Key features include:
Verification of Ethernet on copper or
fiber up to 1 GB/s
TruePower™ over Ethernet (PoE)
testing up to 802.3at (25.5W)
Cable testing and fault identification
IPv4/IPv6 ready
Powers up in 3 seconds
Stores up to 50 reports
Datasheet: LinkRunner™ AT
Network Auto-Tester
Network technicians and desktop support professionals are under ever-increasing pressure to
deploy new infrastructure and ensure user satisfaction.
To address these challenges, LinkRunner AT Network Auto-Tester provides the fastest way to
solve network connectivity problems. Powering up in under three seconds, its one-button
AutoTest performs your required set of connectivity tests in seconds, enabling you to quickly and
accurately identify and solve network problems.
Overview
LinkRunner AT provides the answers you need to quickly troubleshoot connectivity problems:
Where does this cable or jack go?
How is this switch port provisioned?
Can I negotiate a Gigabit link?
Are there 802.1x security conflicts?
Are the DHCP and DNS servers working?
Can I get enough power from this port?
Can I connect to servers and the Internet with IPv4 and IPv6?
Can I connect over copper or fiber links?
Is this patch cable good?
1 of 8
In seconds, the LinkRunner AutoTest provides these answers and more on a brightly colored display that's easy to read under desks or outdoors.
You can document your test results with two quick keystrokes to prove the job's done right. With a six hour battery life and rugged design,
LinkRunner can work wherever and whenever you need it.
LinkRunner AT Features
Instant-on operation — ready to run your first test in less than three seconds.
Get answers fastuser-defined AutoTest performs your required set of connectivity tests in seconds, enabling you to accurately and quickly
identify and solve network problems.
Verify connection at 10/100/1G over copper or 100/1G over fiber — connect using copper or fiber, turn it on to see link status, connection
type, signal strength and traffic.
Nearest switch and VLAN information — uses IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco® and Extreme Discovery Protocols
(CDP and EDP) to display the VLAN and nearest switch model, slot and port.
TruePower™ PoE testing — quickly validate PoE performance by drawing actual power up to the 802.3at standard 25.5W. Load the circuit to
stress switches, cabling and patch panels, all while measuring the voltage and pairs being used. The ability to validate the TruePower delivery
before installing cameras, AP's and phones ensures smooth deployment.
802.1x authentication — verify access to secure networks using 802.1x and MAC Access Control Lists (ACL). The included LinkRunner
Manager software configures 802.1x EAP type, downloads certificates and enters passwords.
Cable verification and toningcheck patch cables using the built-in wiremap port including pin-to-pin connection, or installed wiring for length,
shorts, opens or split pairs. The optional office locator kit allows identification of up to six unique ports for documenting cable plants.
IPv4/IPv6 ready — supports both IPv4 and IPv6.
Key device and application availability — instead of a ping, which is often blocked or disabled, LinkRunner performs a TCP port open test to
verify application connectivity using IPv4 and IPv6. Router, DNS and DHCP servers are reported.
Document results — store up to 50 complete test results and download to your PC with the push of a button.
Designed for field usesix-hour Li-ion battery life, one-handed operation and a rugged design.
Easy upgrades — the mini-USB port allows software upgrades in the field in minutes.
2 of 8
LinkRunner AT Functions
Graphical Cable Wiremap and Cable Details
Finds opens, shorts, mis-wires and split pairs on non-terminated cable with a WireView Cable
Identifier and built-in wiremap port.
Cable Tests
Locate cable runs with toning, port advertisement, link blinking and wiremapping with up to six
cable identifiers. Toning supports both analog and digital IntelliTone™ modes.
A mis-wired cable with pairs 1,2 and 7,8 swapped
using cable identifier #4
Switch Information
LinkRunner AT displays critical nearest switch information including:
Switch name and model
IP address
Port, slot and VLAN
Duplex and speed (actual and advertised)
Signal strength
Connection MDI or MDI/X
PoE voltage and power (actual and test limits)
Graphical representation of power on pairs
100 Mbps link on copper with PoE on port 23
1 Gig link on fiber
3 of 8
TruePower™ PoE Loading
Verify you are receiving the required current and voltage up to 25.5W to power your PoE
enabled devices. The LinkRunner TruePower PoE loading draws actual power to verify that
your PoE enabled devices will have the required power to function.
