1998 Mar 27 6
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅5 mm
FEATURES
•Housing diameter 5 mm
•Top and bottom or top adjustment
•Round or hexagonal head
•Vertical version.
APPLICATIONS
•For consumer and industrial
equipment.
DESCRIPTION
The vanes of the trimmer are stacked
on a sturdy plastic base. The colour of
the base indicates the maximum
capacitance (see Tables 4, 5 and 6).
The dielectric is a film of
polypropylene (PP) or
polytetrafluorethylene (PTFE) for the
standard versions and polycarbonate
(PC) for the economic and hexagonal
head versions. The dielectric
supports the vanes in such a way that
good stability is ensured and no
microphony can occur.
Flux absorption between the vanes is
prevented.
Cleaning with solvents is not advised.
For outline drawings and dimensions
see Figs 1 and 2.
QUALITY LEVEL
Sampling and data evaluation for
quality level in accordance with
“MIL-STD-105D”
and
“IEC 60410”
:
<0.15% major defects
<0.65% minor defects.
Each capacitor is tested for minimum
Cmax and is also subjected to the full
test voltage.
QUICK REFERENCE DATA
MECHANICAL DATA
DESCRIPTION VALUE
Cmin/Cmax 0.35/1.5 to 4/27 pF
Rated voltage (DC) 150 V
Test voltage (DC) for 1 minute 300 V
Maximum contact resistance 10 mΩ
Minimum insulation resistance 10000 MΩ
Tan δ at Cmax, 1 MHz:
PC ≤70 ×10−4
PP, PTFE ≤10 ×10−4
Category temperature range:
PP −40 to +70 °C
PC, PTFE −40 to +85 °C
Climatic category (IEC 60068):
PP 40/070/21
PC, PTFE 40/085/21
Minimum storage temperature −55 °C
Related specification IEC 60418-1 and 4
DESCRIPTION VALUE
Effective angle of rotation 180°
Operating torque:
Cmax <20 pF 1 to 15 mNm
Cmax ≥20 pF 1 to 25 mNm
Maximum axial thrust 2 N
1998 Mar 27 7
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅5 mm
Fig.1 Trimmers 2222 808 ..... series, with round head.
Dimensions in mm.
For dimensions H, W and L, see Tables 1 and 2.
For dimension P, see Table 3.
(1) The position of the shaft is not relative to the position of the vanes.
a. Dimensional outlines.
b. Hole pattern.
handbook, full pagewidth
3 +0.7
−0.5
0.3 +0.1
0
0.4 +0.2
0
1.15 max.
5.6 ±0.2
2.2 ±0.2
3 ±0.5
5.1 ±0.2
1.6
±0.2
L
W
H
∅2.2
0.6(1)
(1)
0.5
CCB130
handbook, halfpage
1.3
P
CCB131
1998 Mar 27 8
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅5 mm
Fig.2 Trimmers 2222 808 ..... series, with hexagonal head.
Dimensions in mm.
For dimensions H, W and L, see Table 2.
For dimension P, see Table 3.
a. Dimensional outlines.
handbook, full pagewidth
1.15 max.
5.6 ±0.2
2.2 ±0.2
3 ±0.5
L
W
H
1.91
0.6
2.1
0.65
CCB132
handbook, halfpage
1.3
P
CCB131
b. Hole pattern.
1998 Mar 27 9
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅5 mm
Table 1 Standard versions; capacitance and relevant physical dimensions; see Fig.1
Table 2 Hexagonal and economic versions; relevant physical dimensions; see Fig.2
Cmin/Cmax
(pF) Hmax
(mm) Wmax
(mm) Lmax
(mm)
0.35/1.5 7.0 5.5 7.3
1.5/5 7.0 5.5 7.3
3/10 7.0 5.5 7.3
3/15 8.8 5.5 7.3
4/20 8.8 5.5 7.3
4/27 9.0 6.2 7.8
TYPE OF HEAD Hmax
(mm) Wmax
(mm) Lmax
(mm)
Hexagonal 9.7 5.5 7.3
Round 7.7 5.5 7.3
MOUNTING
The trimmer has a lead pitch of 5.08 mm or 5.6 mm and
can be mounted on printed-circuit boards with a minimum
hole diameter of 1.25 mm.
PACKAGING
Bulk packaged in cardboard boxes lined with expanded
plastic, 1000 units per box.
