BYM07-xxx, EGL34x www.vishay.com Vishay General Semiconductor Surface Mount Glass Passivated Ultrafast Rectifier FEATURES * Superectifier structure for high reliability condition * Cavity-free glass-passivated junction Superectifier(R) * Ideal for automated placement * Ultrafast reverse recovery time * Low switching losses, high efficiency * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * AEC-Q101 qualified GL34 (DO-213AA) - Automotive ordering code: base P/NHE3 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. PRIMARY CHARACTERISTICS MECHANICAL DATA IF(AV) 0.5 A VRRM 50 V to 400 V IFSM 10 A trr 50 ns VF 1.25 V, 1.35 V Case: GL34 (DO-213AA), molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified ("X" denotes revision code e.g. A, B, ...) TJ max. 175 C Package GL34 (DO-213AA) Diode variation Single Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating MAXIMUM RATINGS RATINGS (TA = 25 C unless otherwise noted) PARAMETER Fast efficient device: SYMBOL BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 UNIT 1st band is green Polarity color bands (2nd band) EGL34A EGL34B EGL34C EGL34D EGL34F EGL34G Gray Red Pink Orange Brown Yellow 100 150 200 300 400 V Maximum repetitive peak reverse voltage VRRM 50 Maximum RMS voltage VRMS 35 70 105 140 210 280 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 V Maximum average forward rectified current at TT = 75 C IF(AV) 0.5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 10 A Maximum full load reverse current, full cycle average at TA = 55 C IR(AV) 50 A TJ, TSTG -65 to +175 C Operating junction and storage temperature range Revision: 25-Aug-17 Document Number: 88580 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM07-xxx, EGL34x www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 TEST SYMBOL UNIT CONDITIONS EGL34A EGL34B EGL34C EGL34D EGL34F EGL34G PARAMETER Maximum DC reverse current at rated DC blocking voltage TA = 25 C 5.0 IR (1) A TA = 125 C 50 Maximum instantaneous forward voltage 0.5 A Max. reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns Typical junction capacitance 4.0 V, 1 MHz CJ 7.0 pF VF (1) 1.25 1.35 V Note (1) Pulse test: 300 s pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Maximum thermal resistance BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 EGL34A EGL34B EGL34C EGL34D RJA (1) 150 RJT (2) 70 EGL34F EGL34G UNIT C/W Notes Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal (1) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.036 98 2500 7" diameter plastic tape and reel EGL34D-E3/83 0.036 83 9000 13" diameter plastic tape and reel EGL34DHE3_A/I (1) 0.036 I 9000 13" diameter plastic tape and reel EGL34D-E3/98 Note AEC-Q101 qualified (1) 12 0.5 Peak Forward Surge Current (A) Average Forward Rectified Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 0.4 0.3 0.2 Resistive or Inductive Load 0.1 0 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 10 8 6 4 2 0 0 25 50 75 100 125 150 175 1 10 100 Terminal Temperature (C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Revision: 25-Aug-17 Document Number: 88580 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM07-xxx, EGL34x www.vishay.com Vishay General Semiconductor 35 Pulse Width = 300 s 1 % Duty Cycle 10 TJ = 150 C 1 TJ = 25 C 0.1 20 15 10 0 0.4 0.6 0.8 1.2 1.0 1.4 1.6 1.8 0.1 2.0 1 100 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 100 Transient Thermal Impedance (C/W) 100 Instantaneous Reverse Leakage Current (A) 25 5 EGL34A thru EGL34D EGL34F and EGL34G 0.01 0.2 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 30 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 150 C 1 TJ = 125 C 0.1 TJ = 75 C 0.01 TJ = 25 C 0.001 0 20 40 60 1 0.1 0.01 100 80 10 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) GL34 (DO-213AA) Solderable Ends Mounting Pad Layout 1st BAND 2nd BAND 0.066 (1.676) 0.060 (1.524) 0.079 (2.0) MIN. D1 = D2 0.079 (2.0) MAX. 0.049 (1.25) MIN. 0.022 (0.559) 0.016 (0.406) D2 = D1 +0 - 0.008 (0.20) 0.177 (4.5) REF. 0.145 (3.683) 0.131 (3.327) 1st band denotes type and polarity 2nd band denotes voltage type Revision: 25-Aug-17 Document Number: 88580 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000