COMPUTING
Ideal for high touch and high
throughput packet processing
applications to support the latest
data-intensive network evolution
Two Cavium OCTEON II CN6880
multi-core MIPS64 processors with
up to 128GB DRAM
Support for Wind River Linux 4,
Cavium SDK and TurboDPI™ II
Ethernet switch connecting all rear
I/O, backplane I/O and OCTEON
processors with L2 and L3 switch
management software
Local Freescale QorIQ dual-core
blade management processor
Rear transition module with
8x 10GbE plus 2x 40GbE
I/O connectivity
Zone 3 PCI Express ports enable
the design of custom RTMs with
mass storage
Designed for NEBS and ETSI
compliance in a CP-TA B.4
class enclosure
ATCA-9405
40G Packet Processing Blade
The ATCA-9405 from Artesyn Embedded Technologies combines a 40Gb/s ATCA fabric, up to
160Gb/s direct Ethernet terminations, a sophisticated on-board managed Ethernet switching
infrastructure to support trafc ow to and from the MIPS64 cores and acceleration engines
provided by two Cavium OCTEON II CN6880 multi-core processors.
It represents a balanced 3x to 4x performance and throughput increase over previous
generation products for high touch and high throughput packet processing applications.
Packet processing is used widely in network security applications such as unied threat
management and session border controllers; in the latest 4G LTE mobile networks for lawful
interception and packet gateways; and in deep packet inspection applications for policy
enforcement and quality of service control.
An optional mezzanine module attached to both Cavium OCTEON processors further increases
the exibility of applications for Artesyn’s ATCA-9405, since you can for example add TCAMs or
search processors for the fastest table lookups.
A local dual-core service processor is used to ofoad the OCTEON processors from other
blade functions in order to maximize the packet processing capability, including managing
Layer 2 and 3 switching/routing functions on the local Ethernet switch.
Software support includes Wind River Linux 4, Cavium’s packet processing SDK and
TurboDPI™ II deep packet inspection software.
The ATCA-9405 can operate with or without rear transition modules (RTMs) depending on
system architecture, and is designed to meet NEBS/ETSI requirements when used in
conjunction with any of Artesyn’s CPTA B.4 grade Centellis™ AdvancedTCA systems, which
cover 2-slot, 6-slot and 14-slot variants.
Data Sheet
ATCA-9405 Data Sheet
ATCA-9405 Overview
The ATCA-9405 packet processing blade has been developed for
the most demanding applications intomorrow’s communication
networks. With support for up to 160Gbps Gigabit Ethernet (GbE)
I/O bandwidthand a redundant 40GbE fabric, it allows thedesign of
compact application systems for theupcoming new IP data
infrastructure.
Target applications are LTE transport and control plane functions,
secure cloud services like application-aware switching, load
balancers and security appliances like IDS and IPS.
Two Cavium OCTEON II CN6880 multi-core MIPS64processor
support each 32 cnMIPS64 v2 generalpurpose processing cores
and more than 85 applicationacceleration engines like:
Third generation Reg Ex Engine with Hyper Finite Automata
(HFA) for up to 2x 15Gbps pattern matching per blade
> 400Gbps DDR3 memory bandwidth per processor
A new LZS storage compression mode with compression/
decompression performance of up to 40Gbps per blade
High bandwidth, low-latency I/O and coprocessor networks
Hardware and software virtualization support with the ability to
partition into multiple virtual SOCs
Power Optimizer Technology with exible, dynamic control of
device core power consumption
NETWORKING CONNECTIVITY
The ATCA-9405 packet processing blade provides PICMG® 3.0
base interface connectivity in a dual star conguration using
standard GbE technology with redundant fabric channel support.
1x 1000BASE-BX (PICMG 3.1 Option 1) or IEEE 802.3
1000BASE-KX
1x 10GBASE-BX4 (PICMG 3.1 Option 9) or IEEE 802.3
10GBASE-KX4
1/2/4x IEEE 802.3 10GBASE-KR
1x IEEE 802.3 40GBASE-KR4
PACKET PROCESSING COMPLEX
The ATCA-9405 contains two Cavium OCTEON II CN 6880
multi-core MIPS64 packet processors. The MIPS64 processor
cores can be congured for up to 32-way SMP LINUX support or
can run Cavium Simple Executives and run fast path packet
processing software for time critical applications.
Two Cavium OCTEON II CN6880 processor @ 1.2 GHz
Four 240-pin DDR3 VLP DIMM sockets per processor, bus-
width 64-bit plus 8-bit ECC
Front panel connections
• Serial consoles
• 1x 1GbE
LOCAL MANAGEMENT COMPLEX
The ATCA-9405 contains a powerful dual-core Freescale QorIQ™
P2020 processor for basic board setup, general board
management and high performance Ethernet switch management.
