ACA2420 24V, 1000 MHz, 21.5dB Gain High Output Power Doubler Line Amplifier ADVANCED PRODUCT INFORMATION - Rev 0.1 FEATURES * 21.5 dB Gain * 75 V input and output match * Characterized at +58dBmV output power * Superior gain flatness (+ 0.2dB) * Very Low Distortion * Stable with High VSWR Load Conditions * Monolithic GaAs Design for Consistent Performance Part-to-Part * Surface Mount Package Compatible with Automatic Assembly * RoHS Compliant Package APPLICATIONS * S7 Package 16 Pin Wide Body SOIC with Heat Slug CATV Line Amplifiers, Deep Fiber Nodes PRODUCT DESCRIPTION The ACA2420 is a highly linear, monolithic GaAs RF amplifier that has been developed to replace, in new designs, standard CATV hybrid amplifiers. Offered in a convenient surface mount package, the MMIC consists of two pairs of parallel amplifiers that are optimized for exceptionally low RF Input distortion. A hybrid equivalent that provides flat gain response and excellent input and output return loss over the 40 to 1000 MHz CATV downstream band is formed when one ACA2420 is cascaded between two appropriate transmission line baluns. 1A 2A 1B 2B ACA2420 Figure 1: Hybrid Application Diagram 07/2008 RF Output ACA2420 1 GND GND 16 2 2A IN 1A OUT 15 3 GND Bias 1A 14 4 1A IN 2A OUT 13 5 1B IN 2B OUT 12 6 I SET Bias 1B 11 7 2B IN 1B OUT 10 8 GND GND 9 Figure 2: Pin Out Table 1: Pin Description 2 PIN NAME 1 GND 2 DESCRIPTION PIN NAME Ground 9 GND Ground 2AIN Amplifier 2A Input 10 1BOUT Amplifier 1B Output 3 GND Ground 11 Bias 1B 4 1AIN Amplifier 1A Input 12 2BOUT Amplifier 2B Output and Supply 5 1BIN Amplifier 1B Input 13 2AOUT Amplifier 2A Output and Supply 6 ISET Current Adjust 14 Bias 1A 7 2BIN Amplifier 2B Input 15 1AOUT Amplifier 1A Output 8 GND Ground 16 GND Ground ADVANCED PRODUCT INFORMATION - Rev 0.1 07/2008 DESCRIPTION Bias for 1B Amplifier Bias for 1A Amplifier ACA2420 ELECTRICAL CHARACTERISTICS Table 2: Absolute Mimimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply (pins 12, 13) 0 +28 VDC Current Adjust (pin 6) 0 +4 VDC RF Power at Inputs (pins 4, 5) - +75 dBmV -65 +150 C Soldering Temperature - +260 C Soldering Time - 5.0 Sec Storage Temperature Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Notes: 1. Pins 2, 4, 5 and 7 should be AC-coupled. No external DC bias should be applied. 2. Pin 6 should be AC-grounded and/or pulled to ground through a resistor for current control. 3. Pins 11 and 14 are bias feeds for input amplifiers 1A and 1B. No external DC bias should be applied. 4. Pins 10 and 15 receive DC bias directly from pins 11 and 14. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Supply: VDD (pins 12, 13) - +24 - VDC Current Adjust (pin 6) - +1.5 - VDC RF Frequency 40 - 1000 MHz Case Temperature -40 - +110 C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. ADVANCED PRODUCT INFORMATION - Rev 0.1 07/2008 3 ACA2420 Table 4: AC and DC Electrical Specifications (Ta = +25 C, Vdd = +24 VDC) PARAMETER MIN TYP MAX UNIT Gain (1) @ 870 MHz (1) - 21.5 - dB Cable Equivalent Slope (1) - 0 - dB Gain Flatness (1) to 1000 MHz - 0.2 - dB Noise Figure - 6.5 - dB CTB (1) 77 Channels (2) 77 Channels (3) 110 Channels (4) - -78 -76 TBD TBD -74 - dBc CSO (1) 77 Channels (2) 77 Channels (3) 110 Channels (4) - -71 -69 -64 TBD -67 - dBc XMOD (1) 77 Channels (2) 77Channels (3) 110 Channels (4) - -64 -63 TBD -61 - dBc CIN (1) 77 Channels (3) 110 channels (4) - - -58 TBD dBc - -22 -20 dB 75 V system - -22 -22 -20 -18 dB 75 V system 495 520 545 mA - 2.7 3.3 (1) Return Loss (Input) (1) 40-1000 