Sil-Pad 1500ST (R) Electrically Insulating,Thermally Conductive, Soft Tack Elastomeric Material Features and Benefits TYPICAL PROPERTIES OF SIL-PAD 1500ST PROPERTY Color * Thermal impedance: 0.23C-in2/W (@50 psi) * Naturally tacky on both sides * Pad is repositionable * Excellent thermal performance * Auto-placement and dispensable IMPERIAL VALUE Blue METRIC VALUE Blue Reinforcement Carrier Fiberglass Fiberglass -- Thickness (inch) / (mm) 0.008 0.203 ASTM D374 Hardness (Shore 00) 75 75 ASTM D2240 Breaking Strength (lbs/inch) / (kN/m) 1.9 0.34 ASTM D1458 Elongation (% - 45 to Warp and Fill) 22 22 ASTM D412 Tensile Strength (psi) / (MPa) 238 1.6 ASTM D412 -76 to 356 -60 to 180 -- ASTM D149 Continuous Use Temp (F) / (C) ELECTRICAL Dielectric Breakdown Voltage (Vac) Bergquist Sil-Pad 1500ST (Soft Tack) is a fiberglass reinforced thermal interface material that is naturally tacky on both sides. Sil-Pad 1500ST exhibits superior thermal performance when compared to the competitors' thermal interface materials. Sil-Pad 1500ST is supplied in sheet or roll form for exceptional auto-dispensing and auto-placement in high volume assemblies. Sil-Pad 1500ST is intended for placement between an electronic power device and its heat sink. TEST METHOD Visual 3000 3000 Dielectric Constant (1000 Hz) 6.1 6.1 ASTM D150 Volume Resistivity (Ohm-meter) 1011 1011 ASTM D257 Flame Rating V-O V-O U.L. 94 THERMAL Thermal Conductivity (W/m-K) 1.8 1.8 ASTM D5470 THERMAL PERFORMANCE vs PRESSURE Pressure (psi) 10 25 50 100 200 TO-220 Thermal Performance (C/W) 1.54 1.52 1.51 1.49 1.46 Thermal Impedance (C-in2/W) (1) 0.37 0.28 0.23 0.21 0.20 1) The ASTM D5470 test fixture was used.The recorded value includes interfacial thermal resistance.These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. Typical Applications Include: * Power supplies * Automotive electronics * Motor controls Configurations Available: * Sheet form, die-cut parts and slit-to-width roll form Building a Part Number - 1012 - Standard Options NA Section E - 02 Section D 0.008 Section C - Section B Section A SP1500ST NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. _ _ _ = Standard configuration dash number, 1012 = 10" x 12" sheets, 10/250 = 10" x 250' rolls (8 mil only), or 00 = custom configuration 02 = Natural tack, both sides Standard thicknesses available: 0.008" SP1500ST = Sil-Pad 1500ST Material Note: To build a part number, visit our website at www.bergquistcompany.com. Sil-Pad (R): U.S. Patents 4,574,879; 4,602,125; 4,602,678; 4,685,987; 4,842,911 and others www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 The Bergquist Company European Headquarters Bramenberg 9a, 3755 BT Eemnes Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company - Asia Room 15, 8/F Wah Wai Industrial Centre No. 38-40, Au Pui Wan Street Fotan, Shatin, N.T. Hong Kong Ph: 852.2690.9296 Fax: 852.2690.2344 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_SP_1500ST_12.08 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: SP1500ST-0.008-02-1012 SP1500ST-0.008-00-1012 SP1500ST-0.012-00-1012 SP1500ST-0.012-02-1012