1998 Mar 27 10
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅5 mm
ORDERING INFORMATION
Table 3 Selection chart; see Figs 1 and 2
Cmin/Cmax
(pF)
CATALOGUE NUMBER 2222 808 .....
TOP AND BOTTOM
ADJUSTMENT
(P = 5.6 mm)
TOP
ADJUSTMENT ONLY
(P = 5.6 mm)
TOP
ADJUSTMENT ONLY
(P = 5.08 mm)
Standard versions: polytetrafluorethylene, round head
0.35/1.5 22158 −−
Standard versions: polypropylene, round head
1.5/5 23508 −20508
3/10 23109 −20109
3/15 23159 −20159
4/20 23209 −20209
4/27 23279 −20279
Economic versions: polycarbonate, round head
1.5/7 −20126 −
1.6/15 −20127 −
3/20 −20123 −
3.5/27 −20128 −
Economic versions: polycarbonate, hexagonal head
1.5/7 −21708 −
1.6/15 −21159 −
3/20 −21209 −
3.5/27 −21279 −
1998 Mar 27 11
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅5 mm
ELECTRICAL DATA
Table 4 Standard versions with round head
Note
1. C: 60% to 80% of Cmax; Tamb: from +20 °C to +70 °C.
Table 5 Economic versions with round head
Table 6 Versions with hexagonal head
GUARANTEED
MAX. Cmin/
MIN. Cmax
at 200 kHz
(pF)
tan δat
Cmax ×10−4TEMP.
COEFF.(1)
(10−6/K)
MIN. fres
at Cmax
(MHz)
COLOUR
OF
BASE
SMALLEST
PACKAGING
QUANTITY
CATALOGUE
NUMBER
1 MHz 100 MHz
0.35/1.5 ≤10 −−450 ±550 −−1000 2222 808 22158
1.5/5 ≤10 ≤25 −200 ±550 700 grey 1000 2222 808 20508
2222 808 23508
3/10 ≤10 ≤25 −250 ±550 500 yellow 1000 2222 808 20109
2222 808 23109
3/15 ≤10 ≤25 −250 ±550 400 blue 1000 2222 808 20159
2222 808 23159
4/20 ≤10 ≤25 −250 ±400 300 green 1000 2222 808 20209
2222 808 23209
4/27 ≤10 ≤25 −250 ±400 300 red 1000 2222 808 20279
2222 808 23279
REFERENCE
Cmin/Cmax
(pF)
tan δat
Cmax ×10−4
(1 MHz)
TEMP.
COEFF.
(10−6/K)
COLOUR
OF
BASE
SMALLEST
PACKAGING
QUANTITY
CATALOGUE
NUMBER
1.5/7 ≤70 −50 ±550 grey 1000 2222 808 20126
1.6/15 ≤70 −50 ±550 blue 1000 2222 808 20127
3/20 ≤70 −50 ±550 green 1000 2222 808 20123
3.5/27 ≤70 −100 ±400 red 1000 2222 808 20128
REFERENCE
Cmin/Cmax
(pF)
tan δat
Cmax ×10−4
(1 MHz)
TEMP.
COEFF.
