76mm (3.0INCH) SINGLE DIGIT DISPLAY Part Number: SC30-21GWA Green Features Description z 3.0 inch digit height. The Green source color devices are made with Gallium z Low current operation. Phosphide Green Light Emitting Diode. z Excellent character appearance. z Easy mounting on P.C. boards or sockets. z Categorized for luminous intensity. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAM8236 REV NO: V.1A DATE: JAN/12/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1301003366 Selection Guide Part No. Dice SC30-21GWA Lens Type Green (GaP) Iv (mcd) [1] @ 10mA Description Min. Typ. 21 52 *5.6 *16 White Diffused Common Cathode , Rt.Hand Decimal. Notes: 1. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Per segment or (DP and Comma) Green 13.2 (4.4) 15.0 (5.0) V IF=20mA IR Reverse Current Per segment or (DP and Comma) Green 10 (10) uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation Per segment or (DP and Comma) 375 (125) mW DC Forward Current Per segment or (DP and Comma) 25 (25) mA Peak Forward Current [1] Per segment or (DP and Comma) 140 (140) mA Reverse Voltage Per segment or (DP and Comma) 5 (5) V Operating / Storage Temperature Lead Solder Temperature[2] -40C To +85C 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAM8236 REV NO: V.1A DATE: JAN/12/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1301003366 Green SC30-21GWA SPEC NO: DSAM8236 REV NO: V.1A DATE: JAN/12/2013 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1301003366 SPEC NO: DSAM8236 REV NO: V.1A DATE: JAN/12/2013 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1301003366 PACKING & LABEL SPECIFICATIONS SC30-21GWA SPEC NO: DSAM8236 REV NO: V.1A DATE: JAN/12/2013 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1301003366 SPEC NO: DSAM8236 REV NO: V.1A DATE: JAN/12/2013 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1301003366 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAM8236 REV NO: V.1A DATE: JAN/12/2013 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1301003366