2 3 2 5 13 6 7 4 8 2* 2 22 10 14 18 19 5 1 37 8 24 38 4 2 1 6 8 2 4 55 26 11 21 2 4 2 11 12 1 2 32 66 11 16 79 37 41 2 (See Note) 6 21 100 53 40 9 55 48 4 8 97 2 8 2 9 36 6 19 10 13* 12 4 12 5 16 3 4 29 128 23 40 61 Ground plane proprietary option available. Arrg. 9-5 is exclusively ground plane type. See page 24 for further information of ground plane connectors. T i 16 t t d di t d t fib ti C lt Sid NY 37 20 4 2 3 For RG180/U and RG195/U cables only. (Contact Sidney, NY for other cable application). Size 8 Coax and Twinax are interchangeable. Amphe-Lite Series alternate insert positioning A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The angles for a given connector are the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. MASTER KEY/KEYWAY POSITION Key & keyway arrangement identification letter AR or AP BSC BR or BP BSC CR or CP BSC DR or DP BSC N A B C D E 105 102 80 35 64 91 140 132 118 140 155 131 215 248 230 205 234 197 265 320 312 275 304 240 11, 13, and 15 N A B C D E 95 113 90 53 119 51 141 156 145 156 146 141 208 182 195 220 176 184 236 292 252 255 298 242 17 and 19 N A B C D E 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 N A B C D E 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 Shell Size 9 21, 23, and 25 MAIN KEYWAY RECEPTACLE (front face shown) AR BSC BR BSC DR BSC CR BSC MAIN KEYWAY PLUG (front face shown) AP BSC BP BSC CP BSC 4 DP BSC Amphe-Lite Series insert arrangements front face of pin inserts illustrated 5 1 46 2 3 Insert Arrangement CA B D B B A C E F B A A B D B D D C M M I I I M I I I 6 2 3 2 5 13 6 7 4 22D 20 20 16 20 22D 20 20 16 A B B F 1 21 22 H E G C D Insert Arrangement 13-8 13-13 13-35 Service Rating I I, Fiber Optic Number of Contacts 8 Contact Size 20 B K F D 11-99 B J C J E E P H D D C 13-98 15-5 13-4 L A M B C R N K A A H 11-98 C Number of Contact C 11-35 C Service Rating A 11-5 F G A E 9-94 G 11-2 B 9-35 Contact Size 9-98 10 1 9 11 2 3 8 13 12 4 7 6 5 A E A L J D F 15-15 C S R H G E G A M N B T U P K D F E 15-18 M I II 2 2 22 10 5 14 I 1 18 I 16 12 22D 20 16 20 16 20 Dedicated to Fiber Optics 1 A M L N K U J 1 P V J F C H M G E D 11 10 E F 26 20 21 B 17 4 19 5 25 9 E 3 18 22 A 2 17 14 13 24 12 23 B L 1 16 15 A 21 D S G 31 C R T H K B 6 F D 6 7 C 30 8 11 Insert Arrangement 15-19 Service Rating 15-35 15-97 15-AC I M Number of Contacts 19 37 8 4 24 2 38 Contact Size 20 22D 20 16 22D 16 22D A G I 17-2 A B B D N H F Insert Arrangement C V C K D V c E W X G F K J M A L B U b Y L D A T Z M C E R Pa S M J M U 10 B R H 1 6 8 Twinax 12 17 32 25 47 D 3 9 E F 16 31 24 39 17-22 17-26 17-31 17-35 II Coax I M M Number of Contacts 8 Contact Size 16 12 Coax 8 Coax D V W K J G 17-99 I 4 11 4 55 21 2 20 22D 20 16 22D 20 16 8 10 E F H 26 CONTACT LEGEND 5 L 46 UC Z X M 55 52 B T S Y N C 17-8 2 P 53 Service Rating 2 A R 40 1 S G I 4 N P T H 17-6 12 16 20 22D Amphe-Lite Series insert arrangements front face of pin inserts illustrated V A J H U B K G S C B L D S E N K R M b Y a J L K Z 25 34 17 43 E A J 51 58 H 64 B K 2 X h 10 1 D W g M E f 4 C V j c N F Insert Arrangement d P B U e R g h C A T A f W G F 9 16 G H 24 50 33 42 F D 57 E 19-11 19-31 19-32 19-35 II M I M I Service Rating 21-11 Number of Contacts 11 2 1 12 32 66 11 Contact Size 16 8 Coax 12 22D 20 22D 12 1 L M K H F 71 61 D r P 41 q e L R c d p G K p c f d e N H J M L 21-16 21-35 21-39 21-41 II M I I 16 79 37 2 41 Contact Size 16 22D 20 16 20 N A B E D A A M F 8 P B W X 25 35 46 56 2 3 C 67 77 86 94 95 96 97 98 99 100 4 5 C V K B C D S J 6 D 7 T U E H 15 F G Insert Arrangement 23-21 24 34 45 55 66 21-75 23-6 Service Rating M M II M Number of Contacts 4 6 21 100 8 Coax 8 Twinax 16 22D Contact Size G H 1 R L 16 F b J K Number of Contacts E a n q P D Z m t r g F C Y k s h B X j i S E b M 11 a n f T D Z m g N E Y k R U A W V B C X i h 79 21 P G A j S C R Service Rating T N J Insert Arrangement 31 51 B S W V U A C L 66 63 3 76 85 93 23-35 Note: Size 8 cavities can be supplied with either twinax or coax per customer requirement. CONTACT LEGEND 6 8 10 12 16 20 22D Amphe-Lite Series insert arrangements front face of pin inserts illustrated S R P m k N z M h y g L x V C W D BB q r X E CC s HH Y F DD t EE u Z v a b G c H AA FF w K e d J Insert Arrangement 24 23 22 21 44 20 43 52 42 19 41 51 40 39 50 18 38 37 17 36 16 15 14 13 B U p GG f A T n 1 25 2 26 3 27 4 46 5 28 6 29 47 30 45 53 23-54 M N 9 4 55 Contact Size 20 22D 16 12 20 A FF t W EE s V U CC q T p h H 68 C F 82 D 76 53 99 93 15 84 21 28 E 78 25-4 Service Rating 60 42 26 K L 33 19 H J N M G G 81 67 59 41 B 94 75 6 m P 32 H J 85 74 25 g BB k R Insert Arrangement f AA n S z 18 F e JJ E s a DD F t b u c G d A 79 24 1 E 72 46 7 d y KK DD r D c HH 64 16 x LL 29 22 C b GG u X B a w 25-7 I 25-8 NA NA Number of Contacts 48 8 97 2 8 Contact Size 20 16 22D 8 Twinax 8 Twinax U A A b S Z L K D F n m N M E Service Rating Number of Contacts Contact Size v u t k L