RAST-2.5-Steckverbinder, Raster 2,5/5,0 mm RAST 2.5 connectors, pitch 2.5/5.0 mm Connecteurs RAST 2.5, pas 2,5/5,0 mm 3510 3510-1 3510-2 RAST-2.5-Steckverbinder fur direktes Stecken, in Schneidklemmtechnik (SKT), wahlweise mit oder ohne Kodiersteg und geschlossenen Seitenwanden Kontaktraster 2,5 mm 3510: fur Einzelleiter 3510-1: fur Rasterstegleitung, busfahig 3510-2: fur Rasterstegleitung 3510 *f X 3510-1 3510-2 X X 1. Temperaturbereich -40 C/+130 C1 2. Werkstoffe Kontakttrager 3510(-...) (S...V...) PBT, V0 nach UL 94 Kontakttrager 3510(-...) M12(S...V...)2 PA, V2 nach UL 94 Kontaktfeder 3510(-...) (M...S...) CuSn, verzinnt Kontaktfeder 3510(-...) (M...S...)V03 CuSn, verzinnt (Sn/Ag), 2- bis 9-polig Kontaktfeder 3510(-...) (M...S...)V102 CuSn, unternickelt und vergoldet 3. Mechanische Daten Steckkraft/Kontakt3 4,0 N Ziehkraft/Kontakt3 0,5 N Kontaktierung mit Leiterplatte 1,5 0,14 mm Anschliebare Leiter Schneidklemmbereich Querschnitt 3510(-...) (M...V...) 0,22-0,38 mm2 Querschnitt 3510(-...) (M...)S01(V...) 0,34 mm2 (7-drahtig) Querschnitt 3510(-...) (M...)S02(V...) 0,14-0,22 mm2 Querschnitt 3510(-...) (M...)S03(V...) Spezialanwendungen, z.B. Lackdraht Isolationsdurchmesser 1,6 mm Freigegebene Leitungen im Internet unter www.lumberg.com Kodiervorschlage im Internet unter www.lumberg.com 4. Elektrische Daten (bei TU 20 C) Durchgangswiderstand 5 m Bemessungsstrom 4 A bei TU 60 C 2 A bei TU 100 C Bemessungsspannung4 32 V AC Isolierstoffgruppe4 IIIa (IEC)/2 (UL) (CTI 250) Kriechstrecke 0,6 mm Luftstrecke 0,6 mm Isolationswiderstand > 1 G 1 obere Grenztemperatur (Kontakttrager) RTI (elektr.) der UL Yellow Card 2 Bauteil gluhdrahtbestandig (GWT 750 C), Prufung nach IEC 60695-2-11, Beurteilung nach IEC 60335-1 (Flamme < 2 s) 3 gemessen mit einem polierten Stahlstift, Nennma 1,5 mm 4 nach IEC 60664/DIN EN 60664/CTI UL-Klassifikation nach ANSI/UL 746A (R) (R) Reg.-Nr. 6937 3510 (R) Reg.-Nr. 6937 3510-2 *a konfektionierter Zustand terminated connector connecteur apres montage *b Farbkennzeichnung: 3510(-...) (M...)S01(V...) blau/blue/bleu color marking: 3510(-...) (M...)S02(V...) grun/green/vert 3510(-...) (M...)S03(V...) braun/brown/marron marque en couleur: *c K = Kodierung (wahlweise) K = keying (alternatively) K = codage (au choix) P1, P2 = Positionierung (wahlweise) P1, P2 = positioning (alternatively) P1, P2 = positionnement (au choix) *d Leiterplattenbeispiel example for printed circuit board exemple de carte imprimee *e Verkettung der Bauteile (Lieferzustand) chaining of the component parts (state of delivery) composants en bande (etat de livraison) *f Kodierbeispiel mit geschlossenen Seitenwanden keying example with closed sides exemple de codage aux parois laterales fermees www.lumberg.com 11/2012 RAST-2.5-Steckverbinder, Raster 2,5/5,0 mm RAST 2.5 connectors, pitch 2.5/5.0 mm Connecteurs RAST 2.5, pas 2,5/5,0 mm 3510 3510-1 3510 3510-1 3510-2 3510-2 RAST 2.5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without keying rib and closed sides contact pitch 2.5 mm 3510: for individual conductors 3510-1: for ribbon cable, daisy chain possible 3510-2: for ribbon cable Connecteur RAST 2.5 pour enfichage direct, technologie de deplacement d'isolant, au choix avec ou sans cloison de codage et parois laterales fermees pas des contacts 2,5 mm 3510: pour conducteurs individuels 3510-1: pour cable plat, pour transistion 3510-2: pour cable plat 1. Temperature range -40 C/+130 C1 2. Materials Insulating body 3510(-...) (S...V...) PBT, V0 according to UL 94 Insulating body 3510(-...) M12(S...V...)2 PA, V2 according to UL 94 Contact spring 3510(-...) (M...S...) CuSn, tinned Contact spring 3510(-...) (M...S...)V03 CuSn, tinned (Sn/Ag), 2-9 poles Contact spring 3510(-...) (M...S...)V102 CuSn, pre-nickeled and gilded 3. Mechanical data Insertion force/contact3 4.0 N Withdrawal force/contact3 0.5 N Mating with printed circuit board 1.5 0.14 mm Connectable conductors insulation displacement terminal Section 3510(-...) (M...V...) 0.22-0.38 mm2 Section 3510(-...) (M...)S01(V...) 0.34 mm2 (7 wires) Section 3510(-...) (M...)S02(V...) 0.14-0.22 mm2 Section 3510(-...) (M...)S03(V...) special applications, e.g. varnished wire Insulation diameter 1.6 mm Approved cables on the Internet site www.lumberg.com Proposed keyings on the Internet site www.lumberg.com 4. Electrical data (at Tamb 20 C) Contact resistance 5 m Rated current 4 A at Tamb 60 C 2 A at Tamb 100 C Rated voltage4 32 V AC Material group4 IIIa (IEC)/2 (UL) (CTI 250) Creepage distance 0.6 mm Clearance 0.6 mm Insulation resistance > 1 G 1 upper limit temperature (insulating body) RTI (electr.) acc. to UL Yellow Card 2 component glow wire resistant (GWT 750 C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s) 3 measured with a polished steel pin, nominal thickness 1.5 mm 4 acc. to IEC 60664/DIN EN 60664/CTI UL classification acc. to ANSI/UL 746A 1. Temperature d'utilisation -40 C/+130 C1 2. Materiaux Corps isolant 3510(-...) (S...V...) PBT, V0 suivant UL 94 Corps isolant 3510(-...) M12(S...V...)2 PA, V2 suivant UL 94 Ress. de cont. 3510(-...) (M...S...) CuSn, etame Ress. de cont. 3510(-...) (M...S...)V03 CuSn, tinned (Sn/Ag), 2-9 poles Ress. de cont. 3510(-...) (M...S...)V102 CuSn, Sous-nickele et dore 3. Caracteristiques mecaniques Force d'insertion/contact3 4,0 N Force de separation/contact3 0,5 N Raccordement avec carte imprimee 1,5 0,14 mm Conducteurs raccordables a deplacement d'isolant Section 3510(-...) (M...V...) 0,22-0,38 mm2 Section 3510(-...) (M...)S01(V...) 0,34 mm2 (7 brins) Section 3510(-...) (M...)S02(V...) 0,14-0,22 mm2 Section 3510(-...) (M...)S03(V...) applications speciaux, p. ex. fils laques Diametre d'isolement 1,6 mm Cables approuves sur Internet a l'adresse www.lumberg.com Codages proposes sur Internet a l'adresse www.lumberg.com 4. Caracteristiques electriques (a Tamb 20 C) Resistance de contact 5 m Courant assigne 4 A a Tamb 60 C 2 A a Tamb 120 C 4 Tension assignee 32 V AC Groupe de materiau4 IIIa (CEI)/2 (UL) (CTI 250) Distance d'isolement 0,6 mm Ligne de fuite 0,6 mm Resistance d'isolement > 1 G 1 temperature limite superieure (corps isolant) RTI (electr.) suivant UL Yellow Card 2 composant resistant a fil incandescant (GWT 750 C), essai suivant CEI 60695-2-11, evaluation suivant CEI 60335-1 (flamme < 2 s) 3 mesuree avec une tige d'acier poli, epaisseur nominale 1,5 mm 4 suivant CEI 60664/DIN EN 60664/CTI UL classification suivant ANSI/UL 746A Bestellbezeichnung* Designation* Designation* 3510 3510 3510 3510 3510 3510 3510 3510 3510 3510 3510 3510 3510 3510 3510 3510 3510 3510 3510 * 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 3510-1 3510-1 3510-1 3510-1 3510-1 3510-1 3510-1 3510-1 3510-1 02 03 04 05 06 07 08 09 10 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 3510-2 Polzahl Verpackungseinheit Poles Package unit Poles Unite d'emballage 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 4950 3600 2700 2250 1800 1800 1350 1350 1350 900 900 900 900 900 450 450 450 450 450 Abmessungen Dimensions Dimensions A (mm) B (mm) C (mm) E (mm) F (mm) 2,5 5,0 7,5 10,0 12,5 15,0 17,5 20,0 22,5 25,0 27,5 30,0 32,5 35,0 37,5 40,0 42,5 45,0 47,5 7,4 9,9 12,4 14,9 17,4 19,9 22,4 24,9 27,4 29,9 32,4 34,9 37,4 39,9 42,4 44,9 47,4 49,9 52,4 4,5 7,0 9,5 12,0 14,5 17,0 19,5 22,0 24,5 27,0 29,5 32,0 34,5 37,0 39,5 42,0 44,5 47,0 49,5 4,45 6,95 9,45 11,95 14,45 16,95 19,45 21,95 24,45 26,95 29,45 31,95 34,45 36,95 39,45 41,95 44,45 46,95 49,45 7,6 10,1 12,6 15,1 17,6 20,1 22,6 25,1 27,6 30,1 32,6 35,1 37,6 40,1 42,6 45,1 47,6 50,1 52,6 Die Bestellbezeichnung ist um weitere Angaben (z.B. Kodierung) zu erganzen, siehe Umschlaginnenseite, Seite 4.71 und Internet www.lumberg.com. Designation to be completed by further details (e.g. keying), see inner cover, page 4.71 and Internet site www.lumberg.com. Ajouter d'autres specifications (par exemple codage) a la designation, voir cote interieur de la couverture, page 4.71 et site Internet www.lumberg.com. Verpackung: verkettet, im Karton Packaging: chained, in a cardboard box Emballage: en bandes, dans un carton www.lumberg.com 11/2012