TNPW www.vishay.com Vishay Lead (Pb)-Bearing High Stability Thin Film Chip Resistors FEATURES * Metal film layer on high quality ceramic * SnPb termination plating, Pb content > 6 % * Excellent overall stability at different environmental conditions 0.05 % (1000 h rated power at 70 C) * Low temperature coefficient and tight tolerances ( 0.1 %; 10 ppm/K) * Single lot date code available APPLICATIONS * Military * Avionics * Industrial TNPW High Stability Thin Film Chip Resistors are the perfect choice for most fields of modern electronics where lead (Pb)-bearing terminations are mandatory and reliability and stability are of major concern. TECHNICAL SPECIFICATIONS TNPW0402 TNPW0603 TNPW0805 TNPW1206 TNPW1210 (1) 0402 0603 0805 1206 1210 Metric size code RR1005M RR1608M RR2012M RR3216M RR3225M Resistance range 10 to 100 k 10 to 332 k 10 to 1 M 10 to 2 M 10 to 3.01 M DESCRIPTION Imperial size Resistance tolerance 1 %; 0.5 %; 0.1 % Temperature coefficient 50 ppm/K; 25 ppm/K; 15 ppm/K; 10 ppm/K Climatic category (LCT/UCT/days) Rated dissipation, P70 (2) Operating voltage, Umax. ACRMS or DC 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 0.063 W 0.1 W 0.125 W 0.25 W 0.33 W 50 V 75 V 150 V 200 V 200 V Permissible film temperature, F max. 155 C Operating Temperature Range Thermal resistance (3) -55 C to 125 C (155 C) 870 K/W 550 K/W 440 K/W 220 K/W 170 K/W Uins 1 min 75 V 100 V 200 V 300 V 300 V Continuous 75 V 75 V 75 V 75 V 75 V Insulation voltage: Failure rate: FITobserved 0.3 x 10-9/h Notes (1) The detail specification EN140401-801 does not cover this product size. (2) Rated voltage P x R . The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. (3) Measuring conditions in accordance with EN 140401-801. Revision: 24-Jan-14 Document Number: 31006 1 For technical questions, contact: thinfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TNPW www.vishay.com Vishay TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE TCR TOLERANCE RESISTANCE E-SERIES 50 ppm/K 1% 10 to 100 k E24; E96 47 to 100 k E24; E192 0.5 % 25 ppm/K TNPW0402 0.1 % 15 ppm/K 0.1 % 10 ppm/K 0.1 % 50 ppm/K 1% 25 ppm/K TNPW0603 0.1 % 15 ppm/K 0.1 % 10 ppm/K 0.1 % 50 ppm/K 1% 10 to 1.0 M 0.1 % 0.1 % 10 ppm/K 0.1 % E24; E192 47 to 1.0 M 1% E24; E96 10 to 2.0 M 0.5 % 25 ppm/K 0.1 % 15 ppm/K 0.1 % 10 ppm/K 0.1 % 50 ppm/K E24; E192 47 to 2.0 M 1% 0.5 % 25 ppm/K TNPW1210 E24; E96 15 ppm/K 50 ppm/K TNPW1206 E24; E192 47 to 332 k 0.5 % 25 ppm/K TNPW0805 E24; E96 10 to 332 k 0.5 % 10 to 3.01 M E24; E96 47 to 2.13 M E24; E192 0.1 % 15 ppm/K 0.1 % 10 ppm/K 0.1 % PART NUMBER AND PRODUCT DESCRIPTION Part Number: TNPW12061K32DETA T N P W 1 2 0 6 1 K 3 2 D E T A TYPE/SIZE RESISTANCE TOLERANCE TCR PACKAGING SPECIAL TNPW0402 TNPW0603 TNPW0805 TNPW1206 TNPW1210 R = Decimal K = Thousand M = Million (4 digits) B = 0.1 % D = 0.5 % F = 1.0 % H = 50 ppm/K E = 25 ppm/K X = 15 ppm/K Y = 10 ppm/K TP TD CN TA TC Blank = Standard 0H = Single lot date code Product Description: TNPW-1206 1.32K 0.5 % T-9 RT1 TNPW-1206 1.32K 0.5 % T-9 RT1 TYPE/SIZE RESISTANCE TOLERANCE TCR PACKAGING SPECIAL TNPW-0402 TNPW-0603 TNPW-0805 TNPW-1206 TNPW-1210 Examples: 1K32 = 1320 99.68K = 99 680 360 = 360 0.1 % 0.5 % 1.0 % T-2 = 50 ppm/K T-9 = 25 ppm/K T-10 = 15 ppm/K T-13 = 10 ppm/K TP1 RT7 R52 RT1 RT6 Blank = Standard BV20545 = Single lot date code