E/H (Military M/D55342) Vishay Thin Film QPL MIL-PRF-55342 Qualified Thin Film Resistor Chips FEATURES * Established reliability, "R" failure rate level (100 ppm), C = 2 SURFACE MOUNT CHIPS * High purity alumina substrate 99.6 % purity * Wraparound termination featuring a tenacious adhesion layer covered with an electroplated nickel barrier layer for + 150 C operating conditions Actual Size M55342/02 * Very low noise and voltage coefficient (< - 25 dB, 0.5 ppm/V) Thin Film Mil chip resistors feature all sputtered wraparound termination for excellent adhesion and dimensional uniformity. They are ideal in applications requiring stringent performance requirements. Established reliability is assured through 100 % screening and extensive environmental lot testing. Wafer is sawed producing exact dimensions and clean, straight edges. Note * Specification changed MIL-PRF-55342 by DSCC from MIL-R-55342 * Non-inductive * Laser-trimmed tolerances 0.1 % * Wraparound resistance less than 0.010 typical * In-lot tracking less than 5 ppm/C * Complete MIL-testing available in-house * Antistatic waffle pack or tape and reel packaging available to * Military/aerospace/QPL CONSTRUCTION TYPICAL PERFORMANCE ABS Passivation Resistor film Solder coating TCR 25 TOL 0.1 Nickel barrier High ourity alumina substrate Adhesion layer STANDARD ELECTRICAL SPECIFICATIONS Test Material Absolute TCR SPECIFICATIONS CONDITIONS Passivated nichrome 25 ppm/C to 300 ppm/C TCR - 55 C to + 125 C Absolute Tolerance 0.1 % + 25 C Stability: R Absolute 0.1 % 2000 h at + 70 C Voltage Coefficient 0.5 ppm/V Operating Temperature Range - 55 C to + 125 C Storage Temperature Range - 55 C to + 150 C Noise Shelf Life Stability www.vishay.com 50 - 25 dB 100 ppm For technical questions, contact: thin-film@vishay.com 1 year at + 25 C Document Number: 60018 Revision: 16-Sep-09 E/H (Military M/D55342) QPL MIL-PRF-55342 Qualified Thin Film Resistor Chips Vishay Thin Film DIMENSIONS D W T E L TERM. L W T D E M55342/01 B 0.055 0.006 0.025 0.005 0.010 to 0.030 0.010 0.005 0.015 0.005 M55342/02 B 0.055 0.006 0.050 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005 M55342/03 B 0.105 0.007 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 M55342/04 B 0.155 0.007 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 M55342/05 B 0.230 0.007 0.075 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 M55342/06 B 0.080 0.006 0.050 0.005 0.015 to 0.033 0.016 0.008 0.015 0.005 D55342/07 B 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010 M55342/08 B 0.209 + 0.009/- 0.018 0.098 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 M55342/09 B 0.259 + 0.009/- 0.015 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 M55342/10 B 0.105 0.007 0.100 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 M55342/11 B 0.040 0.005 0.025 0.005 0.010 to 0.030 0.010 0.005 0.015 0.005 M55342/12 B 0.064 0.006 0.032 0.005 0.010 to 0.033 0.012 0.005 0.015 0.005 CASE SIZE MAX. WORKING VOLTAGE POWER RATING (mW) E (0.1 %) E (1 %, 2 %, 5 %) H, K, M (0.1 %) H, K, M (1 %, 2 %, 5 %) M55342/01 40 50 49.9 to 150K 49.9 to 150K 20 to 150K 20 to 150K M55342/02 40 125 49.9 to 301K 49.9 to 301K 20 to 301K 20 to 301K M55342/03 75 200 49.9 to 649K 49.9 to 649K 10 to 649K 10 to 649K M55342/04 125 150 49.9 to 1.69M 49.9 to 1.69M 10 to 1.69M 10 to 1.69M M55342/05 175 225 49.9 to 3.16M 49.9 to 3.16M 10 to 3.16M 10 to 3.16M M55342/06 50 150 49.9 to 475K 49.9 to 475K 10 to 475K 10 to 475K D55342/07 100 250 49.9 to 1.5M 49.9 to 1.5M 10 to 1.5M 10 to 1.5M M55342/08 150 800 49.9 to 4.02M 49.9 to 4.02M 10 to 4.02M 10 to 4.02M M55342/09 200 1000 49.9 to 6.19M 49.9 to 6.19M 10 to 6.19M 10 to 6.19M M55342/10 75 500 49.9 to 1M 49.9 to 1M 49.9 to 1M 49.9 to 1M M55342/11 30 50 49.9 to 100K 49.9 to 100K 20 to 100K 20 to 100K M55342/12 50 100 49.9 to 258K 49.9 to 261K 10 to 258K 10 to 261K RESISTANCE RANGE () BY CHARACTERISTICS TOLERANCE Note * Values listed are a guide, refer to mil spec for value/tolerance allowance Document Number: 60018 Revision: 16-Sep-09 For technical questions, contact: thin-film@vishay.com www.vishay.com 51 SURFACE MOUNT CHIPS CASE SIZE E/H (Military M/D55342) QPL MIL-PRF-55342 Qualified Thin Film Resistor Chips Vishay Thin Film ENVIRONMENTAL TESTS TEST SURFACE MOUNT CHIPS MECHANICAL SPECIFICATIONS MIL-PRF-55342 VISHAY LIMITS PERFORMANCE (R ) (R ) Thermal Shock 0.1 % 0.020 % Low Temperature Operation 0.1 % 0.025 % Short Time Overload 0.1 % 0.050 % High Temperature Exposure 0.1 % 0.009 % Resistance to Bonding 0.2 % 0.006 % Moisture Resistance 0.2 % 0.004 % TCR 25 ppm/C < 15 ppm/C Life (2000 h at + 70 C) 0.5 % 0.0184 % Life (10 000 h at + 70 C) 2.0 % 0.04 % Resistive Element Passivated nichrome Substrate Material Alumina Chip Terminations Solder over nickel Fused Solder SN 60/40 FSCM CAGE # - 57489 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342E06B1C00RTS (preferred part number format) M 5 5 3 GLOBAL TCR MODEL CHARACTERISTIC M55342 or D55342 (/07 size only) E = 25 ppm/C H = 50 ppm/C K = 100 ppm/C M = 300 ppm/C 4 2 E 0 6 B 1 C 0 0 CASE SIZE TERMINATION OHMIC VALUE FAILURE RATE 01 = 0502 02 = 0505 03 = 1005 04 = 1505 05 = 2208 06 = 0705 07 = 1206 08 = 2010 09 = 2512 10 = 1010 11 = 0402 12 = 0603 B = Solderable Three digits and a letter. Letter identifies tolerance, acts as multiplier and decimal locator. M = 1.0 % per 1000 h P = 0.1 % per 1000 h R = 0.01 % per 1000 h C = Non ER version MULTIPLIER Tolerance 1 1 k 1 M 0.1 % A B C 1% D E F 2% G H T 5% J K L 10 % M N P R T S V THIN FILM CODE (1) PACKAGING Standard Packaging: BS = BULK 100 min. 1 mult WS = WAFFLE 100 min. 1 mult TAPE AND REEL T0 = 100 min. 100 mult T1 = 1000 min. 1000 mult T3 = 300 min. 300 mult T5 = 500 min. 500 mult TF = Full reel 4000 TS = 100 min. 1 mult V for K and M TCR W/tolerance 1% Special Packaging: WAFFLE WI = 100 min. 1 mult (item single lot date code) WP =100 min. 1 mult (package unit single lot date code) TAPE AND REEL TI = 100 min. 1 mult (item single lot date code) TP = 100 min. 1 mult (package unit single lot date code) Historical Part Number example: M55342 K 06 B 5E60 R SERIES TCR CHARACTERISTIC CASE SIZE TERMINATION VALUE AND TOLERANCE FAILURE RATE Note (1) Only add a V at the end of part number to specify Vishay Thin Film for K/M TCR and tolerance 1 % and higher www.vishay.com 52 For technical questions, contact: thin-film@vishay.com Document Number: 60018 Revision: 16-Sep-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1