(10−6/K)
COLOUR
OF
BASE
SMALLEST
PACKAGING
QUANTITY
CATALOGUE
NUMBER
1.5/7 ≤70 −50 ±550 grey 1000 2222 808 21708
1.6/15 ≤70 −50 ±550 blue 1000 2222 808 21159
3/20 ≤70 −50 ±550 green 1000 2222 808 21209
3.5/27 ≤70 −100 ±400 red 1000 2222 808 21279
1998 Mar 27 12
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅5 mm
TESTS AND REQUIREMENTS
Table 7 Test procedures and requirements
IEC
60418-1
CLAUSE
IEC
60068
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
4.2 method of mounting method A
14 capacitance drift after TC measurement ∆C/C: ≤3% for Cmax ≤10 pF
∆C/C: ≤2% for Cmax >10 pF
19 thrust axial thrust of 2 N ∆C/C: ≤0.4%
21 robustness of terminations:
21.1 Ua tensile 1 N no damage
21.2 Ub bending 1 cycle no damage
22 Na rapid change of
temperature 1 cycle; 0.5 hours at lower
and 0.5 hours at upper
category temperature
∆C/C: ≤2.5%
23 T soldering:
Ta solderability solder bath immersion
3 mm; 235 °C; 2 s good wetting
no mechanical damage
Tb resistance to heat solder bath: 260 °C; 10 s no mechanical damage
24 Eb impact bump 4000 ±10 bumps;
40 g; 6 ms ∆C/C: ≤1%;
no mechanical damage
25 Fc vibration frequency 10 to 55 Hz;
amplitude 0.75 mm;
1.5 hours
∆C/C: ≤1%;
no mechanical damage
26 climatic sequence: ∆C/C: ≤4%
26.1 B dry heat 16 hours at upper category
temperature tan δ for PP and PTFE foil:
≤15 ×10−4
tan δ for PC foil:
≤80 ×10−4
Rins:≥10000 MΩ
rotor contact R: ≤10 mΩ
26.2 D damp heat accelerated,
first cycle 1 cycle; 24 hours; +40 °C;
95 to 100% RH voltage proof:
300 V for 1 minute
26.3 Aa cold 16 hours; −40 °C visual examination:
no mechanical damage
26.5 damp heat accelerated,
remaining cycles 1 cycle; 24 hours; +40 °C;
95 to 100% RH operating torque:
1 to 20 mNm for Cmax <20 pF;
1 to 30 mNm for Cmax ≥20 pF
1998 Mar 27 13
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅5 mm
27 Ca damp heat steady state 21 days; +40 °C;
90 to 95% RH ∆C/C: ≤3%
tan δ for PP and PTFE foil:
≤15 ×10−4;
tan δ for PC foil:
≤80 ×10−4
Rins:≥10000 MΩ;
rotor contact R: ≤10 mΩ
voltage proof:
300 V for 1 minute
visual examination:
no mechanical damage
operating torque:
1 to 20 mNm for Cmax <20 pF;
1 to 30 mNm for Cmax ≥20 pF
29 mechanical endurance 10 cycles ∆C/C: ≤3%
∆C/C after axial thrust: ≤0.3%;
rotor contact R: ≤10 mΩ
voltage proof:
300 V for 1 minute
visual examination:
no mechanical damage
operating torque:
0.5 to 22.5 mNm for Cmax <20 pF;
0.5 to 30 mNm for Cmax ≥20 pF
IEC
60418-1
CLAUSE
IEC
60068
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
1998 Mar 27 14
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅7.5 mm
FEATURES
•Housing diameter 7.5 mm
•For a basic grid of 2.54 mm (0.1")
or 2.50 mm
•Top and bottom or top adjustment
•Vertical and horizontal versions
•Round or hexagonal head.
APPLICATIONS
•For consumer and industrial
equipment.
DESCRIPTION
The vanes of the trimmer are stacked
on a sturdy plastic base. The colour of
the base indicates the maximum
capacitance (see Table 2). The
dielectric is a film of polypropylene
(PP), polyethylene (PE),
polycarbonate (PC),
polytetrafluorethylene (PTFE), or
polyethyleneterephtalate (PET) which
supports the vanes in such a way that
good stability is ensured and no
microphony can occur.
Flux absorption between the vanes is
prevented.
Cleaning with solvents is not advised.
Versions are available with either a
vertical spindle (see Fig.1), or a
horizontal spindle (see Fig.2). Both
versions have top adjustment by
means of a screwdriver or trimming
key and bottom adjustment by means
of a key as shown in Fig.5.
For outline drawings and dimensions
see Figs 1 and 2.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Cmin/Cmax 1.4/5.5 to 3/50 pF
Rated voltage (DC) 250 V
Test voltage (DC) for 1 minute 500 V
Maximum contact resistance 10 mΩ
Minimum insulation resistance 10000 MΩ
Category temperature range:
PP −40 to +70 °C
PE, PC, PTFE, PET −40 to +85 °C
Climatic category (IEC 60068):
PP 40/070/21
PE, PC, PTFE, PET 40/085/21
Minimum storage temperature −55 °C
Related specification IEC 60418-1 and 4
QUALITY LEVEL
Sampling and data evaluation for quality level in accordance with
“MIL-STD-105D”
and
“IEC 60410”
:
<0.15% major defects
<0.65% minor defects.
Each capacitor is tested for minimum Cmax and is also subjected to the full
test voltage.