D e E f K F h N U P V C R D J T S E G H X G F H J K 25-11 25-17 N M 25-19 I 2 9 36 6 19 20 10 Power 22D 8 Twinax 12 CONTACT LEGEND 7 B W g Y L Insert Arrangement s w p P r A V d c q R C M C a J G B T B H D r Z CC I 40 Z Y q 23-55 53 v C X AA z GG BB HH y FF i EE x w h v g f e M L K j P B W p Number of Contacts Y A k R 48 31 7 32 8 33 34 9 10 35 12 11 I V n S m 49 23-53 Service Rating U T 8 10 12 16 20 22D Amphe-Lite Series insert arrangements front face of pin inserts illustrated A S R N 1 U 11 Z 3 X 2 a L W 4 15 22 5 16 F 6 8 H 7 25-20 25-24 N I Service Rating 9 G J J Insert Arrangement 21 24 17 23 E U V K H 14 20 25 10 G K 3 19 T X V W L 18 D M F 2 13 C S Y E 6 7 M 12 R N D T 5 4 Y B P C Z P 1 A B 25-26 I Number of Contacts 10 13 3 4 12 12 16 5 4 Contact Size 20 16 8 Twinax 12 Coax 16 12 20 12 8 Coax (Locations U and Y - Dedicated to Fiber Optics) A 25 B R S 36 48 59 71 82 U 94 105 115 8 15 b N f a M e 4 D V d Y X J H m p F 14 24 35 47 58 70 81 N 114 104 J 25-35 M I Number of Contacts 29 128 37 Contact Size 16 22D 16 W A Y B Z n V c d u S f a D N d y x k K g h M f K L e DD p S n R H P J PP EE MM q T G w CC m N x y KK f F g G z BB AA h i J k j M L 25-46 25-61 I I I Number of Contacts 23 20 40 4 2 61 Contact Size 20 16 20 16 8 Coax 20 D e E LL 25-43 Service Rating d JJ NN C c GG HH FF B b v u X t r U F c m L M w n P W s V b E z R J P Insert Arrangement Z S p G H e N v AA C q s t g R Y A Z a Y r x v h T B X u r T F q w k t s U E b m U V D a 25-37 A W C p H L I X G K M 25-29 Service Rating F Z a b 93 E Y n c G Insert Arrangement X r 7 128 121 D k R P E W K q d Z L C W h e 125 B V f U c g S C P A T 1 T H K Coax contacts for RG180 or RG195 cable. CONTACT LEGEND 8 8 10 12 16 20 22D Amphe-Lite Series AL00 wall mounting receptacle, composite S 2 PLACES AL00F ( AL00FD ( AL00U ( AL00UD ( LL R1 2 PLACES )* )* )* )* VIEW D FOR SIZE 8 COAXIAL ONLY, RELATIVE TO -A- M R2 2 PLACES B THREAD L AA V THREAD D T 4 PLACES .005 M TT 4 PLACES .909 MAX 23.09 MAX VIEW D FOR SIZE 8 TWINAX ONLY, RELATIVE TO -A- Z -A- .13 M 1.240 MAX 31.50 MAX 1.084 MAX 27.53 MAX * To complete order number, see page 22. Inches Shell Size B Thread Class 2A 0.1P-0.3L-TS (Plated) L Max. M +.000 -.005 R1 R2 S Max. T +.008 -.006 9 11 13 15 17 19 21 23 25 .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 .514 .514 .514 .514 .514 .514 .545 .545 .545 .775 .775 .775 .775 .775 .775 .745 .745 .745 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 .948 1.043 1.137 1.232 1.323 1.449 1.575 1.701 1.823 .128 .128 .128 .128 .128 .128 .128 .154 .154 Z Max. AA Max. Panel Thickness LL .005 TT +.008 -.006 .198 .198 .198 .198 .198 .198 .228 .228 .228 .234 .234 .234 .234 .234 .234 .204 .204 .204 .913 .913 .913 .913 .913 .913 .911 .911 .911 .216 .194 .194 .173 .194 .194 .194 .242 .242 Millimeters Shell Size L Max. M +.00 -.13 9 11 13 15 17 19 21 23 25 13.06 13.06 13.06 13.06 13.06 13.06 13.84 13.84 13.84 19.69 19.69 19.69 19.69 19.69 19.69 18.92 18.92 18.92 R1 R2 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 S Max T +.20 -.13 V Thread Metric Z Max. AA Max. LL .13 TT +.20 -.13 24.1 26.5 28.9 31.3 33.7 36.9 40.1 43.3 46.4 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 3.91 M12X1-6g M15X1-6g M18X1-6g M22X1-6g M25X1-6g M28X1-6g M31X1-6g M34X1-6g M37X1-6g 5.03 5.03 5.03 5.03 5.03 5.03 5.79 5.79 5.79 5.94 5.94 5.94 5.94 5.94 5.94 5.18 5.18 5.18 23.19 23.19 23.19 23.19 23.19 23.19 23.14 23.14 23.14 5.49 4.93 4.93 4.39 4.93 4.93 4.93 6.15 6.15 All dimensions for reference only Designates true position dimensioning 9 Amphe-Lite Series AL06 straight plug, composite VIEW D FOR SIZE 8 COAXIAL ONLY, RELATIVE TO -A- AL06F ( AL06FD ( AL06U ( AL06UD ( 1.234 MAX 31.34 MAX )* )* )* )* 1.656 MAX 42.06 MAX B THREAD Q D V THREAD .359 MAX 9.12 MAX VIEW D FOR SIZE 8 TWINAX ONLY, RELATIVE TO -A- .591 +.003 -.000 15.01 +.08 -.00 1.797 MAX 45.64 MAX -A- * To complete order number see page 22. Inches Millimeters Shell Size B Thread 0.1P-0.3L-TS-2B (Plated) Q Dia. Max. Shell Size Q Max. V Thread Metric 9 11 13 15 17 19 21 23 25 .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 .858 .984 1.157 1.279 1.405 1.515 1.641 1.767 1.889 9 11 13 15 17 19 21 23 25 21.8 25.0 29.4 32.5 35.7 38.5 41.7 44.9 48.0 M12X1-6g M15X1-6g M18X1-6g M22X1-6g M25X1-6g M28X1-6g M31X1-6g M34X1-6g M37X1-6g All dimensions for reference only. 10 Amphe-Lite Series AL07 jam nut receptacle, composite C PANEL THICKNESS .062 MIN .125 MAX 1.57 MIN 3.18 MAX T* AL07F ( AL07FD ( AL07U ( AL07UD ( )* )* )* )* .378 MAX 9.60 MAX D VIEW D FOR SIZE 8 COAXIAL ONLY, RELATIVE TO -A- .794 MAX 20.17 MAX A* V THREAD B THREAD VIEW D FOR SIZE 8 TWINAX ONLY, RELATIVE TO -A- .091 MAX 2.31 MAX H -A- K REF SHELL SIZES 9/11 - .871 22.12 SHELL SIZES 13/25 - .878 22.30 1.280 MAX 32.51 MAX S 2 PLACES .940 MAX 23.88 MAX * To complete order number see page 22. Inches Shell Size 9 11 13 15 17 19 21 23 25 A* +.000 -.010 .669 .769 .955 1.084 1.208 1.333 1.459 1.575 1.709 B Thread Class 2A 0.1P-0.3L-TS (Plated) .