047 RMS
www.vishay.com Vishay BCcomponents
Not Available for New Designs, Use 148 RUS
Revision: 16-Oct-13 1Document Number: 28314
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Capacitors
Radial Miniature Semi-Professional
Fig. 1
FEATURES
• Useful life: 1500 h at 105 °C
• Miniaturized, high CV-product per unit volume
• Charge and discharge proof
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Radial leads, cylindrical aluminum case with pressure
relief, insulated with a blue sleeve
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• EDB, telecommunication, industrial, automotive and
audio-video
• Smoothing, filtering, buffering in SMPS, timing
• Portable and mobile equipment (small size, low mass)
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance value (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code, in accordance with IEC 60062
• Code indicating factory of origin
• Name of manufacturer
• Upper category temperature (105 °C)
• Negative terminal identification
• Series number (047)
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case sizes (Ø DxL in mm) 10 x 12 to 18 x 35
Rated capacitance range, CR100 μF to 10 000 μF
Tolerance on CR± 20 %
Rated voltage range, UR16 V to 63 V
Category temperature range -40 °C to +105 °C
Endurance test at 105°C 1000h
Useful life at 105°C 1500h
Useful life at 40 °C, 1.3xIR applied 150 000h
Shelf life at 0V, 105°C 500h
Based on sectional specification IEC60384-4/EN130300
Climatic category IEC60068 40/105/56
036 RSP
047 RMS
105 °C
038 RSU 148 RUS150 RMI
136 RVI048 RML
miniaturized
longer
life
lower
CV-values
lower
Z
miniaturized85 °C
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V)
16 25 35 40 50 63
100-----10x12
220 - - 10x12 - 10x 16 10 x20
330 - - 10 x 16 10 x 20 - 12.5x20
470 10 x 12 10 x 16 10 x 20 - 12.5 x 20 12.5 x25
1000 10 x 20 12.5 x 20 12.5 x 25 - 16x25 16 x 31
2200 12.5 x 25 16 x 25 16 x 31 16 x 35 18x35 18x35
3300 16 x 25 16 x 31 18 x 35 18 x 35 18 x 35 -
4700 16 x 31 18 x 35 18 x 35 - - -
680016 x 3518 x 35----
10 00018 x 35-----
047 RMS
www.vishay.com Vishay BCcomponents
Not Available for New Designs, Use 148 RUS
Revision: 16-Oct-13 2Document Number: 28314
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in millimeters AND AVAILABLE FORMS
Fig. 2 - Form CA: Long leads Fig. 3 - Form CB: Cut leads
Fig. 4 - Form TFA: Taped in box (ammopack)
Table 1
Note
• For detailed tape dimensions please see www.vishay.com/doc?28360
Ø D
L
F
Ø d 5
min.
15
min.
Ø D
L
Ø d
F
4+ 1
0
DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
CASE
CODE Ø d Ø Dmax. Lmax. FMASS
(g)
PACKAGING QUANTITIES
FORM CA FORM CB FORM TFA
10 x 12 14 0.6 10.5 13.5 5.0 ± 0.5 1.6 1000 500 800
10 x 16 15 0.6 10.5 17.5 5.0 ± 0.5 1.9 500 500 800
10 x 20 16 0.6 10.5 22.0 5.0 ± 0.5 2.2 500 500 800
12.5 x 20 17 0.6 13.0 22.0 5.0 ± 0.5 4.0 500 500 500
12.5 x 25 18 0.6 13.0 27.0 5.0 ± 0.5 5.0 250 250 500
16 x 25 19 0.8 16.5 27.0 7.5 ± 0.5 8.0 250 250 250
16 x 31 20 0.8 16.5 33.5 7.5 ± 0.5 9.0 100 100 250
16 x 35 21 0.8 16.5 37.5 7.5 ± 0.5 11.5 100 100 -
18 x 35 22 0.8 18.5 37.5 7.5 ± 0.5 14.5 100 100 -
047 RMS
www.vishay.com Vishay BCcomponents
Not Available for New Designs, Use 148 RUS
Revision: 16-Oct-13 3Document Number: 28314
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
ORDERING EXAMPLE
Electrolytic capacitor 047 series
1000 μF/35 V; ± 20 %
Nominal case size: Ø 12.5 mm x 25 mm; form TFA
Ordering code: MAL2 047 30102 E3
Table 2
ELECTRICAL DATA
SYMBOL DESCRIPTION
CRRated capacitance at 100 Hz, tolerance ± 20 %
IRRated RMS ripple current at 100 Hz, 105 °C
IL1 Max. leakage current after 1 min at UR
tan Max. dissipation factor at 100 Hz
Z Max. impedance at 10 kHz or 100 kHz
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
IR
100 Hz
105 °C
(mA)
IL1
1 min
(μA)
tan
100 Hz
Z
100 kHz
()
ORDERING CODE MAL2047...