MECHANICAL DATA
DESCRIPTION VALUE
Effective angle of rotation 180°
Operating torque:
Cmax <33 pF 1 to 15 mNm
Cmax ≥33 pF 1 to 25 mNm
Maximum axial thrust 2 N
1998 Mar 27 15
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅7.5 mm
Fig.1 Trimmers 2222 808 ..... series, vertical version.
h
andbook, full pagewidth
1.15 max. stator
rotor (2×)
3 ±0.2
2.5
±0.1
30° ±5°
10(1)
max.
∅2.5
Z
0.6
0.6
0.7 0.5
ROUND HEAD HEXAGONAL HEAD
4.5
±0.2 7.6
±0.1
8
max. 2.2
4
±0.5
0.6 ±0.1 0.5
±0.15
0.95
±0.2
∅1.6
DETAIL Z
turned 90°
CCB134
Dimensions in mm.
For hole pattern see Fig.3.
(1) 11 max. for Cmax = 40 pF and 50 pF.
1998 Mar 27 16
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅7.5 mm
Fig.2 Trimmers 2222 808 ..... series, horizontal version.
Dimensions in mm.
For hole pattern see Fig.4.
(1) 11 max. for Cmax = 40 pF and 50 pF.
handbook, full pagewidth
5 0
−0.1 1.15 max.
stator
rotor (2×)
10(1)
max.
∅2.5
Z
0.6
0.7
4.5
±0.2 7.6
±0.1 8.6
max.
4 ±0.5
8.6 ±0.2
110° ±5°
0.6 ±0.1 0.5
±0.15
0.95
±0.2
∅1.6
DETAIL Z
turned 90°
CCB135
1998 Mar 27 17
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅7.5 mm
Fig.3 Hole pattern; see Fig.1.
handbook, halfpage
R
SR
1.3
5.08
5.08
CCB136
Dimensions in mm.
R = rotor, S = stator.
The large hole is for bottom adjustment and the diameter
is determined by user’s requirements.
Fig.4 Hole pattern; see Fig.2.
handbook, halfpage
1.3 2.5
7.5
RR
S
CCB137
Dimensions in mm.
R = rotor, S = stator.
Adjustment
For top adjustment a screwdriver or trimming key can be
used; for bottom adjustment a key is required as shown
in Fig.5.
Fig.5 Bottom adjustment key.
handbook, halfpage
∅3
2 min.
0.7 +0.1
0
0.6 +0.2
0
∅1.7 +0.1
0
CCB138
Dimensions in mm.
1998 Mar 27 18
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅7.5 mm
ORDERING INFORMATION
Table 1 Selection chart
Cmin/Cmax
(pF)
CATALOGUE NUMBER 2222 808 .....
VERTICAL VERSION HORIZONTAL
VERSION
ROUND HEAD HEXAGONAL HEAD ROUND HEAD
TOP AND BOTTOM
ADJUSTMENT TOP
ADJUSTMENT ONLY TOP AND BOTTOM
ADJUSTMENT TOP AND BOTTOM
ADJUSTMENT
1.4/5.5 11558 00004 −51558
2/9 00018 −−−
2/10 11109 00005 17109 51109
2/10 −11004 −−
2/15 11159 −−−
2/18 00016 −−−
2.5/20 −11006 −−
2.5/22 11229 00006 17229 51229
2.5/27 11279 −−51279
3/33 11339 −−−
3/40 11409 −17409 51409
3/50 11509 −17509 51509
MOUNTING
The trimmer can be mounted on printed-circuit boards with
a grid of 2.50 mm or 2.54 mm and a minimum hole
diameter of 1.25 mm. For hole patterns see Figs 3 and 4.
PACKAGING
Bulk packaged in cardboard boxes lined with expanded
plastic. For smallest packaging quantity (SPQ)
see Table 2.
1998 Mar 27 19
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅7.5 mm
ELECTRICAL DATA
Table 2 Electrical characteristics, smallest packaging quantities and catalogue numbers
GUARANTEED
MAX. Cmin/
MIN. Cmax
at 200 kHz
(pF)
SPINDLE SHAPE
OF
HEAD FIG. ADJ.
MODE DIEL.
tan δat
Cmax ×10−4TEMP.
COEFF.
(10−6/K)
MIN. fres
at Cmax
(MHz)
COL.
