LM140LQML www.ti.com SNVS381A - MARCH 2006 - REVISED MAY 2013 LM140LQML Series 3-Terminal Positive Regulators Check for Samples: LM140LQML FEATURES DESCRIPTION * * * The LM140L series of three terminal positive regulators is available with several fixed output voltages making them useful in a wide range of applications. The LM140LA is an improved version of the LM78LXX series with a tighter output voltage tolerance (specified over the full military temperature range), higher ripple rejection, better regulation and lower quiescent current. The LM140LA regulators have 2% VOUT specification, 0.04%/V line regulation, and 0.01%/mA load regulation. When used as a zener diode/resistor combination replacement, the LM140LA usually results in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. These regulators can provide local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow the LM140LA to be used in logic systems, instrumentation, Hi-Fi, and other solid state electronic equipment. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents. 1 2 * * * * Line Regulation of 0.04%/V Load Regulation of 0.01%/mA Output Voltage Tolerances of 2% at Tj = 25C and 4% over the Temperature Range Output Current of 100 mA Internal Thermal Overload Protection Output Transistor Safe Area Protection Internal Short Circuit Current Limit With adequate heat sinking the regulator can deliver 100 mA output current. Current limiting is included to limit the peak output current to a safe value. Safe area protection for the output transistor is provided to limit internal power dissipation. If internal power dissipation becomes too high for the heat sinking provided, the thermal shut-down circuit takes over, preventing the IC from overheating. Output Voltage Options Device ID Output Voltage LM140LA-5.0 5V LM140LA-12 12V LM140LA-15 15V 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2006-2013, Texas Instruments Incorporated LM140LQML SNVS381A - MARCH 2006 - REVISED MAY 2013 www.ti.com Connection Diagrams TO-39 Metal Can Package Figure 1. Bottom View See Package NDT0003A Equivalent Circuit These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 2 Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: LM140LQML LM140LQML www.ti.com SNVS381A - MARCH 2006 - REVISED MAY 2013 Absolute Maximum Ratings (1) Input Voltage 35V Internal Power Dissipation (2) Internally Limited -55C TA +125C Operating Temperature Range Maximum Junction Temperature +150C -65C TA +150C Storage Temperature Range Lead Temperature (Soldering, 10 sec.) Thermal Resistance +300C Still Air @ 0.5W JA 201C/W 500LF / Min Air Flow @ 0.5W 79C/W JC (@ 1.0W) 38C/W ESD Susceptibility (3) (1) (2) (3) TBD Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not specify specific performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), JA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax = (TJmax - TA)/JA or the number given in the Absolute Maximum Ratings, whichever is lower. Human body model, 100pF discharged through 1.5K Quality Conformance Inspection Mil-Std-883, Method 5005 - Group A Subgroup Description 1 Static tests at Temp C 25 2 Static tests at 125 3 Static tests at -55 4 Dynamic tests at 25 5 Dynamic tests at 125 6 Dynamic tests at -55 7 Functional tests at 25 8A Functional tests at 125 8B Functional tests at -55 9 Switching tests at 25 10 Switching tests at 125 11 Switching tests at -55 12 Settling time at 25 13 Settling time at 125 14 Settling time at -55 Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: LM140LQML 3 LM140LQML SNVS381A - MARCH 2006 - REVISED MAY 2013 www.ti.com LM140LA-5.0 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. DC: VI = 10V, IL = 40mA Symbol IQ Parameter Max Unit Subgroups 4.5 mA 1 4.2 mA 2 4.9 5.1 V 1 VI = 20V, IL = 5mA 4.8 5.2 V 1, 2, 3 VI = 20V, IL = 100mA 4.8 5.2 V 1, 2, 3 VI = 7.2V, IL = 5mA 4.8 5.2 V 1, 2, 3 VI = 7.2V, IL = 100mA 4.8 5.2 V 1, 2, 3 5mA IL 40 mA -20 20 mV 1 5mA IL 100mA -40 40 mV 1 IL = 100mA, 7.5V VI 25V -30 30 mV 1 Conditions Notes Min Quiescent Current VO Output Voltage RLoad Load Regulation RLine Line Regulation IQ Quiescent Current Change 7V VI 25V -30 30 mV 1 5mA IL 40mA -0.1 0.1 mA 1, 2, 3 7.5V VI 35V -0.5 0.5 mA 1 Min Max Unit Subgroups dB 4 Max Unit Subgroups 4.5 mA 1 4.2 mA 2 LM140LA-5.0 Electrical Characteristics AC