Freescale QorIQ P2020 communications processor @ 1.0 GHz
One 240-pin DDR3 VLP DIMM socket, bus-width 64-bit plus
8-bit ECC
• 1x 2GB DDR3 memory DIMM
• 16GB USB ash memory disk
Front panel connections
• 1x COM,1x USB, 1x 1GbE
REMOTE MANAGEMENT
In addition to standard remote control features of Linux, including
SNMP, the ATCA-9405 provides an on-board independent terminal
server allowing remote network access to the serial consoles of all
main processors on the blade.
REAR TRANSITION MODULE
The RTM for the ATCA-9405 blade provides a total of 160 Gigabit
Ethernet I/O.
8x 10 Gigabit Ethernet via a SFP/SFP+ interface
2x 40 Gigabit Ethernet via a QSFP interface
RTMs with other Ethernet congurations or with mass storage
support can be made available on customer request.
MEZZANINES
A mezzanine module provides a cross connect data path
between the two Octeon II processors
Alternatively a TCAM mezzanine module can be made available
on request.
MULTICORE CPU (CAVIUM OCTEON II )
The packet processors are supported with a development software
environment (SDK) available from Cavium:
• Linux (Cavium SDK based or based on Wind River Linux 4) for
management operations
• Simple Executive applications running in cores not congured
for Linux
• Development tools and support from Cavium Networks
• Additional production quality development toolkits are available
from Cavium Networks for TCP/IP, IPSec, SSL, SSL-VPN, DPI,
and others
6WINDGate from 6WIND is also available on request.
ATCA-9405 Data Sheet
MANAGEMENT PROCESSOR FIRMWARE/SOFTWARE
The board management processor provides the boot
code for the OCTEON II processors, the basic blade
management services and L2 and L3 switch management
software.
All necessary drivers for the ATCA-9405
Adaption software for the Cavium SDK
Firmware upgrade utility
IPMI support
Switch management software
• Comprehensive L2 and selected L3 functionality
• CLI and SNMP based user interfaces
Based on the Wind River Linux 4 distribution
Hardware Specications
POWER REQUIREMENTS
Redundant -48 to -60 VDC (TNV-2)
Input range: 39 to 72 VDC
Power consumption front blade: 235 Watts (estimated in full
power mode, 32 GB model)
THERMAL CHARACTERISTICS
Operating range: -5 °C to 55 °C
Cooling requirements at ETSI/NEBS conditions according to
CP-TA B.4
BLADE SIZE
PICMG 3.0: 8U form factor, 280 mm x 322.5 mm, single slot
Regulatory Compliance
Item Description
Designed to comply with NEBS,
Level 3
Telcordia GR-63-CORE, NEBS Physical Protection
Telcordia GR-1089-CORE, Electromagnetic Compatibility and Electrical Safety – Generic Criteria for Network Telecommunications Equipment. Equipment Type 2
Designed to comply with ETSI ETSI Storage, EN 300 019-1-1, Class 1.2 equipment, Not Temperature Controlled Storage Locations
ETSI Transportation, EN 300 019-1-2, Class 2.3 equipment, Public Transportation
ETSI Operation, EN 300 019-1-3, Class 3.1(E) equipment, Temperature Controlled Locations
ETSI EN 300 132-2 Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct
current (dc)
ETSI ETS 300 753, Equipment Engineering (EE); Acoustic noise emitted by telecommunications equipment
EMC ETSI EN 300 386 Electromagnetic compatibility and Radio spectrum Matters (ERM); telecommunication network equipment; ElectroMagnetic Compatibility
(EMC) requirements, Telecommunication equipment room (attended)
CFR 47 FCC Part 15 Subpart B, Class A (US); FCC Part 15 - Radio Frequency Devices; Subpart B: Unintentional Radiators
AS/NZS CISPR 22 (Australia/New Zealand), Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
VCCI Class A (Japan), Voluntary Control Council for Interference by Information Technology Equipment
CISPR 22 Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
CISPR 24 Information technology equipment – Immunity characteristics – Limits and methods of measurement
Safety Certied to UL/CSA 60950-1, EN 60950-1 and IEC 60950-1 CB Scheme
Safety of information technology equipment, including electrical business equipment
RoHS/WEEE compliance
DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS)
DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic equipment (WEEE)
Interoperability Designed to operate within a CP-TA B.4 system environment at full performance
ATCA-9405 Data Sheet
www.artesyn.com
WORLDWIDE OFFICES
Tempe, AZ U.S.A. +1 888 412 7832 Hong Kong +852 2176 3540
Paris, France +33 1 60 92 31 20 Shanghai, China +86 21 3395 0289
Munich, Germany +49 89 9608 2430 Tokyo, Japan +81 3 5403 2730
Tel Aviv, Israel +972 9 9560361 Seoul, Korea +82 2 3483 1500
Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and
service marks of Artesyn Technologies, Inc. All other names and logos referred to are trade names, trademarks,
or registered trademarks of their respective owners. © 2014 All rights reserved. ATCA-9405-D1 03/11/14
PICMG, AdvancedTCA, ATCA and the AdvancedTCA logo are trademarks of PICMG. Service Availability is a proprietary trademark used under license. Intel and Xeon are trademarks of Intel Corporation
or its subsidiaries in the Unites States and other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other product or service names are the property of their
respective owners.
