08-Serie 10600-A-R1_09-Serie 10600-A 11/01/13 10:19 Page54 10600 series Professional toggle switches - threaded bushing O 10 (.393) Distinctive features and pecifications CECC approved A ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : 3A 24VDC * Minimum load : 100A 10mV * Initial contact resistance : 10 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 1.000 Vrms 50 Hz min. between terminals of the same pole 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals of adjacent poles * Electrical life : 50.000 cycles HOMOLOGATION CECC 96201- 007 Availability : consult factory for details of approved models. Marking : to order switches marked CECC, add "CECC" to model number. MATERIALS * Case : diallylphthalate (DAP) or high temperature plastic material (UL94- V0) *Actuator : brass, nickel plated * Bushing : brass, nickel plated * Housing : stainless steel * Contacts : - silver - silver, gold plated * Terminal seal : epoxy GENERAL SPECIFICATIONS * Torque : 1,50 Nm (1.106 Ft.lb) max. applied to nut * Max. panel thickness : 4 mm (.157) * Operating temperature : - 40C to +85C ABOUT THIS SERIES Complete part numbers are shown on the following pages. Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. Sealing boots are available to protect the switches against dust and water. They are presented in section H. Mounting accessories : standard hardware supplied with all models : 1 knurled cap nut, 1 hex nut, 1 locking ring and 1 lockwasher. They are presented in section I. Packaging unit : 25 pieces. A-54 www.apem.com APEM 08-Serie 10600-A-R1_09-Serie 10600-A 11/01/13 10:19 Page55 10600 series 1.90 (.070) 3 II I 2- 1 ON OFF ON MOM OFF MOM ON OFF MOM 0.50 (.019) 2 1 3 1.80 (.070) O4.00 (.157 DIA) 0.80 (.031) 4.70 (.185) EPOXY 4.00 (.157) 3 6 I 1 4 II 12.00 (.472) 24 11.00 (.433) 8.50 (.334) O10.00 X 0.75 SI (.393 DIA X 0.75 IS) O14.00 (.551 DIA) 4.75 (.187) 5 3.70 (.145) 1 2 3 2 11.00 (.433) 0.50 (.019) Keyway EPOXY Keyway 3 2 1 Gold plated silver contacts 106391175 ON OFF ON 106371175 MOM OFF MOM 106381175 ON OFF MOM APEM O10.00 X 0.75 SI (.393 DIA X 0.75 IS) O14.00 (.551 DIA) 1.80 (.070) ON MOM 8.50 (.334) www.apem.com 4.00 (.157) 7.00 (.275) 11.00 (.433) I II24 III 3.70 (.145) 11.00 (.433) 8.50 (.334) O10.00 X 0.75 SI (.393 DIA X 0.75 IS) 0.50 (.019) - 11.00 (.433) 0.80 (.031) ON MOM 7.00 (.275) O14.00 (.551 DIA) 1.80 (.070) III 2- 3 - 24 II 1.10 (.043) 3.70 (.145) 1 2 3 ON ON I 2- 1 5- 4 2 O4.00 (.157 DIA) ON MOM I 11.00 (.433) 0.80 (.031) Silver contacts 106392103 106372103 106382103 - II 2- 3 5- 6 Gold plated silver contacts 106461175 ON 106421175 ON 3 positions - single pole ON MOM 1 O4.00 (.157 DIA) Silver contacts 106462103 106422103 - 3 4.00 (.157) 4.70 (.185) ON ON Gold plated silver contacts 106361175 ON 106321175 ON 2 positions - double pole I 1- 2 4.70 (.185) Silver contacts 106362103 106322103 II 1- 3 Keyway 13.20 (.519) 2 positions - single pole 13.20 (.519) 2 13.20 (.519) 1 3.70 (.145) * Solder lug terminals * 2 and 3 positions * 1 and 2 pole configurations * Available with matt black finish : consult factory for model number Keyway 1.90 (.074) Professional toggle switches - threaded bushing O 10 (.393) EPOXY A-55 A 08-Serie 10600-A-R1_09-Serie 10600-A 11/01/13 10:19 Page56 10600 series Professional toggle switches - threaded bushing O 10 (.393) 3 positions - double pole (5- 4) Gold plated silver contacts 106491175 ON OFF ON 106471175 MOM OFF MOM 106481175 ON OFF MOM 106440944* ON ON (2- 3) 4 12.00 (.472) 1 III 11.00 (.433) 8.50 (.334) O10.00 X 0.75 SI (.393 DIA X 0.75 IS) ON 0.50 (.019) I II24 O14.00 (.551 DIA) 4.75 (.187) (2- 3) ON 2 5 3.70 (.145) 1.80 (.070) ON 3 6 11.00 (.433) 4 5 6 ON 4.00 (.157) 0.80 (.031) ON OFF ON MOM OFF MOM ON OFF MOM Keyway O4.00 (.157 DIA) 106440886* I 2- 1 5- 4 4.70 (.185) Silver contacts 106492103 106472103 106482103 A II 13.20 (.519) III 2- 3 5- 6 EPOXY (5- 4) * Function 4 : SP in DP case. Jumper between terminals 2 and 4 to be wired by the user. O10.20 (.401 DIA) 6.20 (.244) PANEL CUT-OUT 2.20 (.086) A-56 www.apem.com APEM