PRODUCT DESCRIPTION
Ultrajet 70 is an economical general-purpose
duster with a new BIGGER blast for
electronic applications. Its exceptional purity
jet instantly cleans surfaces free of particulate
contamination. Ultrajet 70 is engineered to
remove dirt, dust, oxide particles and other
airborne particles instantly, and can be used
to facilitate the accelerated drying of solvent
cleaners.
Filtered to 0.2 microns
Ozone safe; CFC and HCFC free
Nonflammable; may be use d on
energized equipment
Nonabrasive; safe for most materials.
Will not scratch surfaces
No residue
Cleans hard to reach areas
TYPICAL APPLICATIONS
Ultrajet 70 is used in a wide range of
applications including:
Audio/Video Equipment
Fax Machines
Keyboards
Laboratory Instruments
Microcomputers
Photo Equipment
Printers
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point -15.7°F
Vapor Density (air=1)
@ 77°F
3.18
Solubility in Water
@ 77°F F/1 atm
0.10% by weight
Specific Gravity
(water = 1 @77
°
F) 1.21
Evaporation Rate >1
(butyl acetate=1)
Appearance
Clear, Colorless Gas
Odor Slight Ethereal
Surface Tension
(dynes/cm @77
°
F) 7.8
Flash Point (TCC) None
Shelflife 5 years
COMPATIBILITY
Ultrajet 70 is generally compatible with
most materials used in printed circuit board
fabrication, including sensitive plastics and
compounds. As with any duster/cleaner,
compatibility must be determined on a non-
critical area prior to use.
TDS # 1015
CHEMTRONICS
Technical Data Sheet
Ultrajet
70
Material
Compatibility
Buna-N
Excellent
Graphite
Excellent
HDPE
Excellent
LDPE
Excellent
Lexan
Excellent
Neoprene
Excellent
Cross-Linked PE
Excellent
Polyacrylate
Excellent
Polystyrene
Excellent
PVC
Excellent
Silicone Rubber
Excellent
Teflon
Excellent
Viton
Excellent
PERFORMANCE
Press ure PSIG / Temperature F
-
P
S
-
I
G
-
-
20
40
60
80
100
120
140
Temperature F
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
No special surface preparation is required
prior to using Ultrajet 70. Direct high
pressure spray onto the area to be clea ned to
remove dust, dirt and other contaminant. For
optimum perfor mance and pin point c ontrol,
use with the attached extension tube.
AVAILABILITY
ES1015 10 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. T he toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC
0.0%
VOC
0.0%
HCFC
0.0%
HFC
100.0%
CL Solv.
0.0%
ODP
0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of
this product is 0.0. It is the sum of the ODP of the
substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
NOTE:
This information is believed to be accurate. It is intended
for professional end users having t he skills to evaluate and
use the data properly. CHEMTRONICS does not
guarantee the accuracy of the data and assumes no liability
in connection with damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. F (08/13)
DISTRIBUTED BY: