BYM07-xxx, EGL34x
www.vishay.com Vishay General Semiconductor
Revision: 25-Aug-17 1Document Number: 88580
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Glass Passivated Ultrafast Rectifier
FEATURES
• Superectifier structure for high reliability condition
• Cavity-free glass-passivated junction
• Ideal for automated placement
• Ultrafast reverse recovery time
• Low switching losses, high efficiency
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• AEC-Q101 qualified
- Automotive ordering code: base P/NHE3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency rectification and freewheeling
application in switching mode converters and inverters for
consumer, computer, automotive and telecommunication.
MECHANICAL DATA
Case: GL34 (DO-213AA), molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
(“X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: two bands indicate cathode end - 1st band
denotes device type and 2nd band denotes repetitive peak
reverse voltage rating
PRIMARY CHARACTERISTICS
IF(AV) 0.5 A
VRRM 50 V to 400 V
IFSM 10 A
trr 50 ns
VF1.25 V, 1.35 V
TJ max. 175 °C
Package GL34 (DO-213AA)
Diode variation Single
GL34 (DO-213AA)
Superectifier®
MAXIMUM RATINGS RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 UNIT
Fast efficient device: 1st band is green EGL34A EGL34B EGL34C EGL34D EGL34F EGL34G
Polarity color bands (2nd band) Gray Red Pink Orange Brown Yellow
Maximum repetitive peak reverse
voltage VRRM 50 100 150 200 300 400 V
Maximum RMS voltage VRMS 35 70 105 140 210 280 V
Maximum DC blocking voltage VDC 50 100 150 200 300 400 V
Maximum average forward rectified
current at TT = 75 °C IF(AV) 0.5 A
Peak forward surge current 8.3 ms single
half sine-wave superimposed
on rated load
IFSM 10 A
Maximum full load reverse current, full
cycle average at TA = 55 °C IR(AV) 50 μA
Operating junction and storage
temperature range TJ, TSTG -65 to +175 °C
BYM07-xxx, EGL34x
www.vishay.com Vishay General Semiconductor
Revision: 25-Aug-17 2Document Number: 88580
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
Notes
(1) Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
Note
(1) AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted)
Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST
CONDITIONS SYMBOL BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 UNIT
EGL34A EGL34B EGL34C EGL34D EGL34F EGL34G
Maximum DC reverse
current at rated DC
blocking voltage
TA = 25 °C
IR (1)
5.0
μA
TA = 125 °C 50
Maximum
instantaneous forward
voltage
0.5 A VF (1) 1.25 1.35 V
Max. reverse
recovery time
IF = 0.5 A,
IR = 1.0 A,
Irr = 0.25 A
trr 50 ns
Typical junction
capacitance 4.0 V, 1 MHz CJ7.0 pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 UNIT
EGL34A EGL34B EGL34C EGL34D EGL34F EGL34G
Maximum thermal resistance RJA (1) 150 °C/W
RJT (2) 70
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
EGL34D-E3/98 0.036 98 2500 7" diameter plastic tape and reel
EGL34D-E3/83 0.036 83 9000 13" diameter plastic tape and reel
EGL34DHE3_A/I (1) 0.036 I 9000 13" diameter plastic tape and reel
0
0 25 50 75 100 125 150 175
Average Forward Rectified Current (A)
Terminal Temperature (°C)
0.3
0.5
0.4
0.2
0.1
Resistive or Inductive Load
0
2
4
6
8
10
12
1 10010
Peak Forward Surge Current (A)
Number of Cycles at 60 Hz
T
J
= T
J
Max.
8.3 ms Single Half Sine-Wave
BYM07-xxx, EGL34x
www.vishay.com Vishay General Semiconductor
Revision: 25-Aug-17 3Document Number: 88580
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 4 - Typical Reverse Characteristics
Fig. 5 - Typical Junction Capacitance
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
100
10
1
0.1
0.01
T
J
= 150 °C
T
J
= 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
EGL34A thru EGL34D
EGL34F and EGL34G
Percent of Rated Peak Reverse Voltage (%)
020 40 60 80 100
0.001
0.01
0.1
1
10
100
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
TJ = 75 °C
Instantaneous Reverse Leakage
Current (µA)
Reverse Voltage (V)
Junction Capacitance (pF)
0.1 110
0
5
10
15
20
25
30
35
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0.01 0.1 101 100
100
10
1
0.1
t - Pulse Duration (s)
Transient Thermal Impedance (°C/W)
Solderable Ends
1
st
BAND
2
nd
BAND
1st band denotes type and polarity
2nd band denotes voltage type
D2
0.079 (2.0)
MAX.
0.049 (1.25)
MIN.
0.177 (4.5) REF.
Mounting Pad Layout
+ 0
- 0.008 (0.20)
D2 = D1
0.022 (0.559)
0.016 (0.406)
0.145 (3.683)
0.131 (3.327)
0.066 (1.676)
0.060 (1.524)
D1 =
0.079 (2.0)
MIN.
GL34 (DO-213AA)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