This document identies products, their specications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future
availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Artesyn Embedded Technologies may sell products. A prospective buyer
should exercise its own independent judgment to conrm the suitability of the products for particular applications. Artesyn reserves the right to make changes, without notice, to any products or information
herein which will, in its sole discretion, improve reliability, function, or design. Artesyn does not assume any liability arising out of the application or use of any product or circuit described herein; neither
does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Artesyn’s licensee, licensee’s transferees,
and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations.
SOLUTION SERVICES
Artesyn Embedded Technologies provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help
speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh.
Ordering Information
Part Number Description
ATCA-9405 blades
ATCA-9405B-16GB ATCA-9405 - 2X CN6880-1.2GHZ, 2X 8GB DDR3 MEMORY ON TWO LOCAL MEMORY CONTROLLERS - 1X P2020
WITH 2GB MEMORY - 16GB FLASH - BBS - SWITCH MGMT SW
ATCA-9405B-32GB ATCA-9405 - 2X CN6880-1.2GHZ, 2X 16GB DDR3 MEMORY ON FOUR LOCAL MEMORY CONTROLLERS - 1X
P2020 WITH 2GB MEMORY - 16GB FLASH - BBS - SWITCH MGMT SW
ATCA-9405B-64GB ATCA-9405 - 2X CN6880-1.2GHZ, 2X 32GB DDR3 MEMORY ON FOUR LOCAL MEMORY CONTROLLERS - 1X
P2020 WITH 2GB MEMORY - 16GB FLASH - BBS - SWITCH MGMT SW
ATCA-9405B-128GB ATCA-9405 - 2X CN6880-1.2GHZ, 2X 64GB DDR3 MEMORY ON FOUR LOCAL MEMORY CONTROLLERS - 1X
P2020 WITH 2GB MEMORY - 16GB FLASH - BBS - SWITCH MGMT SW
ARTM-9405B-16X10GE ARTM-9405 - 8X10G (SFP+) and 2x40G (QSFP)
ATCA-9405 Accessories
RJ45-DSUB-ATCA RJ45 DSUB CABLE FOR THE ATCA-7140, 7X50, 736X, 737X, 747X, 83XX, 940X ATCA BLADES (ROHS 6/6)
SFP-CO-RJ-45 1G COPPER SMALL FORM-FACTOR PLUGGABLE (SFP) TRANSCEIVER MODULE - RJ-45 CONNECTOR
SFP-MM-SX-LC 1G FIBER SMALL FORM-FACTOR PLUGGABLE (SFP) TRANSCEIVER MODULE - 850NM, SX, LC CONNECTOR
SFPP-CO-RJ-45-3M 10G COPPER SMALL FORM-FACTOR PLUGGABLE PLUS (SFP+) MODULES WITH MOLDED CABLE - 3 METERS
SFPP-SM-LR-LC 10G FIBER SMALL FORM-FACTOR PLUGGABLE PLUS (SFP+) TRANSCEIVER MODULE -1310NM, LR, LC CONNECTOR
SFPP-MM-SR-LC 10G FIBER SMALL FORM-FACTOR PLUGGABLE PLUS (SFP+) TRANSCEIVER MODULE - 850NM, SR, LC CONNECTOR
QSFPP-40G-SR4-MODULE 40G QSFP+ MODULE - 40GBASE-SR4 - 850NM - FOR MULTIMODE FIBER - MTP (MPO) CONNECTOR
CABLE-OPT-F102-5M OPTICAL CABLE FOR MULTI-MODE, SFP AND SFPP CONNECTIONS (5M)
CABLE-COP-QSFPP-3M 40G QSFP+ DIRECT ATTACH, MOLDED CABLE - 3 METER
CABLE-OPT-QSFPP-5M 40G QSFP+ OPTICAL CABLE - MULTIMODE - MTP (MPO) CONNECTOR - 5 METER
CABLE-B-OPT-QSFPP-5M 40G QSFP+ OPTICAL BREAK-OUT CABLE - MULTIMODE - 1X MTP (MPO) CONNECTOR, 8X LC CONNECTORS - 5 METER
