www.osram-os.com Produktdatenblatt | Version 1.1 SFH 300 FA SFH 300 FA Radial T1 3/4 Silicon NPN Phototransistor Applications ----Electronic Equipment ----Industrial Automation (Machine Controls, Light Barriers, Vision Controls) ----Highbay Industrial ----White Goods Features: ----Package: black epoxy ----ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ----Spectral range of sensitivity: (typ) 730 ... 1120 nm ----High linearity ----Available in groups Ordering Information Type SFH 300 FA SFH 300 FA-3/4 Photocurrent VCE = 5 V; = 950 nm; Ee = 0.5 mW/cm IPCE 630 ... 3200 A Q62702P1193 1000 ... 3200 A Q62702P3585 Only one bin within one packing unit (variation less than 2:1) 1 Version 1.3 | 2018-07-05 Ordering Code SFH 300 FA Maximum Ratings TA = 25 C Parameter Symbol Operating temperature Top min. max. -40 C 100 C Storage temperature Tstg min. max. -40 C 100 C Collector-emitter voltage VCE max. 35 V Collector current IC max. 50 mA Collector surge current 10 s ICS max. 100 mA Emitter-collector voltage VEC max. 7V Total power dissipation Ptot max. 200 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.3 | 2018-07-05 Values SFH 300 FA Characteristics TA = 25 C Parameter Symbol Wavelength of max sensitivity S max typ. 880 nm Spectral range of sensitivity 10% typ. 730 ... 1120 nm Chip dimensions LxW typ. 0.55 x 0.55 mm x mm Radiant sensitive area A typ. 0.11 mm Half angle typ. 25 Dark current VCE = 20 V; E = 0 ICE0 typ. max. 1 nA 50 nA Rise time IC = 1 mA; VCC = 5 V; RL = 1 k tr typ. 10 s Fall time IC = 1 mA; VCC = 5 V; RL = 1 k tf typ. 10 s Collector-emitter saturation voltage 1) IC = IPCE,min X 0.3; Ee = 0.5 mW/cm VCEsat typ. 140 mV Capacitance VCE = 0 V; f = 1 MHz; E = 0 CCE typ. 7.5 pF Thermal resistance junction ambient real RthJA max. Grouping TA = 25 C Group Photocurrent VCE = 5 V; = 950 nm; Ee = 0.5 mW/cm min. IPCE 630 A 1250 A 3 1000 A 2000 A 4 1600 A 3200 A 380 K / W Photocurrent VCE = 5 V; = 950 nm; Ee = 0.5 mW/cm max. IPCE 2 3 Version 1.3 | 2018-07-05 Values SFH 300 FA Relative Spectral Sensitivity 2), 3) Srel = f () 100 OHF04044 Srel % 80 70 60 50 40 30 20 10 0 400 500 600 700 800 900 nm 1100 Directional Characteristics Srel = f () 4 Version 1.3 | 2018-07-05 2), 3) SFH 300 FA Photocurrent Dark Current 2), 3) IPCE = f (Ee) ; VCE = 5 V 2), 3) ICE0 = f (VCE) ; E = 0 ; OHF04049 10 1 nA I CEO 10 0 10 -1 10 -2 0 5 10 15 20 25 30 V 35 VCE Collector-Emitter Capacitance CCE = f (VCE); f = 1 MHz; E = 0 ; OHF04051 8 pF C CE 7 6 5 4 3 2 1 0 -3 10 10 -2 10 -1 10 0 10 1 V 10 2 VCE 5 Version 1.3 | 2018-07-05 2), 3) SFH 300 FA Dark Current Photocurrent 2) ICE0 = f (TA); E = 0 IPCE,rel = f (TA); VCE = 5 V OHF04050 10 4 nA I CEO 10 3 10 2 10 1 10 0 10 -1 10 -2 -25 0 2) 25 50 75 C 100 TA 6 Version 1.3 | 2018-07-05 SFH 300 FA Dimensional Drawing 4) 1.2 (0.047) 25.2 (0.992) 24.2 (0.953) Collector Approximate Weight: 303.0 mg Package marking: Collector 7 Version 1.3 | 2018-07-05 7.8 (0.307) 7.5 (0.295) 9.0 (0.354) 8.2 (0.323) 5.9 (0.232) 5.5 (0.217) o5.1 (0.201) 1.8 (0.071) 1.0 (0.039) 2.54 (0.100) spacing Emitter 1.3 (0.051) 0.6 (0.024) 0.4 (0.016) 1.0 (0.039) 0.7 (0.028) Area not flat Chip position 11.6 (0.457) 11.2 (0.441) 4.5 (0.177) 4.2 (0.165) 0.6 (0.024) 0.4 (0.016) GEOY6652 SFH 300 FA Recommended Solder Pad 8 Version 1.3 | 2018-07-05 4) SFH 300 FA TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave C T 250 235 C - 260 C First wave Second wave Continuous line: typical process Dotted line: process limits T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 C 120 C 100 C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.3 | 2018-07-05 SFH 300 FA Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Packing information is available on the internet (online product catalog). For further application related informations please visit www.osram-os.com/appnotes 10 Version 1.3 | 2018-07-05 SFH 300 FA Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the OSRAM OS Webside. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product safety devices/applications or medical devices/applications OSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. In case Buyer - or Customer supplied by Buyer- considers using OSRAM OS components in product safety devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordinate the customer-specific request between OSRAM OS and Buyer and/or Customer. 11 Version 1.3 | 2018-07-05 SFH 300 FA Glossary 1) IPCEmin: IPCEmin is the min. photocurrent of the specified group. 2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) Testing temperature: TA = 25C 4) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with 0.1 and dimensions are specified in mm. 12 Version 1.3 | 2018-07-05 SFH 300 FA Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 13 Version 1.3 | 2018-07-05