OF
BASE SPQ CATALOGUE
NUMBER
1 MHz 100 MHz
1.4/5.5 vertical round 1 top + bottom PE ≤10 ≤25 −250 ±350 850 grey 1400 2222 808 11558
1 top 1400 2222 808 00004
horizontal round 2 top + bottom 1200 2222 808 51558
2/9 vertical round 1 top + bottom PTFE ≤10 ≤15 −150 ±800 400 yellow 1400 2222 808 00018
2/10 vertical round 1 top + bottom
PP ≤10 ≤25 −250 ±800 480 yellow
1400 2222 808 11109
1 top 1400 2222 808 00005
hexag. 1 top 1400 2222 808 17109
horizontal round 2 top + bottom 1200 2222 808 51109
vertical round 1 top PC ≤70 ≤100 −150 ±800 250 yellow 1000 2222 808 11004
2/15 vertical round 1 top + bottom PP ≤10 ≤25 −250 ±600 450 blue 1400 2222 808 11159
2/18 vertical round 1 top + bottom PTFE ≤10 ≤15 −250 ±350 350 green 1400 2222 808 00016
2.5/20 vertical round 1 top PET ≤160 −0±1100 250 green 1000 2222 808 11006
2.5/22 vertical round 1 top + bottom
PP ≤10 ≤25 −200 ±500 350 green
1400 2222 808 11229
1 top 1400 2222 808 00006
vertical hexag. 1 top 1400 2222 808 17229
horizontal round 2 top + bottom 1200 2222 808 51229
2.5/27 vertical round 1 top + bottom PC ≤70 −−50 ±500 350 red 1400 2222 808 11279
horizontal round 2 top + bottom 1200 2222 808 51279
3/33 vertical round 1 top + bottom PP ≤10 −−250 ±350 300 brown 1400 2222 808 11339
3/40 vertical round 1 top + bottom PC ≤70 −−50 ±400 300 violet 1400 2222 808 11409
vertical hexag. 1 top 1400 2222 808 17409
horizontal round 2 top + bottom 1200 2222 808 51409
3/50 vertical round 1 top + bottom PC ≤70 −−50 ±500 250 black 1400 2222 808 11509
vertical hexag. 1 top 1400 2222 808 17509
horizontal round 2 top + bottom 1200 2222 808 51509
1998 Mar 27 20
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅7.5 mm
TESTS AND REQUIREMENTS
Table 3 Test procedures and requirements
IEC
60418-1
CLAUSE
IEC
60068
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
4.2 method of mounting method A
14 capacitance drift after TC measurement ∆C/C: ≤1% for Cmax <40 pF;
∆C/C: ≤2.5% for Cmax ≥40 pF
19 thrust axial thrust of 2 N ∆C/C: ≤0.3%
21 robustness of terminations:
21.1 Ua tensile 1 N no damage
21.2 Ub bending 1 cycle no damage
22 Na rapid change of
temperature 1 cycle; 0.5 hours at lower
and 0.5 hours at upper
category temperature
∆C/C: ≤2%
23 T soldering:
Ta solderability solder bath immersion
3 mm; 235 °C; 2 s good wetting
no mechanical damage
Tb resistance to heat solder bath: 260 °C; 10 s no mechanical damage
24 Eb impact bump 4000 ±10 bumps;
40 g; 6 ms ∆C/C: ≤0.6%;
no mechanical damage
25 Fc vibration frequency 10 to 55 Hz;
amplitude 0.35 mm;
1.5 hours
∆C/C: ≤0.6%;
no mechanical damage
26 climatic sequence: ∆C/C: ≤4
26.1 B dry heat 16 hours at upper category
temperature tan δ: ≤10 ×10−4 for Cmax <27 pF;
tan δ: ≤70 ×10−4 for Cmax ≥27 pF;
tan δ: ≤80 ×10−4 for Cmax ≥40 pF
Rins:≥10000 MΩ;
rotor contact R: ≤10 mΩ
26.2 D damp heat accelerated,
first cycle 1 cycle; 24 hours; +40 °C;
95 to 100% RH voltage proof:
500 V for 1 minute
26.3 Aa cold 16 hours; −40 °C visual examination:
no mechanical damage
26.5 damp heat accelerated,
remaining cycles 1 cycle; 24 hours; +40 °C;
95 to 100% RH operating torque:
1 to 15 mNm for Cmax <33 pF;
1 to 25 mNm for Cmax ≥33 pF
1998 Mar 27 21
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅7.5 mm
27 Ca damp heat steady state 21 days; +40 °C;
90 to 95% RH ∆C/C: ≤5%
tan δ: ≤30 ×10−4 for Cmax <27 pF;
tan δ: ≤70 ×10−4 for Cmax ≥27 pF;
tan δ: ≤80 ×10−4 for Cmax ≥40 pF
Rins:≥10000 MΩ;
rotor contact R: ≤10 mΩ
voltage proof:
500 V for 1 minute
visual examination:
no mechanical damage
operating torque:
1 to 15 mNm for Cmax <33 pF;
1 to 25 mNm for Cmax ≥33 pF
29 mechanical endurance 10 cycles ∆C/C: ≤1.5%
∆C/C after axial thrust: ≤0.3%;
rotor contact R: ≤10 mΩ
voltage proof:
500 V for 1 minute
visual examination:
no mechanical damage
operating torque:
1 to 15 mNm for Cmax < 33 pF;
1 to 25 mNm for Cmax ≥33 pF
IEC
60418-1
CLAUSE
IEC
60068
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
1998 Mar 27 22
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅10 mm
FEATURES
•Housing diameter 10 mm
•For a basic grid of 2.54 mm (0.1")
or 2.50 mm
•Top and bottom or top adjustment
•Vertical and horizontal versions
•Round or hexagonal head.
