1
www.power-one.com
Q Series 60...132 Watt DC-DC Converters
Input voltage ranges up to 168 V DC
1 or 2 isolated outputs 3.3...48 V DC
3 kV AC I/O electric strengh test voltage
Selection chart
Output 1 Output 2 Type Type Options
U
o nom
I
o nom
I
o max
U
o nom
I
o nom
I
o max Input Voltage Input Voltage
[V DC] [A] [A] [V DC] [A] [A] 16...36 V DC 38...75 V DC
5.1 16 16 - - - 24Q1001-2R 48Q1001-2R P
12 8 8 - - - 24Q2320-2R 48Q2320-2R P
15 6.6 6.6 - - - 24Q2540-2R 48Q2540-2R P
24 4 4 - - - 24Q2320-2R 48Q2320-2R P
24 4.4 4.4 - - - 24Q2660-2R 48Q2660-2R P
30 3.3 3.3 - - - 24Q2540-2R 48Q2540-2R P
48 2.2 2.2 - - - 24Q2660-2R 48Q2660-2R P
5.1 7.5 7.5 5.1 7.5 7.5 24Q2001-2R 48Q2001-2R P
12 4 4 12 4 4 24Q2320-2R 48Q2320-2R P
15 3.3 3.3 15 3.3 3.3 24Q2540-2R 48Q2540-2R P
24 2.2 2.2 24 2.2 2.2 24Q2660-2R 48Q2660-2R P
Output 1 Output 2 Type Type Type Options
U
o nom
I
o nom
I
o max
U
o nom
I
o nom
I
o max Input Voltage Input Voltage Input Voltage
[V DC] [A] [A] [V DC] [A] [A] 14.4...36 V DC 21.6...54 V DC 35...75 V DC
3.3 18 22 - - - BQ 1101-7 GQ 1101-7 CQ 1101-7 -9
5.1 16 20 - - - BQ 1001-7R GQ 1001-7R CQ 1001-7R -9, P
12 8 10 - - - BQ 2320-7R GQ 2320-7R CQ 2320-7R -9, P
15 6.6 8 - - - BQ 2540-7R GQ 2540-7R CQ 2540-7R -9, P
24 4.4 5.5 - - - BQ 2660-7R GQ 2660-7R CQ 2660-7R -9, P
24 4 5 - - - BQ 2320-7R GQ 2320-7R CQ 2320-7R -9, P
30 3.3 4 - - - BQ 2540-7R GQ 2540-7R CQ 2540-7R -9, P
48 2.2 2.75 - - - BQ 2660-7R GQ 2660-7R CQ 2660-7R -9, P
5.1 7.5 9.5 5.1 7.5 9.5 BQ 2001-7R GQ 2001-7R CQ 2001-7R -9, P
12 4 5 12 4 5 BQ 2320-7R GQ 2320-7R CQ 2320-7R -9, P
15 3.3 4 15 3.3 4 BQ 2540-7R GQ 2540-7R CQ 2540-7R -9, P
24 2.2 2.75 24 2.2 2.75 BQ 2660-7R GQ 2660-7R CQ 2660-7R -9, P
LGA
• Extremely slim case (4TE wide),
fully enclosed
• Extremely low inrush current, hot swappable
• Operating ambient temperaturerange
–40...71°C with convection cooling
2/12.2000
2
www.power-one.com
Output 1 Output 2 Type Type Options
U
o nom
I
o nom
I
o max
U
o nom
I
o nom
I
o max Input Voltage Input Voltage
[V DC] [A] [A] [V DC] [A] [A] 43...108 V DC 65...168 V DC
3.3 18 22 - - - DQ 1101-7 EQ 1101-7 -9
5.1 16 20 - - - DQ 1001-7R EQ 1001-7R -9, P
12 8 10 - - - DQ 2320-7R EQ 2320-7R -9, P
15 6.6 8 - - - DQ 2540-7R EQ 2540-7R -9, P
24 4 5.5 - - - DQ 2660-7R EQ 2660-7R -9, P
24 4 5 - - - DQ 2320-7R EQ 2320-7R -9, P
30 3.3 4 - - - DQ 2540-7R EQ 2540-7R -9, P
48 2.2 2.75 - - - DQ 2660-7R EQ 2660-7R -9, P
5.1 7.5 9.5 5.1 7.5 9.5 DQ 2001-7R EQ 2001-7R -9, P
12 4.4 5 12 4.4 5 DQ 2320-7R EQ 2320-7R -9, P
15 3.3 4 15 3.3 4 DQ 2540-7R EQ 2540-7R -9, P
24 2.2 2.75 24 2.2 2.75 DQ 2660-7R EQ 2660-7R -9, P
Cassette Style Q Series
Input
Input voltage refer to selection chart
Inrush current ETS 300 132-2 typ. 40 A
Output
Efficiency
U
i nom,
I
o nom up to 88%
Output voltage setting accuracy
U
i nom,
I
o nom ±0.6%
U
o nom
Worst case output voltage 1
U
i min...
U
i max, 0...
I
o1 max,
T
C min...
T
C max ±1.8%
U
o nom
Minimum output current 1, 2 in parallel configuration not required 0 A
Minimum output current 1, 2 in individual or series configuration 10%
I
o1,2 nom
Load regulation output 2
I
o1,2 min...
I
o1,2 max typ. 100 mΩ • (
I
o1 –
I
o2)
Output voltage switching noise IEC/EN 61204, total, peak-peak typ 0.3%
U
o nom
Common current limit.
I
o1 +
I
o2 rectangular U/I characteristic typ. 130% (
I
o1 max +
I
o2 max)
Operation of units in parallel by connecting the current sharing pins T
Protection
Input reverse polarity built-in fuse
Input undervoltage lockout typ. 90%
U
i min
Input overvoltage lockout typ. 110%
U
i max
Input transient protection varistor
Output no-load, overload and short-circuit proof
Output overvoltage second control loop typ. 125%
U
o nom
Overtemperature switch-off with auto restart (-7 units)
T
C typ. 100°C
Control
Output voltage adjustment with feature R 60/80...110%
U
o nom
Inhibit on input side TTL input, output(s) disabled if left open circuit
Status indication LEDs: In OK (-7 units), Out OK (all)
Output good signal (Out OK) isolated open collector signal
3
www.power-one.com
Safety
Approvals EN 60950, UL 1950, CSA C22.2 No. 950
Class of equipment class I
Protection degree IP 20/30
Electric strength test voltage I/case, O/case, Out OK/case 1.5 kV AC
I/O, Out OK/I, Out OK/O 3 kV AC
O/O 300 V DC
EMC
Electrostatic discharge IEC/EN 61000-4-2, level 4 (8/15 kV) criterion B
Electromagnetic field IEC/EN 61000-4-3, level 3 (10 V/m) criterion A
Electr. fast transients/bursts IEC/EN 61000-4-4, output/input, level 3/4 (2/4 kV) criterion B
Surge IEC/EN 61000-4-5, input, level 2/3 (1/2 kV) criterion B
Conducted disturbances IEC/EN 61000-4-6, level 2/3 (3/10 V) criterion A
Electromagnetic emissions CISPR 22/EN 55022, 24/48/BQ/CQ/GQ, conducted class B
Environmental –2 units
Operating ambient temperature
U
i nom,
I
o nom, convection cooled –10...50°C
Operating case temperature
T
C
U
i nom,
I
o nom –10...80°C
Storage temperature non operational –25...100°C
Damp heat IEC/EN 60068-2-3, 93%, 40°C 21 days
Vibration, sinusoidal IEC/EN 60068-2-6, 10...60/60...2000 Hz 0.15 mm/2 gn
Shock IEC/EN 60068-2-27, 6 ms 15 gn
Bump IEC/EN 60068-2-29, 6 ms 10 gn
MTBF MIL-HDBK-217F, GB, 40°C, 24/48Q1000 588'000 h
Environmental –7 units
Operating ambient temperature
U
i nom,
I
o nom, convection cooled –25...71°C
U
i nom,
I
o max, convection cooled –25...50°C
Operating case temperature
T
C
U
i nom,
I
o nom –25...95°C
U
i nom,
I
o max –25...85°C
Storage temperature non operational –40...100°C
Damp heat IEC/EN 60068-2-3, 93%, 40°C 56 days
Vibration, sinusoidal IEC/EN 60068-2-6, 10...60/60...2000 Hz 0.35 mm/5 gn
Shock IEC/EN 60068-2-27, 11 ms 50 gn
Bump IEC/EN 60068-2-29, 11 ms 25 gn
Random vibration IEC/EN 60068-2-64, 20...500 Hz 4.9 gn rms
MTBF MIL-HDBK-217F, notice 2, GB, 40°C, BQ 2000 853'000 h
Options
Extended temperature range –40...71°C, ambient, operating, for -7 units -9
Output voltage adjustment ±10%
U
o nom, excludes feature R and vice versa P
Accessories
Front panels for 19” rack mounting in 3U or 6U configuration (Schroff/Intermas)
Mating H15 connectors with screw, solder, fast-on or press-fit terminals
Connector retention facilities and code key system for connector coding
Additional external input or output filters
Mechanical mounting supports for chassis, DIN-rail and PCB mounting
Q Series 60...132 Watt DC-DC Converters
4
www.power-one.com
Mechanical data
Tolerances ±0.3 mm (0.012") unless otherwise indicated.
European
Projection
Cassette Style Q Series
104 (4.09")
60 (2.36")
111 (4.37")
20 (0.79")
105 (4.13")
127 (5.18")
164 (6.46")
8 (0.31")
19.8
(0.78")
Potentiometer (option P)
LED "OUT OK"
171.93 (DIN 41494) (6.76")
S09051
M3; 4 deep
Measuring point of
case temperature
TC
Pin allocation
Pin Electrical determination Q 1000 Q 2000
4 Output voltage (positive) Vo1+ Vo1+
6 Output voltage (positive) Vo1+ Vo2+
8 Output voltage (negative) Vo1–Vo1–
10 Output voltage (negative) Vo1–Vo2–
12 Sense line (positive) S+ S+
14 Sense line (negative) S–S–
16 Output voltage control input R R
18 Current sharing control input T T
20 Do not connect (internal Gnd.) - -
22 Output good signal (positive) Out OK+ Out OK +
24 Output good signal (negative) Out OK–Out OK –
26 Protective earth
28 Inhibit control input i i
30 Input voltage (positive) Vi+ Vi+
32 Input voltage (negative) Vi–Vi–