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 C Max. H Hex +.017 -.016 S .010 T* +.010 -.000 1.199 1.386 1.511 1.636 1.761 1.949 2.073 2.199 2.323 .875 1.062 1.250 1.375 1.438 1.562 1.688 1.812 2.000 1.062 1.250 1.375 1.500 1.625 1.812 1.938 2.062 2.188 .697 .822 1.007 1.134 1.259 1.384 1.507 1.634 1.759 Millimeters Shell Size 9 11 13 15 17 19 21 23 25 A* +.00 -.25 16.99 19.53 24.26 27.53 30.68 33.86 37.06 40.01 43.41 C Max. 30.45 35.20 38.38 41.55 44.73 49.50 52.65 55.85 59.00 H Hex +.43 -.41 22.23 25.40 30.18 33.32 36.53 39.67 42.80 46.02 50.80 S .25 26.97 31.75 34.93 38.10 41.28 46.02 49.23 52.37 55.58 * All dimensions for reference only. 11 T* +.25 -.00 17.70 20.88 25.58 28.80 31.98 35.15 38.28 41.50 44.68 V Thread Metric M12X1-6g M15X1-6g M18X1-6g M22X1-6g M25X1-6g M28X1-6g M31X1-6g M34X1-6g M37X1-6g D shaped panel cut-out dimensions to prevent connector from turning Amphe-Lite - accessories receptacle protection cap .578 MAX 14.68 MAX A B with nylon braid .578 MAX 14.68 MAX A *10-630907-( ) B .578 MAX 14.68 MAX A D *10-630908-( ) 6.000 APPROX 152.10 APPROX *10-630912-( ) *10-630909-( ) B 3.500 APPROX 88.90 APPROX with nylon braid and metal ring attached * To complete order number, add shell size and suffix number. For example, shell size 11: 10-630912-011. Inches Shell Size 9 11 13 15 17 19 21 23 25 A Thread Class 2B 0.1P-0.3L-TS .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 B Dia. Max. .875 1.000 1.125 1.250 1.438 1.500 1.625 1.750 1.875 D Dia. +.010 -.000 .703 .844 1.016 1.141 1.266 1.391 1.516 1.641 1.766 Millimeters Finish Black composite, unplated 10-No Suffix -( Shell Size 9 11 13 15 17 19 21 23 25 ) All dimensions for reference only. 12 B Dia. Max. 22.23 25.40 28.58 31.75 36.53 38.10 41.28 44.45 47.63 D Dia +.25 -.00 17.86 21.44 25.81 28.98 32.16 35.33 38.51 41.68 44.86 Amphe-Lite - accessories plug protection cap B *10-630910-( ) 1.166 MAX 29.62 MAX N with nylon braid B *10-630911-( ) D 1.166 MAX 29.62 MAX N with nylon braid and metal ring attached * To complete order number, add shell size and suffix number. For example, shell size 11 with electroless nickel, 10-630910-11F Inches Shell Size 9 11 13 15 17 19 21 23 25 A Thread Class 2A 0.1P-0.3L-TS .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 D +.030 -.000 .516 .641 .766 .891 1.016 1.141 1.266 1.343 1.516 N Dia. Max. .895 1.000 1.171 1.299 1.436 1.543 1.670 1.787 1.914 Millimeters Finish 10-No Suffix Electroless nickel -( Black composite, unplated -0( Shell Size 9 11 13 15 17 19 21 23 25 )F ) All dimensions for reference only. 13 D +.25 -.00 13.11 16.28 19.46 22.63 25.81 28.98 32.16 34.11 38.51 N Dia. Max. 22.73 25.40 29.74 32.99 36.47 39.19 42.42 45.39 48.62 Amphe-Lite - accessories dummy receptacle S 2 PLACES R1 2 PLACES M W R2 B THREAD 2 PLACES AA *10-630913-( ) TT 4 PLACES T 4 PLACES .005 M .13 M * To complete order number, add shell size and suffix number. For example, shell size 11 with electroless nickel,10-630913-11F. Inches Finish Electroless nickel Black composite, unplated 10-No Suffix -( )F -0( ) Shell Size B Thread Class 2A 0.1P-0.3L-TS (Plated) M +.020 -.000 R1 R2 S .010 T +.008 -.006 9 11 13 15 17 19 21 23 25 .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 .822 .822 .822 .822 .822 .822 .791 .791 .791 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.500 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 .938 1.031 1.125 1.219 1.312 1.438 1.562 1.688 1.812 .128 .128 .128 .128 .128 .128 .128 .154 .154 W .010 AA Max. Panel Thickness TT +.008 -.006 .098 .098 .098 .098 .098 .098 .125 .125 .125 .234 .234 .234 .234 .234 .234 .204 .204 .204 .216 .194 .194 .173 .194 .194 1.94 .242 .242 Millimeters Shell Size 9 11 13 15 17 19 21 23 25 M +.51 -.00 20.88 20.88 20.88 20.88 20.88 20.88 20.09 20.09 20.09 R1 R2 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 All dimensions for reference only. S .25 23.83 26.19 28.58 30.96 33.32 36.53 39.67 42.88 46.02 T +.20 -.15 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 3.91 W .25 2.49 2.49 2.49 2.49 2.49 2.49 3.18 3.18 3.18 AA Max. 5.94 5.94 5.94 5.94 5.94 5.94 5.18 5.18 5.18 TT +.20 -.15 5.49 4.93 4.93 4.39 4.93 4.93 4.93 6.15 6.15 Designates true position dimensioning 14 Amphe-Lite - accessories cable clamps L STRAIGHT STYLE *10-630934-XXX KK FF V THREAD F1 F2 .270 +.010 -.020 6.86 +.25 -.51 U KK V THREAD 90 DEGREE ELBOW STYLE *10-630935-XXX LL F1 F2 .270 +.010 -.020 6.86 +.25 -.51 VIEW AT A FF * To complete order number, add shell size and suffix number. For example, shell size 11 with electroless nickel, 10-630934-11F. Inches Finish Electroless nickel 10-No Suffix -( )F Shell Size F1 Min. Dia. Cable F2 Max. Dia. Cable L Max. U Max. FF Dia. Max. KK Dia. Max. LL Max. 9 11 13 15 17 19 21 23 25 .094 .141 .172 .203 .234 .265 .297 .328 .359 .203 .250 .323 .422 .500 .562 .625 .703 .765 1.431 1.431 1.431 1.431 1.431 1.431 1.492 1.492 1.492 .656 .688 .750 .859 .937 1.000 1.062 1.141 1.203 .347 .394 .467 .566 .644 .706 .769 .847 .909 .629 .756 .883 1.011 1.138 1.265 1.393 1.488 1.616 1.015 1.062 1.125 1.328 1.392 1.453 1.609 1.656 1.719 Shell Size 9 11 13 15 17 19 21 23 25 F1 Min. Dia. Cable 2.39 3.58 4.37 5.16 5.94 6.73 7.54 8.33 9.12 F2 Max. Dia. Cable 5.16 6.35 8.20 10.72 12.70 14.27 15.88 17.86 19.43 Millimeters All dimensions for reference only. 15 L Max. 36.35 36.35 36.35 36.35 36.35 36.35 37.90 37.90 37.90 U Max. 16.66 17.48 19.05 21.82 23.80 25.40 26.97 28.98 30.56 FF Dia. Max. 8.81 10.01 11.86 14.38 16.36 17.93 19.53 21.51 23.09 KK Dia. Max. 15.98 19.20 22.43 25.68 28.91 32.13 35.38 37.80 41.05 LL Max. 25.78 26.97 28.58 33.73 35.36 36.91 40.87 42.06 43.66 Amphe-Lite Series contacts, sealing plugs, plastic dust caps STANDARD CONTACTS FOR AMPHE-LITE SERIES Contact Size Pin Part Number Socket Part Number 8 (Coax) 21-33102-21 21-33101-21 8 (Twinax) 21-33190-529 21-33191-530 10 (Power) 10-597448-105 10-597449-105 12 10-597448-125 10-597449-125 16 10-597448-165 10-597449-165 20 10-597448-205 10-597449-205 22D 10-597448-725 10-597449-452 Above part numbers include standard 500 cycle finish designation gold plating over suitable underplate in accordance with MIL-C39029. For other contact options available for use in Amphe-Lite connectors, (thermocouple) consult Sidney, NY. PLASTIC DUST CAPS Shell Size Plug Receptacle 9 10-70506-14 10-70500-10 11 10-70506-16 10-70500-12 13 10-70500-18 10-70500-14 15 10-70500-20 10-70500-16 17 10-70500-22 10-70500-19 19 10-70500-24 10-70500-20 21 10-70524-1 10-70500-22 23 10-70506-28 10-70500-24 25 10-70500-28 10-70524-1 For protection caps see pages 12 and 13. SEALING PLUGS Contact Size Proprietary No. 8 (Coax) 10-482099-8 8 (Twinax) T3-4008-59P 10 (Power) 10-576225 12 10-405996-121 16 10-405996-161 20 10-405996-201 22D 10-405996-221 16 Amphe-Lite Series contacts - printed circuit board, wire wrap SOCKETS PCB Socket Contacts Size Tail Dia 10-497623-15 22D .019 10-497623-25 22D .019 10-497623-35 22D .019 10-497623-45 22D .019 10-497623-75 22D .019 10-497623-105 22D .019 10-497623-145 22D .019 10-497623-155 22D .019 10-497643-15 20 .019 10-497643-25 20 .019 10-497643-35 20 .019 10-497643-45 20 .019 10-497650-15 16 .040 Wire Wrap Contacts 10-497577-15 22D Tail Square .025 10-497577-25 22D .025 10-497577-35 22D .025 10-497577-55 22D .025 10-497621-15 20 .025 10-497621-25 20 .025 10-497621-35 20 .025 PINS Contact Stickout Max/Min (See Illustration below) AL00 AL06 AL07 .291 .226 .868 .803 .348 .283 .208 .143 .146 .081 .028 NS .609 .539 .423 .358 .348 .294 .213 .159 .555 .501 .138 .084 .255 .201 .316 .251 .893 .828 .373 .308 .233 .168 .171 .106 .053 .000 .634 .564 .448 .383 .373 .319 .238 .184 .580 .526 .163 .109 .280 .226 .242 .182 .819 .759 .299 .239 .159 .099 .097 .037 .021 NS .560 .495 .374 .314 .299 .250 .164 .115 .506 .457 .089 .040 .206 .157 .155 .090 .002 NS .201 .136 .566 .501 .151 .101 .605 .555 .308 .258 .180 .115 .027 NS .226 .161 .591 .526 .176 .126 .630 .580 .333 .283 PCB Pin Contacts .106 .046 NS NS .152 .092 .517 .457 .102 .057 .556 .511 .259 .214 Items highlighted are most popular and most readily available. All dimensions for reference only. Consult Sidney, NY for specific contact contour stickout data. NS designates No Stickout. CONTACT STICK OUT See also catalog 12-170, Amphenol Cylindrical Connectors for PCB Applications. This catalog provides the most commonly used insert pattern pin-out drawings which have been tooled for the purpose of attaching cylindrical connectors to printed circuit boards. Size Tail Dia 10-407552-15 22M .019 10-407552-55 22M .019 10-407552-85 22M .019 10-407552-95 22M .019 10-407552-115 22M .019 10-497640-15 20 .019 10-497640-25 20 .019 10-497640-45 20 .019 10-497640-65 20 .019 10-497596-15 20 .025 10-497596-25 20 .025 10-497596-35 20 .025 10-497596-55 20 .025 10-497695-15 16 .040 10-497630-25 16 .062 10-497630-35 16 .062 10-497630-45 16 .062 10-597502-15 12 .081 Wire Wrap Contacts 10-407572-15 22D Tail Square .025 10-407572-35 22D .025 10-407572-45 22D .025 10-407572-75 22D .025 10-407584-25 20 .025 10-407584-35 20 .025 Contact Stickout Max/Min (See Illustration below) AL00 AL06 AL07 .335 .280 .224 .169 .060 .010 NS .360 .305 .249 .194 .085 .035 NS .286 .236 .175 .125 .011 NS NS .002 NS .348 .298 .213 .163 NS .023 NS .373 .323 .238 .188 NS NS .299 .254 .164 .119 NS .138 .088 .058 .012 .148 .102 .229 .183 .346 .300 .255 .205 .348 .298 .060 .010 .108 .062 .228 .178 .163 .113 .083 .037 .173 .127 .254 .208 .371 .325 .280 .230 .373 .323 .085 .035 .133 .087 .252 .203 .089 .044 .009 NS .099 .058 .180 .139 .297 .256 .206 .161 .299 .254 .011 NS .059 .018 .179 .134 .014 NS .155 .105 .255 .205 .521 .475 .605 .559 .308 .262 .498 .007 .180 .130 .280 .230 .546 .500 .630 .584 .333 .287 NS NS .106 .061 .206 .161 .472 .431 .556 .515 .259 .218 PCB socket and pin part numbers include finish designation - gold plating over suitable underplate in accordance with MIL-C-39029. For other finish variations, consult Sidney, NY. Note: 22M and 22D contacts are interchangeable. For other contact options available for use in Amphe-Lite connectors (thermocouple, fiber optic), consult Sidney, NY. 17 Amphe-Lite Series fiber optic termini - multi-mode, size 16 Amphenol(R) Multi-mode, Size 16 Termini Features and Performance Levels: * * * * * Ceramic alignment ferrule which precisely positions the fiber within the termini Phosphor bronze alignment sleeve, assembled on the socket after polishing insures accurate fiber to fiber alignment (a ceramic alignment sleeve is also available). Typical insertion loss for 100/140 fiber with .2 NA at 820 nm is .5 to .7 dB using Air Gap (AG) polish technique Use of the ceramic ferrule and sleeve maximizes the ability to hold extremely tight dimensional tolerances while maintaining accurate concentricity, thus providing superior and consistent optical loss performance. Termination accomplished using the industry proven epoxy/ polish method. Can be polished Air Gap (AG) or Physical contact (PC). Socket cleaning optional. Consult Amphenol, Sidney, NY for termini cleaning tool. For application tools consult Sidney, NY. Size 16 Multi-mode Pin Terminus .102 .001 DIA .0625 Size 16 Multi-mode Socket Terminus SOCKET SPRING STAINLESS STEEL BODY PHOSPHOR BRONZE ALIGNMENT SLEEVE CERAMIC FERRULE CERAMIC FERRULE STAINLESS STEEL BODY PIN Multi-mode Size 16 Fiber Optic Termini 1.176 MAX* A DIA REF .080 MAX CABLE DIA CERAMIC FERRULE +.0000 DIA -.0002 .297 +.003 -.002 STRENGTH MEMBER SHRINK TUBE 1.500 MAX* 1.093 .020 .080 MAX CABLE DIA .040 MAX BUFFER CABLE DIA .162 .004 SHRINK TUBE STRENGTH MEMBER .102 .001 DIA CERAMIC FERRULE Amphenol(R) Multi-Channel fiber optic connectors are supplied less contacts. Order multi-mode termini by Amphenol part number designation as shown in the chart below. Consult Amphenol, Sidney, NY for further availability. Ordering Information Multi-mode Termini (Size 16) for Amphe-Lite Connectors Fiber Size Core/Cladding Dia (Microns) 50/125 62.5/125 100/140 100/140/172 100/140/172 200/230 200/240 200/280 200/300 .040 MAX BUFFER CABLE DIA A Dia Ref Size 16 Socket Size 16 Pin Inches Microns CF-198035-010 CF-198036-010 .0050 127 CF-198035-017 CF-198035-029 CF-198035-29A CF-198035-053 CF-198035-057 CF-198035-074 CF-198035-080 CF-198036-017 CF-198036-029 CF-198036-29A CF-198036-053 CF-198036-057 CF-198036-074 CF-198036-080 .0057 .0069 .0068 .0093 .0097 .0114 .0120 145 175 173.5 236 245 290 305 Additional sizes available upon request: consult Amphenol, Sidney, NY for availability. Power contacts can be purchased separately, contact Amphenol, Sidney, NY. 18 .06240 DIA +.00002 -.00002 A DIA REF ALIGNMENT SLEEVE** .267 .003 * Indicated dimension when fully assembled. Amphe-Lite Series fiber optic termini - multi-mode, size 20 Amphenol(R) Multi-mode, Size 20 Termini Features and Performance Levels: * * * * * * * * Designed for use in size 20 cavities of Amphe-Lite connectors Designed with similar high performance components as the proven size 16 termini Comparable performance and reliability to the size 16 termini can be expected Offers increased termini density in Amphenol Amphe-Lite connectors Maintains fiber optic/electrical hybrid capabilities Allows for multiple fiber accommodations Termination accomplished using the industry proven epoxy/ polish method. Can be polished Air Gap (AG) or Physical contact (PC). Socket cleaning optional. Consult Amphenol, Sidney, NY for termini cleaning tool. For application tools consult Sidney, NY. SOCKET SPRING STAINLESS STEEL BODY PHOSPHOR BRONZE ALIGNMENT SLEEVE CERAMIC FERRULE CERAMIC FERRULE PIN STAINLESS STEEL BODY Multi-mode Size 20 Fiber Optic Termini Size 20 Multi-mode Pin Terminus .069 .001 DIA .03937 1.176 MAX* A DIA REF +.00012 DIA -.00000 Size 20 Multi-mode Socket Terminus .297 +.003 -.002 STRENGTH MEMBER 1.500 MAX* .037 MAX BUFFER CABLE DIA .03937 STRENGTH MEMBER .162 .002 .069 .001 DIA SHRINK TUBE CERAMIC FERRULE Ordering Information Multi-mode Termini (Size 20) for Amphe-Lite Connectors 50/125 62.5/125 100/140 A Dia Ref Size 20 Socket Size 20 Pin Inches Microns CF-198080-010 CF-198081-010 0.0050 127 CF-198080-017 CF-198081-017 0.0057 145 Additional sizes available upon request: consult Sidney, NY for availability. Power contacts can be purchased separately, contact Sidney, NY. 19 A DIA REF +.00012 DIA -.00000 ALIGNMENT SLEEVE** .263 .004 * Indicated dimension when fully assembled. Amphenol(R) Multi-Channel fiber optic connectors are supplied less contacts. Order multi-mode termini by Amphenol part number designation as shown in the chart below. Consult Amphenol, Sidney, NY for further availability. Fiber Size Core/Cladding Dia (Microns) .037 MAX BUFFER CABLE DIA SHRINK TUBE 1.093 .020 .123 MIN .063 MAX CABLE DIA .063 MAX CABLE DIA CERAMIC FERRULE Amphe-Lite Series fiber optic termini - 90 multi-mode, size 16 Amphenol provides 90, size 16 fiber optic termini that can be used with multi-channel cylindrical connectors. 