APPLICATIONS
•For consumer and industrial
equipment.
DESCRIPTION
The vanes of the trimmer are stacked
on a sturdy plastic base. The colour of
the base indicates the maximum
capacitance (see Table 2). The
dielectric is a film of polypropylene
(PP), polycarbonate (PC) or
polytetrafluorethylene (PTFE), which
supports the vanes in such a way that
good stability is ensured and no
microphony can occur.
Flux absorption between the vanes is
prevented.
Cleaning with solvents is not
advised.
Versions are available with either a
vertical spindle (see Figs 1 and 2), or
a horizontal spindle (see Fig.3).
Both versions have top adjustment by
means of a screwdriver or trimming
key and bottom adjustment by means
of a key as shown in Fig.7.
For outline drawings and dimensions
see Figs 1, 2 and 3.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Cmin/Cmax 2.5/15 to 7/105 pF
Rated voltage (DC) 150 V
Test voltage (DC) for 1 minute 300 V
Maximum contact resistance 10 mΩ
Minimum insulation resistance 10000 MΩ
Category temperature range:
PP −40 to +70 °C
PC, PTFE −40 to +85 °C
Climatic category (IEC 60068):
PP 40/070/21
PC, PTFE 40/085/21
Minimum storage temperature −55 °C
Related specification IEC 60418-1 and 4
QUALITY LEVEL
Sampling and data evaluation for quality level in accordance with
“MIL-STD-105D”
and
“IEC 60410”
:
<0.15% major defects
<0.65% minor defects.
Each capacitor is tested for minimum Cmax and is also subjected to the full
test voltage.
MECHANICAL DATA
DESCRIPTION VALUE
Effective angle of rotation 180°
Operating torque 2 to 25 mNm
Maximum axial thrust 2 N
1998 Mar 27 23
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅10 mm
Fig.1 Trimmers 2222 808 ..... series, vertical version.
handbook, full pagewidth
5
±0.1
5.85 ±0.2
3 ±0.2
0.6 ±0.1
4
±0.5
0.65
±0.2
0.5
±0.15
10.6
max.
11
max.
1.15 max.
15.3 0
−1
∅2.5
∅1.6
∅2
10 0
−0.2 2.5
0.4 max.
Z
stator
rotor (2×)
0.6
0.7
1
5.8
DETAIL Z
turned 90°
ROUND HEAD EXTENDED HEXAGONAL HEAD
CCB140
Dimensions in mm.
Hole pattern 5 mm ×10 mm; see Fig.4.
1998 Mar 27 24
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅10 mm
Fig.2 Trimmers 2222 808 ..... series, vertical version.
handbook, full pagewidth
5
±0.1
5.85 ±0.2
3 ±0.2
0.6 ±0.1
4
±0.5
0.85
max.
0.5
±0.15
10.6
max.
11
max.
1.15 max.
15.3 0
−1
∅2.5
∅1.6
∅2
10 0
−0.2 2.5
Z
stator
rotor (2×)
0.6
0.7
1
5.8
DETAIL Z
turned 90°
ROUND HEAD EXTENDED HEXAGONAL HEAD
CCB141
Dimensions in mm.
