#635 [16.13] MAX REV, 6/3/05 DATE REV ECN APPD. BY 1/24/06 | B5 | 7448 M +-.850 [21.59] MAX+ 8 oS z \/ | 8 = O; # & = w 8 o| = r c r | | | | | NOTES: _ 1. CONNECTOR MATERIALS: L_ HOUSING: THERMOPLASTIC UL94 V-0 040 [1.02] CONTACTS/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA SEE CHART FOR PART NUMBER 3 4 .050 [1.27] TYP 2. FOR PRODUCT SPECIFICATIONS SEE PRO22-01. o TOL NONACCUM 3. TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. wD .025 [0.64] ad 4. THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE 2 ao USER THE ABILITY TO HAVE REASONABLE JACK/PANEL vl 4 100 [2.54] TYP <= 38 CLEARANCES, YET MAINTAIN GROUNDING CAPABILITY. | 6.035 [0.89] (8) TOL NON-ACCUM SS, THESE VARIABLES CAN BE ADJUSTED IN EITHER DIRECTION . . | 38 BUT MAY CARRY SOME CONSEQUENCES IN THE FORM OF 1 LOWER MATING FORCES OR TIGHTER ASSEMBLY TOLERANCES. 128 [3.25] 30 MICRO-INCHES [0.76um] SS6488SA-NF-1 6 (2) 125 [3.18] ae a CONTACT PLATING PART NUMBER 3, IN MATING AREA 9.062 [1.57] (2) #450 [11.43] g | mw | Bel Stewart Connector P.C.B. RECOMMENDED HOLE LAYOUT 11118 Susquehanna Trail South SEEN FROM COMPONENT SIDE Glen Rock, PA 17327-9199 TOLERANCE +.003 [0.08] UNLESS OTHERWISE SPECIFIED (717) 235-7512 Fax: (717) 235-7954 http: / /www.stewartconnector.com TITLE: Cee EIGHT CONTACT, EIGHT POSITION, SHIELDED JACK .OFiS | CHANGE WITHOUT NOTICE NON-FLANGED, ALTERNATE SOLDER TAIL DIMENSIONS: INCHES [METRIC] | THIS DRAWING AND THE SUEVECT MATTER SHOWN THEREON [PRN BY: 4, | DATE 4 /24/06 UNLESS OTHERWSE SPECIFIED ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF TOLERANCES ARE +.005 [0.13] | BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, | APPD BY: JM DATE 1-26-06 ANGLES ARE + 1 COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN SHEET NO. CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT [DWG NO. REV. 1 OF 1 MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. C1640094 BS 2 1 AutoCAD