90 Socket Termini (Size 16) Ordering Information for 90 Multi-mode Socket Termini Fiber Size Core/Cladding Dia (Microns) 50/125 62.5/125 100/140 SHRINK TUBING*** 100/140/172 .500 RADIUS REF. Inches Microns CF-198111-010 .0050 127 CF-198111-017 CF-198111-29 CF-198111-29A .0057 .0069 .0068 145 175 173.5 .675 MAX. 1.093 .020 A DIA. REF. .557 .008 .537 REF. 1.145 MAX. .102 .001 DIA. .162 .004 .128 +.002 DIA. -.001 A Dia Ref For use in Cylindrical Connectors OR Additional sizes available upon request: consult Amphenol, Sidney, NY for availability. * Consult Amphenol, Sidney, NY for ordering 1.820 MAX.** 1.100 REF. Socket, Size 16 Amphenol Part Number .06240 .00002 ALIGNMENT SLEEVE*** information. ** Indicated dimension when fully assembled. *** Shrink tubing and alignment sleeve are shipped unassembled. .267 +.003 -.002 CERAMIC FERRULE 90 Pin Termini (Size 16) Ordering Information for 90 Multi-mode Pin Termini Fiber Size Core/Cladding Dia (Microns) 50/125 62.5/125 100/140 100/140/172 50/125 62.5/125 100/140 100/140/172 Pin, Size 16 Amphenol Part Number For use in Cylindrical Connectors A Dia Ref B Max (Inches) C Ref (Inches) Inches Microns CF-198110-010 .0050 127 1.121 1.100 CF-198110-017 CF-198110-029 CF-198110-29A .0057 .0069 .0068 145 175 173.5 1.121 1.121 1.121 1.100 1.100 1.100 CF-198112-010 .0050 127 1.003 .900 CF-198112-017 CF-198112-029 CF-198112-29A .0057 .0069 .0068 145 175 173.5 1.003 1.003 1.003 .900 .900 .900 OR OR Additional sizes available upon request: consult Amphenol, Sidney, NY for availability. * Consult Amphenol, Sidney, NY for ordering information. .500 RADIUS .297 +.003 -.002 .102 .001 .0625 +.0000 DIA. -.0002 SHRINK TUBE A DIA. REF. 20 CERAMIC FERRULE .128 +.002 DIA. -.001 B MAX C REF Amphe-Lite Series application tools The following data includes information pertaining to the application tools which have been established for crimping, inserting, and removing contacts incorporated in the Amphe-Lite Series connectors. For additional information on coaxial contact tools see catalog 12-130. All crimping tools included are the "full cycling" type. There is a possibility of additional crimping tools other than those included being available at present or in the future for this specific application. RECOMMENDED CRIMPING TOOLS Contact Size/Type 12 Pin and Socket 16 Pin and Socket 20 Pin and Socket 22D Pin 22D Socket 8 Twinax Center Pin and Socket 8 Twinax Intermediate Outer Pin & Socket Crimping Tool M22520/1-01 M22520/1-01 M22520/7-01 M22520/1-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 Turret Die or Positioner M22520/1-04 M22520/1-04 M22520/7-04 M22520/1-04 M22520/2-10 M22520/7-08 M22520/2-09 M22520/7-07 M22520/2-07 M22520/7-05 M22520/2-01 M22520/2-37 M22520/5-01 M22520/5-200 Contact Size/Type 8 Coaxial Inner Pin and Socket Crimping Tool Turret Die or Positioner M22520/2-01 M22520/2-31 M22520/5-05 Die Closure B M22520/5-41 Die Closure B M22520/10-07 Die Closure B M22520/5-01 8 Coaxial Outer Pin and Socket M22520/5-01 M22520/10-01 16 Coaxial Inner Pin and Socket 16 Coaxial Outer Pin and Socket 12 Coaxial Inner Pin and Socket 12 Coaxial Outer Pin and Socket 10 (Power) Where 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are required to crimp the contact. The above crimping tools and positioners are available from the approved tool manufacturer. M22520/2-01 M22520/2-35 M22520/4-01 M22520/4-02 M22520/2-01 M22520/2-34 M22520/31-01 M22520/31-02 TP201423 1716P-1 INSERTION TOOLS Plastic Tools Use with Contact Size 10 (Power) 12 16 20 22D 8 Coaxial 8 Twinax MS Part Number M81969/14-05* M81969/14-04* M81969/14-03* M81969/14-10* M81969/14-01* Color Gray / (White) Yellow / (White) Blue / (White) Red / (Orange) Green / (White) None Metal Tools Angle Type MS Proprietary Part Number Part Number M81969/8-11 M81969/8-09 11-8674-12 M81969/8-07 11-8674-16 M81969/8-05 11-8674-20 M81969/8-01 11-8674-24 None Required M81969/46-06** None Straight Type Proprietary Part Number 11-8794-12 11-8794-16 11-8794-20 11-8794-24 Color Green Yellow Blue Red Black Red REMOVAL TOOLS Plastic Tools Use with Contact Size 10 (Power) 12 16 20 22D 8 Coaxial 8 Twinax MS Part Number M81969/14-05* M81969/14-04* M81969/14-03* M81969/14-10* M81969/14-01* M81969/14-12 M81969/14-12 Color (Gray) / White (Yellow) / White (Blue) / White (Orange)/ Red (Green) / White Green Green For Unwired Contacts Proprietary Part Number 11-10050-11 11-10050-10 11-10050-9 11-10050-7 None None Metal Tools Angle Type MS Part Number M81969/8-12 M81969/8-10 M81969/8-08 M81969/8-06 M81969/8-02 None M81969/46-12** Proprietary Part Number 11-8675-12 11-8675-16 11-8675-20 11-8675-24 11-9170 11-9170 Straight Type Proprietary Part Number 11-8795-12 11-8795-16 11-8795-20 11-8795-24 DRK264-8 N/A Color Green / White Yellow / White Blue / White Red / White Green / White N/A N/A The M81969/8, 11-8674, 11-8675,and 11-8794 metal contact insertion and removal tools will accommodate wires having the maximum outside diameter as follows: Contact size 12-.155, 16-.109, 20-.077, 22D-.050. When wire diameters exceed those specified, the plastic tools must be used. * Double end insertion/removal tool. To be determined. ** Twinax insertion tools are available only in a straight type, metal version. Contact Daniels Manufacturing Co. for availability. 