Notes * The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER. Revision: 24-Jan-14 Document Number: 31006 2 For technical questions, contact: thinfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TNPW www.vishay.com Vishay PACKAGING WIDTH PITCH REEL DIAMETER 1000 8 mm 2 180 mm/7" RT7 = TD 10 000 8 mm 2 180 mm/7" TNPW0603 TNPW0805 TNPW1206 TNPW1210 R52 = CN (1) 1000 8 mm 4 180 mm/7" TNPW0603 TNPW0805 TNPW1206 TNPW1210 RT1 = TA 5000 8 mm 4 180 mm/7" TYPE CODE QUANTITY TNPW0402 TP1 = TP (1) TNPW0402 PACKAGING STYLE Tape and reel cardboard tape acc. IEC 60286-3 Type I Note (1) 1000 pieces packaging quantity is only available for precision resistors with tolerance 0.1 %. DESCRIPTION RELATED PRODUCTS The production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body (Al2O3) and conditioned to achieve the desired temperature coefficient. A special laser is used to achieve the target value by smoothly cutting an appropriate groove in the resistive layer without damaging the ceramics. The resistor elements are covered by a protective coating designed for electrical, mechanical and climatic protection. The terminations receive a final tin-lead (SnPb) on nickel plating. The result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. Only accepted products are placed into the tape in accordance with IEC 60286-3, Type I. Resistance marking is not applied on TNPW0402. For ordering TNPW with lead free terminations please refer to latest edition of data sheet TNPW e3, (www.vishay.com/doc?28758). TNPS .... ESCC high-reliability thin film chip resistors are the premium choice for design and manufacture of equipment, where mature technology and proven reliability are of utmost importance. (www.vishay.com/doc?28789) ASSEMBLY The resistors are suitable for processing on automatic SMD assembly systems. They are suitable for automatic soldering using wave, reflow or vapour phase as shown in IEC 61760-1 (1). Solderability is specified for 2 years after production. The permitted storage time is 20 years. The terminations are plated with SnPb solder, controlled for a minimum lead Pb content of 6 % for compliance with the respective requirements of Bellcore, MIL and ESCC specifications. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. Revision: 24-Jan-14 Document Number: 31006 3 For technical questions, contact: thinfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TNPW Vishay Current Noise in V/V Non-Linearity A3 in dB www.vishay.com 120 TNPW1206 110 TNPW0805 TNPW0603 TNPW0402 100 90 3 2 1 TNPW0402 0.5 0.3 TNPW0805 TNPW1206 0.1 80 0.05 0.03 70 60 10 100 1K 10K 100K Resistance Value in Non-Linearity 0.01 100 1K 10K 100K 1M Resistance Value in Current Noise 60 60 [Z]-RO in % RO Phase Angle in TNPW0603 TNPW0603 40 20 10 0 TNPW0603 40 20 10 0 100 1 k 100 - 20 - 20 1 k - 40 - 40 4.75 k - 60 4.75 k - 80 1 5 10 50 100 10 k 500 1000 Frequency f in MHz 10 k - 80 1 5 10 50 100 500 1000 Frequency f in MHz HF Performance 60 60 TNPW0805 [Z]-RO in % RO Phase Angle in HF Performance - 60 40 20 10 0 100 TNPW0805 40 20 10 100 1 k 0 - 20 - 20 1 k - 40 - 40 - 60 - 80 - 60 10 k 1 HF Performance Revision: 24-Jan-14 5 10 50 100 500 1000 Frequency f in MHz 10 k - 80 1 5 10 50 100 500 1000 Frequency f in MHz HF Performance Document Number: 31006 4 For technical questions, contact: thinfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TNPW Vishay 120 Test Voltage in V Rated Power in % www.vishay.com 100 80 3K TNPW0805 1K TNPW0603 60 100 40 20 EN 0 - 55 - 25 0 25 50 70 Derating TNPW0805 1K TNPW0603 100R 1K 10K 100K Resistance in 100 TNPW0805 ^ 3K 10R Single-Pulse High Voltage Overload Test 1.2/50 s EN 140000 4.27 Pulse Load Pmax. Note * The solid line is based on IEC/EN reference test conditions which is considered as standard mode. However, above that the maximum permissible film temperature is 155 C (dashed line). Test Voltage in V 10 75 100 125 150 175 Ambient Temperature in C 10 TNPW0603 1 100 0.1 10 10R 100R 1K Single-Pulse High Voltage Overload Test 10/700 s EN 140000 4.27 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration t i Single Pulse Maximum pulse load, single pulse; applicable if P 0 and n 1000 and U Umax.; for permissible resistance change equivalent to 8000 h operation in standard operation mode Pulse Voltage Umax. 100 ^ Continuous Pulse Load Pmax. 0.01 10K 100K Resistance in TNPW0805 10 TNPW0603 1 500 TNPW0805 400 TNPW0603 300 200 0.1 100 0.01 10-5 Secondary conditions: a) P see diagram (Pulse Rating) b) u 70 C 10-4 10-3 10-2 10-1 1 10 0 10-5 Pulse Duration t i Maximum pulse load, continuous pulses; applicable if P P (amb) and U Umax.; for permissible resistance change equivalent to 8000 h operation in standard operation mode Continuous Pulse Revision: 24-Jan-14 10-4 10-3 10-2 10-1 1 10 Pulse Duration t i Maximum pulse voltage, single and continuous pulses; applicable if P P max.; for permissible resistance change equivalent to 8000 h operation in standard operation mode Pulse Voltage Document Number: 31006 5 For technical questions, contact: thinfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TNPW www.vishay.com Vishay TEST AND REQUIREMENTS All tests are carried out in accordance with the following specifications: IEC 60115-1, generic specification (includes tests) EN 140400, sectional specification (includes schedule for qualification approval) EN 140401-801, detail specification (includes schedule for conformance inspection) The testing also covers most of the requirements specified by EIA/ECA-703 and JIS-C-5201-1. The tests are carried out under standard atmospheric conditions in accordance with IEC 60068-1, 5.3. A climate category is applied, defined by the lower category temperature (LCT), the upper category temperature (UCT), and the number of days of the damp heat, steady-state test (56). Unless otherwise specified the following values apply: Temperature: 15 C to 35 C Relative humidity: 45 % to 75 % Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). The components are mounted for testing on boards in accordance with EN60115-1, 4.31 unless otherwise specified. The parameters stated in the Test Procedures and Requirements table are based on the required tests and permitted limits of EN140401-801. TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R) Stability for product type: TNPW0402 TNPW0603 TNPW0805 TNPW1206 TNPW1210 10 to < 100 100 to 3.01 M 10 to 3.01 M 4.5 - Resistance - 0.1 % 1 %; 0.5 % 4.8.4.2 - Temperature coefficient At (20/- 55/20) C and (20/125/20) C 25 ppm/K; 15 ppm/K; 10 ppm/K 50 ppm/K; 25 ppm/K Endurance U = P 70 x R or Umax.; 1.5 h on; 0.5 h off; 4.25.1 at 70 C 70 C; 1000 h (0.1 % R + 0.02 ) (0.05 % R + 0.01 ) (0.25 % R + 0.05 ) 125 C; 1000 h (0.1 % R + 0.02 ) (0.05 % R + 0.01 ) (0.5 % R + 0.05 ) 4.25.3 - Endurance at upper category temperature 4.13 - Short time overload U = 2.5 x P 70 x R 2 x Umax.; 2 s (0.05 % R + 0.01 ) (0.02 % R + 0.01 ) (0.1 % R + 0.02 ) 4.24 78 (Cab) Damp heat, steady state (40 2) C; (93 3) % RH; 56 days (0.1 % R + 0.02 ) (0.05 % R + 0.01 ) (0.5 % R + 0.05 ) 4.19 14 (Na) Rapid change of temperature 30 min at - 55 C: 30 min at 125 C; 5 cycles (0.05 % R + 0.01 ) (0.02 % R + 0.01 ) (0.1 % R + 0.02 ) 4.18.2 58 (Td) Resistance to soldering heat - Flammability, needle flame test 4.35 Revision: 24-Jan-14 Solder bath method; (260 5) C; (0.05 % R + 0.01 ) (0.02 % R + 0.01 ) (0.1 % R + 0.02 ) (10 1) s IEC 60695-11-5; 10 s No burning after 30 s Document Number: 31006 6 For technical questions, contact: thinfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TNPW www.vishay.com Vishay DIMENSIONS L Tt W H Tb DIMENSIONS AND MASS H (mm) L (mm) W (mm) Tt (mm) Tb (mm) MASS (mg) TNPW0402 0.35 0.05 1.0 0.05 0.5 0.05 0.2 0.10 0.2 0.10 0.65 TNPW0603 0.45 0.10 1.6 0.10 0.85 0.10 0.3 0.20 0.3 0.20 2 TNPW0805 0.45 0.10 2.0 0.15 1.25 0.15 0.4 0.20 0.4 0.20 5.5 TNPW1206 0.55 0.10 3.2 0.15 1.6 0.15 0.5 0.25 0.5 0.25 10 TNPW1210 0.60 0.15 3.2 0.15 2.45 0.15 0.5 0.25 0.5 0.25 16 TYPE SOLDER PAD DIMENSIONS G X Y SOLDER PAD DIMENSIONS REFLOW SOLDERING TYPE WAVE SOLDERING Y (mm) X (mm) G (mm) Y (mm) X (mm) G (mm) TNPW0402 0.4 0.6 0.5 - - - TNPW0603 0.5 0.9 1.0 0.9 0.9 1.0 TNPW0805 0.7 1.3 1.2 0.9 1.3 1.3 TNPW1206 0.9 1.7 2.0 1.1 1.7 2.3 TNPW1210 0.9 2.5 2.0 1.1 2.5 2.3 Revision: 24-Jan-14 Document Number: 31006 7 For technical questions, contact: thinfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: TNPW04021K10DETD TNPW06032401BT TNPW04021003BT TNPW04024752BT TNPW0603140KBETA TNPW08052492DT TNPW12061252BT TNPW060340R2DT TNPW08051402BT-T10 TNPW06037322DT TNPW12066343FT TNPW06031650BR52 TNPW06031912BR52 TNPW06031023BR52 TNPW060316R2BR52 TNPW060310K7BECN TNPW04023122BT TNPW04027682BT TNPW08051052BT TNPW08055491BT TNPW08057591BT TNPW12063092BT TNPW060326R1DT-T2 TNPW12062M00BECN TNPW08052672BT TNPW06031603BR52 TNPW12105421BT TNPW12063742BT TNPW12064422BT TNPW12066572BT TNPW06031152BT TNPW08058661BT TNPW04022871BT TNPW04021272BT TNPW06035761BT TNPW080528K7BHTA TNPW12062001BT-T10 TNPW06031801BT TNPW080543R2DHBD TNPW080549R9BHBD TNPW080549R9FHBD TNPW080551R1DHBD TNPW080583R5BHBD TNPW120615K0BYBD TNPW12061K00FKBD TNPW12061M00BXBD TNPW1206205RBYBD TNPW120620K0BYBD TNPW120624K9BYBD TNPW12062K49BXBD TNPW120639R2FHBD TNPW12063K74BYBD TNPW12064K87BXBD TNPW120651R1BHBD TNPW120655R5BHBD TNPW1206590RBHBD TNPW120659R0BHBD TNPW120660K4BYBD TNPW120660R4FHBD TNPW1206665RBYBD TNPW120668R1BHBD TNPW120680R6BHBD TNPW120688K7BXBD TNPW1206909KBXBD TNPW1210200RBHBD TNPW121047R5FHBD TNPW121090R9BHBD TNPW06033572BT TNPW08051373BT TNPW08052582BT TNPW0603562RBECN TNPW08055100BT TNPW040210R0DT TNPW040259R0DT TNPW06031133BT TNPW06031580BT TNPW06031820BT TNPW06032801BT TNPW06033570BT TNPW06036041BT TNPW06038450BT TNPW06039312BT TNPW06036341BT TNPW06038661BT TNPW12062611BT TNPW06031203BT TNPW06031143DT TNPW06032673DT TNPW06037962DT TNPW08051430BT TNPW12061001BT-T13 TNPW1206332RBYCN TNPW06033243BT TNPW06036191BT TNPW06038061BT TNPW08051383BT TNPW08053243BT TNPW06036812BT TNPW04021001BT TNPW04022001BT