AutoTest
Verify enterprise connectivity in seconds with AutoTest. Standardize your set of critical
network tests in profiles to run every time. Tests include:
PoE (copper only) class
Link speed and duplex(actual and advertised)
RX pair and polarity
802.1x authentication
Switch name, port, VLAN, model and IP
DHCP auto-negotiation with subnet and DHCP server addresses
IPv4 and IPv6 availability
Ping and TCP port connectivity with lost and min, max and average speed
Ping and TCP Port Connectivity
Verify connectivity to key devices with ping and TCP connectivity testing. Devices
automatically include a router, DNS server and DHCP server. Configure 10 additional devices
to meet your requirements by URL or IPv4/ IPv6 address and optional application port
number.
Reflector
The LinkRunner packet reflector mode allows it to be used as a remote device during
throughput tests to validate LAN and WAN throughput capabilities. LinkRunner AT supports
packet reflection for:
OptiView XG Network Analysis Tablet
OneTouch AT Network Assistant
EtherScope Network Assistant
MetroScope Service Provider Assistant
4 of 8
LinkRunner Manager Software
Included with LinkRunner, the LinkRunner Manager software gives you the ability to manage LinkRunner profiles and manage recorded sessions.
Profiles
The Profiles feature allows you to standardize your critical tests into one or more profiles making it easy for staff to produce consistent test results.
For example, use one profile to verify connectivity to key devices or applications and another to verify connectivity to other locations. You can also
name and transfer up to 10 profiles between LinkRunner and your PC.
The Profiles feature also allows you to configure, manage and control the use of your LinkRunner—or an entire fleet of them—with the following
settings:
Enable IPv6 addressing
IP configuration including DHCP or static addresses
VLAN and connection configuration including 802.1x security, speed/duplex settings and VLAN ID and priority
AutoTest configuration for 10 devices
PoE configuration and loading
Reflector mode configuration
Record Test Results
Document what LinkRunner is seeing to share or archive. Creating reports allows you to quickly close trouble tickets or provide documentation for
problem escalation. Press one key to record all the collected details for:
AutoTest results
Switch results
Cable results
Transfer sessions to a PC and easily view or store them using LinkRunner Manager.
5 of 8
Multiple language support
LinkRunner AT fully supports multiple languages including English, French, German, Spanish, Portuguese, Russian, Japanese and Simplified
Chinese. Multi-language support includes LinkRunner AT user interface, getting started guide, user manual and supporting LinkRunner Manager
software, help files and user reports.
Gold Support
Sign up for the Gold Support plan and enjoy unrivaled privileges that support and protect your investment. These include unlimited tech
assistance seven days a week, 24 hours a day via phone or our website support center; free software upgrades; unlimited web-based training;
discounted pricing on instructor-led and custom onsite training; access to our extensive Knowledgebase library that includes operation and
applicationrelated technical articles; and Gold "members only" special pricing and promotions. Some benefits are not available in all countries.
See www.flukenetworks.com/goldsupport for more information.