21 Amphe-Lite Series how to order Amphenol(R) Amphe-Lite Composite Connectors can be ordered by coded part number. Ordering procedure is illustrated by part number AL00F9-35PB as shown below: AL 00 F 9 - 35 P B ( ) Connector Type Shell Style Service Class Shell Size Insert Arrangement Contact Type Alternate Positions Specials Connector Type AL . . . designates Amphe-Lite Connector Series Shell Style 00 . . . designates wall mount receptacle 06 . . . designates straight plug 07 . . . designates jam nut receptacle Service Class F . . . . electroless nickel plated composite shells, with fluorinated silicone rubber components for increased fluid resistance FD . . . electroless nickel plating composite shells, with dimethyl silicone rubber components U . . . . black composite, unplated, with fluorinated silicone rubber components for increased fluid resistance UD . . . black composite, unplated, with dimethyl silicone rubber components Shell Size 9 thru 25 available Insert Arrangement See insert arrangement chart, page 3. See insert configurations illustrated on pages 5-8. Contact Type P . . . . designates standard 500 cycle pin contacts S . . . . designates standard 500 cycle socket contacts C . . . . designates pin PC tail contacts loaded in connector (see page 17). D . . . . designates socket PC tail contacts loaded in connector (see page 17). Alternate Positions Locksmith keying - rotation of minor keys. "N" not required for normal position, see page 4. Specials NMG . designates non-magnetic connectors. See page 24 for description of the new non-magnetic product offering of 100% non-magnetic style Amphe-lite connectors. Other specials include optional contact styles and contact platings. Also includes a high decoupling style of Amphe-Lite. Consult Amphenol, Sidney, NY for part numbering suffix for specials. Standard Packaging The Amphe-Lite Series is shipped with connectors and contacts packaged in bulk. Consult Amphenol Industrial, Sidney NY for special packaging requirements pheno l Am E U RoHS COMPLIANT PRODUCT AVAILABLE - Consult Amphenol Industrial Operations. C HS Ro E /2 002 / 95 / 22 Amphe-Lite - capabilities fiber optics, coax contacts, flex termination, PC tails FIBER OPTIC Fiber optic termini connectors offer a precision optic interconnect system within the Amphe-Lite connector. The Amphe-Lite connector provides protection from damage in severe environmental and physical conditions. Optical performance is optimized utilizing the ceramic alignment features employed by the termini. Insertion losses are typically .8dB and can range from .5 to 1.5 dB, depending on test conditions. See pages 18-20 for fiber optic termini features and how to order. Ask for publication 12-352 or contact Sidney, NY for more information on Amphenol Fiber Optic Connectors. Also available with MT and LC termination within an Amphe-Lite shell kit. Contact Amphenol, Sidney for more information. CONNECTORS WITH COAX CONTACTS For shielded wire applications, coaxial contacts can be incorporated into Amphe-Lite connectors. Designed-in crimp or solder types are available to fit various RG and special cables. High performance coaxial contacts eliminate discontinuities or impedance variations due to movement of parts under axial load. For further information on coax contacts ask for catalog 12-130 Fiber Optics and Coax Contacts FILTER CONNECTORS FOR EMI PROTECTION EMI shielding protection can be integrated into the Amphe-Lite connector with a planar array filter device. This provides a cost effective alternative to discrete devices mounted inside the box, and provides the weight and space savings necessary for modern electronic systems. Amphenol's industrial connectors with filter protection are called the Amphe-dB Series; a family of popular industrial cylindricals that are enhanced to provide EMI protection. The Amphe-dB Series family includes the Amphe-Lite filter with a planar filter device and also MIL-5015 and MIL-C-26482 connectors which incorporate chip capacitor board filter devices. FLEX TERMINATION ASSEMBLIES FOR PRINTED CIRCUIT BOARD APPLICATIONS Amphe-dB - Amphe-Lite Connector with Planar Array Filter Amphenol provides flex termination