Hole pattern 7.5 mm ×5 mm; see Fig.5.
1998 Mar 27 25
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅10 mm
handbook, full pagewidth
5
±0.1
3 0.2
4 ±0.5
4.8
±0.2
3.1 ±0.3
110° ±5°
6.5 ±0.1
11
max.
11 max.
1.15 max.
15.3 0
−1
∅2.5 ∅2
10 0
−0.2 2.5
Zstator
rotor (2×)
0.6
0.7
1
5.8
ROUND HEAD EXTENDED HEXAGONAL HEAD
0.6 ±0.1
0.85
max.
0.5
±0.15
∅1.6
DETAIL Z
turned 90°
CCB142
Fig.3 Trimmers 2222 808 ..... series, horizontal version.
Dimensions in mm.
Hole pattern 5 mm ×10 mm; see Fig.6.
1998 Mar 27 26
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅10 mm
Fig.4 Hole pattern; see Fig.1.
Dimensions in mm.
R = rotor, S = stator.
The large hole is for bottom adjustment and the diameter
is determined by user’s requirements.
handbook, halfpage
10
5
1.3
RR
S
5
CCB143
Fig.5 Hole pattern; see Fig.2.
Dimensions in mm.
R = rotor, S = stator.
handbook, halfpage
5
1.3
RR
S
7.5
2.5
CCB144
Fig.6 Hole pattern; see Fig.3.
Dimensions in mm.
R = rotor, S = stator.
handbook, halfpage
10
5
1.3
RR
S
5
CCB145
Adjustment
For top adjustment a screwdriver or trimming key can be
used; for bottom adjustment a key is required as shown
in Fig.7.
Fig.7 Bottom adjustment key.
handbook, halfpage
∅3
2 min.
0.7 +0.1
0
0.6 +0.2
0
∅1.7 +0.1
0
CCB138
Dimensions in mm.
1998 Mar 27 27
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅10 mm
ORDERING INFORMATION
Table 1 Selection chart
Cmin/Cmax
(pF)
CATALOGUE NUMBER 2222 808 .....
HORIZONTAL VERSION VERTICAL VERSION
HOLE PATTERN
5mm×10 mm HOLE PATTERN
5mm×10 mm HOLE PATTERN
7.5 mm ×5mm
ROUND
HEAD HEX
HEAD ROUND
HEAD HEX.
HEAD ROUND
HEAD HEX.
HEAD ROUND
HEAD
TOP AND BOTTOM
ADJUSTMENT TOP AND BOTTOM ADJUSTMENT TOP
ADJUSTMENT
2.5/15 61159 −31159 −32159 −−
3/22.5 61229 −31229 −32229 −−
5.5/40 61409 −31409 −32409 −−
5.5/50 −−01029 −01006 −−
5.5/65 61659 64659 31659 34659 32659 −01001
6/80 61809 64809 31809 34809 32809 35809 −
7/105 61101 64101 31101 −32101 −−
6/120 −−31121 −−− −
MOUNTING
The trimmer can be mounted on printed-circuit boards with
a grid of 2.50 mm or 2.54 mm and a minimum hole
diameter of 1.25 mm. For hole patterns
see Figs 4, 5 and 6.
PACKAGING
Bulk packaged in cardboard boxes lined with expanded
plastic. For smallest packaging quantities (SPQ)
see Table 2.
1998 Mar 27 28
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅10 mm
ELECTRICAL DATA
Table 2 Electrical characteristics and catalogue numbers
GUARANTEED
MAX. Cmin/
MIN. Cmax
at 200 kHz
(pF)
SPINDLE SHAPE
OF
HEAD FIG. ADJ.
MODE DIEL.
tan δat
Cmax ×10−4TEMP.
COEFF.
(10−6/K)
MIN. fres
at Cmax
(MHz)
COL.
OF
BASE SPQ CATALOGUE
NUMBER
1 MHz 100 MHz
2.5/15 vertical round 1top + bottom PP ≤10 ≤25 −200 ±700 420 blue 800 2222 808 31159
2 800 2222 808 32159
horizontal 3 700 2222 808 61159
3/22.5 vertical round 1top + bottom PP ≤10 ≤25 −200 ±700 200 green 800 2222 808 31229
2 800 2222 808 32229
horizontal 3 700 2222 808 61229
5.5/40 vertical round 1top + bottom PP ≤10 ≤25 −200 ±400 200 grey 800 2222 808 31409
2 800 2222 808 32409
horizontal 3 700 2222 808 61409
5.5/50 vertical round 1top + bottom PTFE ≤10 ≤25 −200 ±400 170 yellow 800 2222 808 01029
2 800 2222 808 01006
5.5/65 vertical
round 2 top
PP ≤10 ≤25 −200 ±500 170 yellow
800 2222 808 01001
round 1
top + bottom
800 2222 808 31659
round 2 800 2222 808 32659
hexag. 1 700 2222 808 34659
horizontal round 3 700 2222 808 61659
hexag. 3 600 2222 808 64659
6/80 vertical
round 1
top + bottom PC ≤70 −−50 ±400 170 red
800 2222 808 31809
hexag. 1 700 2222 808 34809
round 2 800 2222 808 32809
hexag. 2 700 2222 808 35809
horizontal round 3 700 2222 808 61809
hexag. 3 600 2222 808 64809
7/105 vertical round 1
top + bottom PC ≤70 −−50 ±400 170 violet
800 2222 808 31101
round 2 800 2222 808 32101
horizontal round 3 700 2222 808 61101
hexag. 3 600 2222 808 64101
6/120 vertical round 2 top + bottom PC ≤70 −−50 ±400 170 violet 800 2222 808 31121
1998 Mar 27 29
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅10 mm
TESTS AND REQUIREMENTS
Table 3 Test procedures and requirements
IEC
60418-1
CLAUSE
IEC
60068
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
4.2 method of mounting method A
14 capacitance drift after TC measurement ∆C/C: ≤4.5% for Cmax <40 pF;
∆C/C: ≤2.5% for Cmax ≥40 pF
19 thrust axial thrust of 2 N ∆C/C: ≤0.3%
21 robustness of terminations:
21.1 Ua tensile 1 N no damage
21.2 Ub bending 1 cycle no damage
22 Na rapid change of
temperature 1 cycle; 0.5 hours at lower
and 0.5 hours at upper
category temperature
∆C/C: ≤1.5%
23 T soldering:
Ta solderability solder bath immersion
3 mm; 235 °C; 2 s good wetting
no mechanical damage
Tb resistance to heat solder bath: 260 °C; 10 s no mechanical damage
24 Eb impact bump 4000 ±10 bumps;
40 g; 6 ms ∆C/C: ≤0.4%;
no mechanical damage
25 Fc vibration frequency 10 to 55 Hz;
amplitude 0.35 mm;
1.5 hours
∆C/C: ≤0.8%;
no mechanical damage
26 climatic sequence: ∆C/C: ≤3% for Cmax <80 pF;
∆C/C: ≤6% for Cmax ≥80 pF
26.1 B dry heat 16 hours at upper category
temperature tan δ: ≤15 ×10−4 for Cmax <80 pF;
tan δ: ≤80 ×10−4 for Cmax ≥80 pF
Rins:≥10000 MΩ;
rotor contact R: ≤10 mΩ
26.2 D damp heat accelerated,
first cycle 1 cycle; 24 hours; +40 °C;
95 to 100% RH voltage proof:
300 V for 1 minute
26.3 Aa cold 16 hours; −40 °C visual examination:
no mechanical damage
26.5 damp heat accelerated,
remaining cycles 1 cycle; 24 hours; +40 °C;
95 to 100% RH operating torque: 2 to 35 mNm
1998 Mar 27 30
Philips Components Preliminary specification
Film dielectric trimmers 2222 808 .....
∅10 mm
27 Ca damp heat steady state 21 days; +40 °C;
90 to 95% RH ∆C/C:
≤3% for Cmax <100 pF;
≤3.5% for Cmax ≥100 pF
tan δ:≤20 ×10−4for Cmax <80 pF;
tan δ: ≤80 ×10−4 for Cmax ≥80 pF
Rins:≥10000 MΩ;
rotor contact R: ≤10 mΩ
voltage proof:
300 V for 1 minute
visual examination:
no mechanical damage
operating torque: 2 to 35 mNm
29 mechanical endurance 10 cycles ∆C/C: ≤1%
∆C/C after axial thrust: ≤0.4%;
rotor contact R: ≤10 mΩ
voltage proof:
300 V for 1 minute
visual examination:
no mechanical damage
operating torque: 1.5 to 37 mNm
IEC
60418-1
CLAUSE
IEC
60068
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