MHz Return Loss (Output) (1) 40-900 MHz 901-1000 MHz Supply Current Thermal Resistance o COMMENTS C/W Notes: (1) Measured with baluns on the input and output of the device. (2) Parts measured with 77 channels, +58 dBmV power, 15.5 dB tilt at 1000 MHz. (3) Parts measured with 77 channels, +58 dBmV power, 15.5 dB tilt at 1000 MHz, plus QAM to 1GHz. (4) Parts measured with 110 channels, +56 dBmV power, 15.5 dB tilt at 1000 MHz, plus QAM to 1GHz. (5) All specifications as measured on Evaluation Board (see Figures 13 & 14). 4 ADVANCED PRODUCT INFORMATION - Rev 0.1 07/2008 ACA2420 Figure 3: Gain (S21) vs Frequency (Ta=+25 C, Vdd=+24 V, 75 ohm system) 23 22.5 22 Gain (dB) 21.5 21 20.5 20 19.5 19 18.5 18 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 Frequency (MHz) Figure 3: Gain (S21) vs Frequency (TInput A=+25 C, VDD=+24 V, 75 ohm system) Figure 4: and Output Return Loss (S11 and S22) vs. Frequency O (Ta=+25 C, Vdd= +24 V, 75 ohm system) 0 -5 S22 Return Loss (dB) -10 S11 -15 -20 -25 -30 -35 -40 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 Frequency (MHz) Figure 4: Input and Output Return Loss (S11 and S12) vs. Frequency (TA=+25 OC, VDD=+24 V, 75 ohm system) ADVANCED PRODUCT INFORMATION - Rev 0.1 07/2008 5 ACA2420 Figure 5: Isolation (S12) vs. Frequency (Ta=+25 C, Vdd=+24 V, 75 ohm system) 0 -5 -10 Isolation (dB) -15 -20 -25 -30 -35 -40 -45 -50 0 300 600 900 1200 1500 1800 2100 Frequency (MHz) Figure 5: Isolation (S12) vs. Frequency (TA=+25 OC, VDD=+24 V, 75 ohm system) 6 ADVANCED PRODUCT INFORMATION - Rev 0.1 07/2008 2400 2700 3000 ACA2420 APPLICATION INFORMATION TVS C15 C11 R3 C14 Figure 6: Evaluation Board Layout +24 V TVS + C15 C10 C4 RF Input L3 C6 ACA2420 T1 L1 C1 C11 C2 C8 T2 C9 RF Output C7 C3 R3 C5 L2 L4 C14 +24 V Figure 7: Evaluation Board Schematic ADVANCED PRODUCT INFORMATION - Rev 0.1 07/2008 7 ACA2420 Table 5: Evaluation Board Parts List REF DESCRIPTION QTY VENDOR VENDOR P/N C1, C2, C3, C6, C7, C10, C14 0.01 F CHIP CAP 7 MURATA GRM39X7R103K50V C4, C5, C8, C9 270 pF CHIP CAP 4 MURATA GRM39X7R271K50V C11 1.0 pF CHIP CAP 1 MURATA GRM36COG0R5C50 C15 47 F ELECT CAP 1 DIGI-KEY CORP P5275-ND C12, C13, R2, R3 NOT USED TVS TVS 24 VOLT 600 WATT 1 DIGI-KEY CORP SMBJ24ACCCT-ND L1, L2, L3, L4 470 nH INDUCTOR 4 MURATA LQH1WA47KONO003/4052 R3 15 K V - CONNECTOR (1) 75 V N MALE PANEL MOUNT 2 PASTERNACK ENTERPRISES PE4504 T1, T2 Balun 2 M/A-COM MABA-009210-CT1760 1 STANDARD PRINTED CIRC. INC. 24VX1AC50 1 INDIUM CORP OF AMERICA 14996Y Printed Circuit Board INDIUM 300 X 160 MILS (3) - - Notes: (1) N connector center pin should be approximately 80 mils in length. (2) T1, T2, balun: 5.5 turns thru, as shown in Figure 15. (3) Due to the power dissipation of this device, the printed circuit board should be mounted / attached to a heat sink. SCHEMATIC Note: See M/A-COM's data sheet for more details. 8 TOP VIEW Figure 4: Balun Drawing ADVANCED PRODUCT INFORMATION - Rev 0.1 07/2008 SIDE VIEW ACA2420 PACKAGE OUTLINE Figure 5: S7 Package Outline - 16 Pin Wide Body SOIC with Heat Slug ADVANCED PRODUCT INFORMATION - Rev 0.1 07/2008 9 ACA2420 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING ACA2420RS7P2 -40 C to +110 C 16 Pin Wide Body SOIC with Heat Slug Tape and Reel, 1500 pieces per Reel ACA2420RS7P0 -40 C to +110 C 16 Pin Wide Body SOIC with Heat Slug Plastic Tubes, 25 pieces per Tube ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. warning ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 10 ADVANCED PRODUCT INFORMATION - Rev 0.1 07/2008