assemblies for printed circuit board attachment. Flex circuits are available for Amphe-Lite connectors in flat or sculptured styles. Sculptured(R) Flexible Circuits with built-in terminations eliminate the failures associated with crimped or solder-on contacts, and they are designed to geometrically fit the tight space requirements within a unit. They plug into a printed circuit board and create a self-locking terminal pad which eliminates the need for an additional interconnect to the PCB. Consult Amphenol Industrial Operations for information on Amphe-Lite connectors with flex circuits. PC TAIL CONTACTS IN AMPHE-LITE CONNECTORS Another Amphe-Lite option allowing for greater flexibility, is the jam nut with the stand-off adapter. This combination provides a means to fasten a PCB or rigid flex to the rear of a jam nut shell. Shell style designator is a 0P. An example part number is AL0PF17-35P. Consult Amphenol Industrial Operations for further information. Amphe-Lite Jam Nut Connector with Stand-off Adapter and PC Tails 23 Flex Termination Assemblies See catalogs online at www.amphenol-industrial.com Amphe-Lite Series - capabilities non-magnetic connectors, ground plane connectors, twinax contacts, power contacts NON-MAGNETIC AMPHE-LITE CONNECTORS A new product offering from Amphenol is the non-magnetic Amphe-Lite style which is made of a durable corrosion resistant composite material for harsh environments.The same triple start thread used on standard Amphe-Lite connectors allows for complete mating in a single turn of the coupling nut. IP67 sealing grommets and interfacial seals are standard. It is an ideal solution for MRI equipment in the medical market, and in other test equipment where a 100% non-magnetic multi-conductor connector is required. With up to 128 size 22D contacts in one connector, the Amphenol non-magnetic Amphe-Lite is one of the few 100% non-magnetic connectors available today. It is available in a straight plug and three receptacle shell styles: wall mount, in-line and jam nut. Non-magnetic styles are available with many of the standard AmpheLite inserts. A wide variety of contact styles can be incorporated, and it can also be assembled with Amphenol ACT flex circuits. Non-Magnetic Amphe-Lite Connector with Power Contacts, Fiber Optics and Flex Circuitry GROUND PLANE CONNECTORS Amphenol offers Amphe-Lite connectors for data bus, LAN and coax/triax/twinax transmission lines with conductive inserts that ground the outer conductor of the coax, triax or twinax contact to the shell. These connectors are sold "less contacts". They will accommodate size 8 coax, triax or twinax contacts or size 12 and 16 coax contacts. The insert availability chart on page 3 indicates the patterns that are available in a ground plane version, (see those designated with a star symbol), and consult Amphenol, Sidney NY for ordering procedures. CONNECTORS WITH CONCENTRIC TWINAX CONTACTS Ground Plane Connector with Metallic Insert and Concentric Twinax Contacts The size 8 concentric twinax contact was developed for use in MILSTD-1553 Airborne multiplex data bus applications which require high performance interconnect characteristics in multi-pin connectors. The Amphe-Lite Series with concentric twinax contacts are ideal for communication data bus applications. The concentric twinax contact is crimp terminable to twisted-shielded cable. For further information on concentric twinax contacts ask for Amphenol Catalog 12-130. CONNECTORS WITH REDUCED COMPONENT TWINAX (RCT) CONTACTS The RCT (Reduced Component Twinax) contact meets MIL-C39029/90 and /91 requirements for intermateability and performance while reducing the number of user-assembled components from seven to three. The inner conductors and outer barrel of the RCT are each terminated to the cable by a crimp joint, so no costly assembly soldering operations are required. Features include: * Three user assembled components * Available in size 8 and size 10 contacts * MIL-C-17/176-00002 cable termination * For installation in Amphe-Lite connectors * Termination completed in only two crimping operations * Inner conductors stripped to common length, eliminating multiple measurements For further information on RCT contacts ask for Amphenol Catalog 12-130. See catalogs online at www.amphenol-industrial.com Concentric Twinax Contacts Qualified to M39029/90 and /91 Cable Crimp Ferrule Intermediate & Inner Assembly Outer Pin Assembly RCT (Reduced Component Twinax) Contact CONNECTORS WITH POWER CONTACTS Size 10 power, size 12 and size 16 contacts are available in many standard insert arrangements. These contacts provide a wide range of power transmission capabilities. Standard contacts are gold plated to maintain a superior conductive surface. For further information on insert patterns that contain power contacts refer to the insert availability chart on page 3. 24