BULK PACKAGING TAPED
FORM CA FORM CB FORM TFA
16
470 10 x 12 330 78 0.16 0.33 55471E3 65471E3 35471E3
1000 10 x 20 540 160 0.16 0.17 55102E3 65102E3 35102E3
2200 12.5 x 25 830 360 0.20 0.10 55222E3 65222E3 35222E3
3300 16 x 25 1100 530 0.22 0.08 55332E3 65332E3 35332E3
4700 16 x 31 1300 760 0.24 0.07 55472E3 65472E3 35472E3
6800 16 x 35 1600 1100 0.28 0.06 55682E3 65682E3 -
10 000 18 x 35 1800 1600 0.36 0.05 55103E3 65103E3 -
25
470 10 x 16 360 120 0.14 0.25 56471E3 66471E3 36471E3
1000 12.5 x 20 630 250 0.14 0.13 56102E3 66102E3 36102E3
2200 16 x 25 990 550 0.18 0.08 56222E3 66222E3 36222E3
3300 16 x 31 1200 830 0.20 0.07 56332E3 66332E3 36332E3
4700 18 x 35 1500 1200 0.22 0.05 56472E3 66472E3 -
6800 18 x 35 1700 1700 0.26 0.04 56682E3 66682E3 -
35
220 10 x 12 270 80 0.12 0.38 50221E3 60221E3 30221E3
330 10 x 16 350 120 0.12 0.28 50331E3 60331E3 30331E3
470 10 x 20 450 170 0.12 0.22 50471E3 60471E3 30471E3
1000 12.5 x 25 780 350 0.12 0.12 50102E3 60102E3 30102E3
2200 16 x 31 1200 770 0.16 0.07 50222E3 60222E3 30222E3
3300 18 x 35 1500 1200 0.18 0.05 50332E3 60332E3 -
4700 18 x 35 1800 1600 0.20 0.04 50472E3 60472E3 -
40
330 10 x 20 380 140 0.12 0.26 57331E3 67331E3 37331E3
2200 16 x 35 1200 880 0.16 0.06 57222E3 67222E3 -
3300 18 x 35 1500 1300 0.18 0.04 57332E3 67332E3 -
50
220 10 x 16 310 110 0.10 0.33 51221E3 61221E3 31221E3
470 12.5 x 20 540 240 0.10 0.17 51471E3 61471E3 31471E3
1000 16 x 25 940 500 0.10 0.09 51102E3 61102E3 31102E3
2200 18 x 35 1400 1100 0.14 0.05 51222E3 61222E3 -
3300 18 x 35 1600 1700 0.16 0.04 51332E3 61332E3 -
63
100 10 x 12 210 66 0.09 0.65 58101E3 68101E3 38101E3
220 10 x 20 350 140 0.09 0.32 58221E3 68221E3 38221E3
330 12.5 x 20 470 210 0.09 0.22 58331E3 68331E3 38331E3
470 12.5 x 25 620 300 0.09 0.16 58471E3 68471E3 38471E3
1000 16 x 31 1100 630 0.09 0.08 58102E3 68102E3 38102E3
2200 18 x 35 1500 1400 0.13 0.04 58222E3 68222E3 -
047 RMS
www.vishay.com Vishay BCcomponents
Not Available for New Designs, Use 148 RUS
Revision: 16-Oct-13 4Document Number: 28314
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RIPPLE CURRENT AND USEFUL LIFE
Fig. 5 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 3
ADDITIONAL ELECTRICAL DATA
DESCRIPTION CONDITIONS VALUE
Voltage
Surge voltage Us 1.15UR
Reverse voltage Urev 1V
Current
Leakage current After 1min at URIL1 0.01 CR x UR+3μA
After 5min at URIL5 0.002 CR x UR+3μA
Inductance
Equivalent series inductance (ESL) Case Ø D=10mm Typ. 16nH
Case Ø D 12.5mm Typ. 18nH
Resistance
Equivalent series resistance (ESR) Calculated from tan max. and CR (see Table 2) ESR = tan /2fCR
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY
(Hz)
IR MULTIPLIER
UR = 16 V AND 25 V UR = 35 V AND 40 V UR = 50 V AND 63 V
50 0.95 0.85 0.80
100 1.00 1.00 1.00
300 1.07 1.20 1.25
1000 1.12 1.30 1.40
3000 1.15 1.35 1.50
10 000 1.20 1.40 1.60
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
3.1
40 50 60 70 80 90 100 110
Lifetime multiplier
(1)
200
100
60
1.0
30
150
20
6.0
4.0
2.0
1.5
12
8.0
3.0
Tamb (°C)
IA
IR
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz, 105 °C
(1) Useful life at 105 °C and IR applied: 1500 h
CCC206
047 RMS
www.vishay.com Vishay BCcomponents
Not Available for New Designs, Use 148 RUS
Revision: 16-Oct-13 5Document Number: 28314
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance
IEC 60384-4/
EN130300
subclause 4.13
Tamb = 105 °C; UR applied;
1000 h
C/C: ± 15 %
tan 1.3 x spec. limit
Z 2 x spec. limit
IL5 spec. limit
Useful life CECC 30301
subclause 1.8.1
Tamb = 105 °C; UR and IR applied;
1500 h
C/C: ± 45 %
tan 3 x spec. limit
Z 3 x spec. limit
IL5 spec. limit
no short or open circuit
total failure percentage: 1 %
Shelf life
(storage at high
temperature)
IEC 60384-4/
EN130300,
subclause 4.17
Tamb = 105 °C; no voltage applied;
500 h
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
C/C: ± 15 %
tan 1.3 x spec. limit
Z 2 x spec. limit
IL5 2 x spec. limit
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2019 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED