IDCP-2218 Vishay Dale Inductors High Current, Surface Mount FEATURES * High energy storage. * Low resistance. * Tape and reel packaging for automatic handling. ELECTRICAL SPECIFICATIONS MATERIALS Inductance Range: 10H to 220H. Inductance Tolerance: 20%, 10%. Operating Temperature: - 25C to + 105C. Storage Temperature: - 25C to 85C. Resistance to Solder Heat: 260C for 10 seconds. Core: Ferrite. Wire: Enamelled copper wire. Terminal: Ag + Ni + Sn/Pb. DIMENSIONS in inches [millimeters] STANDARD ELECTRICAL SPECIFICATIONS INDUCTANCE (H) TEST FREQUENCY L DCR MAXIMUM (Ohms) RATED DC CURRENT* (A) 10.0 2.52MHz 0.10 1.44 12.0 2.52MHz 0.12 1.40 15.0 2.52MHz 0.14 1.30 18.0 2.52MHz 0.15 1.23 22.0 2.52MHz 0.18 1.11 27.0 2.52MHz 0.20 0.97 33.0 2.52MHz 0.23 0.88 39.0 2.52MHz 0.32 0.80 47.0 2.52MHz 0.37 0.72 56.0 2.52MHz 0.42 0.68 68.0 2.52MHz 0.46 0.61 82.0 2.52MHz 0.60 0.58 100.0 1KHz 0.70 0.52 120.0 1KHz 0.93 0.48 150.0 1KHz 1.10 0.40 180.0 1KHz 1.38 0.38 220.0 1KHz 1.57 0.35 B A C D F E *Rated Current: Value obtained when current flows and the temperature has risen 40C or when DC current flows and the initial value of inductance has fallen by 10%, whichever is smaller. ORDERING INFORMATION IDCP-2218 10H 20% MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE www.vishay.com 32 E A B C 0.229 0.01 [5.8 0.3] 0.177 0.01 [4.5 0.35] 0.205 0.01 [5.2 0.3] D E F 0.217 [5.5] 0.085 [2.15] 0.067 [1.7] Document Number 34096 Revision 07-Aug-02