LinkRunner AT 1000 LinkRunner AT 2000
AutoTest
10/100/1G Copper
Color Display
Key Devices & TCP Connectivity
Verify 802.1x Settings
Identify Switch Ports and VLANs
PoE Voltages
IPv4 Support
Graphical, Color Wiremap and Cable Details
3-hour Battery Life (AA Battery Pack) Optional
6-hour Battery Life (Li-Ion Battery) Optional
WireView Cable Identifier #1 Optional
Reports 10 50
100/1G Fiber
IPv6 Support
TruePower PoE Loading
Reflector Option
6 of 8
Technical Specifications
Enviromental
Operating Temperature and Relative Humidity
32ºF to 113ºF (0ºC to +45ºC)
Note: The Li-ion battery will not charge if the internal temperature of the tester is above 113ºF
(45ºC)
Operating Relative Humidity (% RH without condensation) 90% (50ºF to 95ºF; 10ºC to 35ºC)
75% (95ºF to 113ºF; 35ºC to 45ºC)
Storage Temperature -4ºF to 140ºF (-20ºC to +60ºC)
Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop
Safety EN 61010-1 2nd edition
Safety(LR-AT 2000 only) EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only)
Altitude 4,000 m; Storage: 12,000 m
EMC FCC Part 15 Class A, EN 61326-1
Certifications and Compliance
Conforms to relevant European Union directives
Conforms to relevant Australian standards
Listed by the Canadian Standards Association
General
Media Access; Copper RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at)
Media Access; Fiber SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/SX/ZX (LRAT-2000 Only)
Cable Tests Pair lengths, opens, shorts, splits, crossed, straight through and cable ID
Tone Generator IntelliTone digital tone: [500 KHz]; analog tones: [400 Hz, 1 KHz]
Dimensions 3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)
Weight 18 oz (0.5 kg)
Li-ion Battery Removable, rechargeable li-ion battery pack (18.5 Watt-hrs). Typical operating life is 6 hours;
Typical charge time is 3 hours
AA Battery Removable AA battery pack. Typical operating life is 3 hours
External AC Adapter/Charger AC input 90 to 264 Vac 48 to 62 Hz input power DC output 15 Vdc at 2 amps (li-ion battery
pack only)
Display 2.8 in color LCD (320 x 240 pixels)
Keypad 12-key elastomeric
LEDs 2 LEDs (Link and Receive/Transmit indicators)
Host Interface USB 5-pin mini-B
7 of 8
LinkRunner Manager Software
Supported Operating System Windows® Vista, Windows® XP, Windows® 7
Processor 400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent
(recommended)
RAM 96 MB (minimum); 256 MB (recommended)
Hard Disk Up to 500 MB of available space may be required
Display 1024 x 768 high color, 32-bit (recommended)
Ordering Guide
Item Name Description
LRAT-2000 Includes LinkRunner AT 2000 with Li-ion battery, Wireview Cable ID #1, LinkRunner Manager software CD, USB cable,
RJ45 coupler, Getting Started Guide and soft case.
ACK-LRAT2000
Includes AirCheck™ tester, LinkRunner AT 2000 tester, AirCheck external directional antenna, spare Li-ion battery for
either AirCheck or LinkRunner, IntelliTone Pro 200 probe, WireView 2-6 cable ids, LinkRunner AT holster, AirCheck holster
and deluxe carrying case.
LRAT-2000-FTK Includes LinkRunner AT 2000, SimpliFiber® Pro optical power meter, 850/1300 multimode source, VisiFault™ VFL, FT120
FiberViewer™, FindFiber™ Remote ID source, carrying case and SC, ST, and LC power meter adapters.
LRAT-2000-KIT Includes LinkRunner AT 2000, IntelliTone™ Pro 200 Probe, WireView Cable IDs #1-6 and deluxe carrying case.
LRAT2-CIQ-GSV LinkRunner AT 2000/CableIQ Gigabit Service Kit Includes: LinkRunner AT 2000, CableIQ Qualification Tester, IntelliTone
Pro 200 Probe, CableIQ Remote Identifiers #1-7 and deluxe carrying case
LRAT-2000-5PK Includes 5 LRAT-2000s and 5 WireView 2-6 cable id sets.
Note: Available only in the US, Canada and Europe.
LRAT-2000-10PK Includes 11 LRAT-2000s and 11 WireView 2-6 cable id sets.
Note: Available only in the US, Canada and Europe.
CIQ-GSV2 Includes CableIQ™ Qualification Tester, LinkRunner AT 1000, IntelliTone Pro 200 Probe, CableIQ Remote Identifiers #1-7
and deluxe carrying case
LRAT-1000 Includes LinkRunner AT 1000 tester with AA battery pack, 4 AA batteries, LinkRunner Manager software CD, USB cable,
Getting Started Guide and soft case.
GLD-LRAT LinkRunner Gold Support Services, 1 yr.
For a complete listing of LinkRunner AT models and accessories, visit www.flukenetworks.com/LinkRunnerAT
Fluke Networks operates in more than 50 countries worldwide.
To find your local office contact details, go to www.flukenetworks.com/contact.
© 2014 Fluke Corporation. Rev: 05/07/2014 3:05 am (Literature Id: 4131738)
8 of 8