Click on Series name for product info on aimtec.com Series AM8T-IZ 8 Watt | DC-DC Converter FEATURES: * * * * * * * * RoHS compliant 24 Pin DIP Package Wide 2:1 input range Power modules for PCB mounting Operating temperature -40C to + 75C Regulated output Low ripple and noise Input/output Isolation voltage 1500VDC Models Single output Model AM8T-0503SIZ AM8T-0505SIZ AM8T-0512SIZ AM8T-0515SIZ AM8T-1203SIZ AM8T-1205SIZ AM8T-1212SIZ AM8T-1215SIZ AM8T-2403SIZ AM8T-2405SIZ AM8T-2412SIZ AM8T-2415SIZ AM8T-4803SIZ AM8T-4805SIZ AM8T-4812SIZ AM8T-4815SIZ Input Voltage (V) Input Current FL | NL (mA) Output Voltage (V) Output Current max (mA) Max Capacitive Load (uF) Ripple & Noise max (mV p-p) Efficiency (%) 4.5-9 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 1427 | 50 2133 | 50 2084 | 30 2092 | 30 579 | 50 833 | 50 805 | 30 808 | 30 278 | 40 407 | 40 388 | 30 399 | 30 141 | 30 203 | 30 201 | 20 200 | 20 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 1600 1600 660 530 1600 1600 660 530 1600 1600 660 530 1600 1600 660 530 2200 1000 330 220 2200 1000 330 220 2200 1000 330 220 2200 1000 330 220 80 80 120 150 80 80 120 150 80 80 120 150 80 80 120 150 74 75 76 76 76 80 82 82 79 82 85 83 78 82 82 83 Models Dual output Model AM8T-0505DIZ AM8T-0512DIZ AM8T-0515DIZ AM8T-1205DIZ AM8T-1212DIZ AM8T-1215DIZ AM8T-2405DIZ AM8T-2412DIZ AM8T-2415DIZ AM8T-4805DIZ AM8T-4812DIZ AM8T-4815DIZ Input Voltage (V) Input Current FL | NL (mA) Output Voltage (V) Output Current max (mA) Max Capacitive Load (uF) Ripple & Noise max (mV p-p) Efficiency (%) 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75 2162 | 30 2057 | 30 1975 | 30 844 | 30 795 | 30 802 | 30 422 | 30 398 | 30 392 | 30 216 | 20 201 | 20 203 | 20 5 12 15 5 12 15 5 12 15 5 12 15 800 330 260 800 330 260 800 330 260 800 330 260 680 220 100 330 220 100 330 220 100 330 220 100 80 120 150 80 120 150 80 120 150 80 120 150 74 77 79 79 83 81 79 83 83 77 82 80 Input Specifications Parameters Voltage range Filter www.aimtec.com F 051e R6.H Nominal 5 12 24 48 Typical 4.5-9 9-18 18-36 36-75 (Pi) Network Tel: +1 514 620 2722 1 of 4 Maximum Units VDC Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM8T-IZ 8 Watt | DC-DC Converter 5 Vin 12 Vin 24 Vin 48 Vin Absolute Maximum Rating 16 25 50 100 100 Permissible absolute maximum duration VDC ms Isolation Specifications Parameters Conditions Tested I/O voltage Resistance Capacitance Typical Rated Units 1500 VDC MOhm pF Maximum Units 60 sec > 1000 256 Output Specifications Parameters Conditions Voltage accuracy Short Circuit protection Short Circuit restart Over voltage protection Over load protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Typical 2 Auto recovery HL-LL HL-LL 25 - 100% load 25 - 100% load % Continuous Auto recovery Zener diode clamp Over 110% full load 0.5 0.5 0.5 2 0.05 % % % % %/C General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum Case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load Derating above +70 oC 300 Maximum -40 to +75 -55 to +115 +95 Units KHz C C C Free air convection 95 Nickel coated cooper % 33 g Tolerance 0.02 inch, 0.5mm 1.25 x 0.80 x 0.42 inches 31.80 x 20.30 x 10.80 mm > 800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Standards Agency approvals Safety www.aimtec.com F 051e R6.H CE EN 55022: 2006 + A1: 2007 EN 55024: 1998 + A1:2001 + A2:2003 IEC 61000-4-2: 2008 IEC 61000-4-3: 2006 + A1: 2007 IEC 61000-4-4: 2004 IEC 61000-4-6: 2008 IEC 61000-4-8: 2009 Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM8T-IZ 8 Watt | DC-DC Converter Dimensions Dual 2 3 9 10 11 14 15 16 22 23 -V Input -V Input N.C. Omitted N.C. +V Output Omitted -V Output +V Input +V Input -V Input -V Input Common Omitted -V Output + V Output Omitted Common +V Input +V Input 0.50 (0.02) 2 F 051e R6.H 3 9 11 Bottom View 23 22 2.50 (0.10) 16 14 5.00 (0.20) Printed Face Tolerance 0.02 inch, 0.5mm 3.80 (0.15) Block Diagrams www.aimtec.com 22.80 (0.90) 20.30 (0.80) Single 10.80 (0.42) Pin 31.80 (1.25) 15.20 (0.60) Pin Out Specifications Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM8T-IZ 8 Watt | DC-DC Converter Derating B 100 LFM 75 C A Free Air 70 C D 400 LFM 85 C C 200 LFM 80 C A B C D Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.H Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only