Parameters Symbol RR Parameter Ripple Rejection Conditions Notes = 120Hz, eI = 1VRMS 55 LM140LA-12 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. DC: VI = 19V, IL = 40mA Symbol IQ Parameter Conditions Notes Min Quiescent Current VO Output Voltage RLoad Load Regulation RLine Line Regulation IQ Quiescent Current Change 11.75 12.25 V 1 VI = 27V, IL = 5mA 11.5 12.5 V 1, 2, 3 VI = 27V, IL = 100mA 11.5 12.5 V 1, 2, 3 VI = 14.5V, IL = 5mA 11.5 12.5 V 1, 2, 3 VI = 14.5V, IL = 100mA 11.5 12.5 V 1, 2, 3 5mA IL 40mA -40 40 mV 1 5mA IL 100mA -80 80 mV 1 IL = 100mA, 14.5V VI 30V -65 65 mV 1 14.2V VI 30V -65 65 mV 1 5mA IL 40mA -0.1 0.1 mA 1, 2, 3 14.3V VI 35V -0.5 0.5 mA 1 Max Unit Subgroups dB 4 LM140LA-12 Electrical Characteristics AC Parameters Symbol RR 4 Parameter Ripple Rejection Conditions = 120Hz, eI = 1VRMS Submit Documentation Feedback Notes Min 47 Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: LM140LQML LM140LQML www.ti.com SNVS381A - MARCH 2006 - REVISED MAY 2013 LM140LA-15 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. DC: VI = 23V, IL = 40mA Symbol IQ Parameter Max Unit Subgroups 4.5 mA 1 4.2 mA 2 14.7 15.3 V 1 VI = 30V, IL = 5mA 14.4 15.6 V 1, 2, 3 VI = 30V, IL = 100mA 14.4 15.6 V 1, 2, 3 VI = 17.6V, IL = 5mA 14.4 15.6 V 1, 2, 3 VI = 17.6V, IL = 100mA 14.4 15.6 V 1, 2, 3 5mA IL 40mA -50 50 mV 1 5mA IL 100mA -100 100 mV 1 IL = 100mA, 17.3V VI 30V -70 70 mV 1 Conditions Notes Min Quiescent Current VO Output Voltage RLoad RLine IQ Load Regulation Line Regulation Quiescent Current Change 17.3V VI 30V -70 70 mV 1 5mA IL 40mA -0.1 0.1 mA 1, 2, 3 17.5V VI 35V -0.5 0.5 mA 1 Min Max Unit Subgroups dB 4 LM140LA-15 Electrical Characteristics AC Parameters Symbol RR Parameter Ripple Rejection Conditions f = 120Hz, eI = 1VRMS Notes 47 Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: LM140LQML 5 LM140LQML SNVS381A - MARCH 2006 - REVISED MAY 2013 www.ti.com Typical Performance Characteristics 6 Maximum Average Power Dissipation Maximum Average Power Dissipation Figure 2. Figure 3. Peak Output Current Dropout Voltage Figure 4. Figure 5. Output Impedance Ripple Rejection Figure 6. Figure 7. Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: LM140LQML LM140LQML www.ti.com SNVS381A - MARCH 2006 - REVISED MAY 2013 Typical Performance Characteristics (continued) Quiescent Current Quiescent Current Figure 8. Figure 9. Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: LM140LQML 7 LM140LQML SNVS381A - MARCH 2006 - REVISED MAY 2013 www.ti.com TYPICAL APPLICATIONS NOTE It is recommended that a minimum load capacitor of 0.01 F be used to limit the high frequency noise bandwidth. *Required if the regulator is located far from the power supply filter. **Human body model, 100pF discharged through 1.5K Figure 10. Fixed Output Regulator VOUT = 5V + (5V/R1 + IO) R2 5V/R1 = 3 IO load regulation (L,) [(R1 + R2)/R1] (L, of LM140LA-5.0) Figure 11. Adjustable Output Regulator 8 Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: LM140LQML LM140LQML www.ti.com SNVS381A - MARCH 2006 - REVISED MAY 2013 Revision History Released Revision 03/10/06 A 05/02/13 A Section New release to corporate format Originator L. Lytle Changes 3 MDS data sheets converted into one Corp. data sheet format. Drift tables were removed from electrical characteristics since not performed on 883 product. MDS data sheets MNLM140LA-05-H Rev. 0B0, MNLM140LA-12H Rev. 0B0 and MNLM140LA-15-H Rev. 0B0. will be archived. Changed layout of National Data Sheet to TI format. Submit Documentation Feedback Copyright (c) 2006-2013, Texas Instruments Incorporated Product Folder Links: LM140LQML 9 PACKAGE OPTION ADDENDUM www.ti.com 2-May-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) (3) Top-Side Markings (4) LM140LAH-12/883 ACTIVE TO NDT 3 20 TBD Call TI Call TI -55 to 125 LM140LAH-12/883 Q ACO LM140LAH-12/883 Q >T LM140LAH-15/883 ACTIVE TO NDT 3 20 TBD Call TI Call TI -55 to 125 LM140LAH-15/883 Q ACO LM140LAH-15/883 Q >T LM140LAH5.0/883 ACTIVE TO NDT 3 20 TBD Call TI Call TI -55 to 125 LM140LAH5.0/883 Q ACO LM140LAH5.0/883 Q >T (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 2-May-2013 continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA NDT0003A H03A (Rev D) www.ti.com IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2013, Texas Instruments Incorporated