PHOENIX CONTACT GmbH & Co. KG Page 1 / 5
http://www.phoenixcontact.com Jul 6, 2009
Extract from the online
catalog
SACC-DSI-MS-8CON-M12/0,5 SCO
Order No.: 1551914
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1551914
Sensor/actuator flush-type connector, 8-pos., M12 SPEEDCON, rear/
screw mounting with M12 thread, with 0.5 m TPE litz wire, 8 x 0.25
mm2
Commercial data
EAN 4046356161978
Pack 1 pcs.
Customs tariff 85444290
Weight/Piece 0.0227 KG
Catalog page information Page 27 (PC-2009)
Product notes
WEEE/RoHS-compliant since:
04/13/2007
http://
www.download.phoenixcontact.com
Please note that the data given
here has been taken from the
online catalog. For comprehensive
information and data, please refer
to the user documentation. The
General Terms and Conditions of
Use apply to Internet downloads.
Technical data
General data
Nominal current IN2 A
Nominal voltage UN30 V
Number of positions 8
Volume resistance ≤ 3 mΩ
SACC-DSI-MS-8CON-M12/0,5 SCO Order No.: 1551914
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1551914
PHOENIX CONTACT GmbH & Co. KG Page 2 / 5
http://www.phoenixcontact.com Jul 6, 2009
Insulation resistance ≥ 100 MΩ
Length of cable 0.5 m
Ambient temperature (operation) -25 °C ... 85 °C (plug/socket)
-25 °C ... 90 °C (cable, fixed installation)
General characteristics
Coding A - standard
Inflammability class acc. to UL 94 V0
Surge voltage category II
Pollution degree 3
Degree of protection IP67
Contact material CuZn
Contact surface material Au
Contact carrier material PA 66
Material, knurls Zinc die-cast, (nickel-plated)
Sealing material NBR
Mounting type Rear mounting, M12 x 1 screw thread with counter nut
Status display No
Conductor data
Cable type TPE litz wire
Conductor cross section 0.25 mm²
AWG signal line 24
Conductor structure, signal line 14x 0.15 mm
Core diameter including insulation 1.15 mm ±0.07 mm
Thickness, insulation 0.21 mm
Wire colors Brown, blue, white, gray, pink, green, yellow, red
Insulation resistance ≥ 20 MΩ*km
Conductor resistance ≤ 80 mΩ/m
Nominal voltage, conductor 300 V
Test voltage, conductor 2000 V AC
Material conductor insulation TPE
Conductor material Tin-plated Cu litz wires
SACC-DSI-MS-8CON-M12/0,5 SCO Order No.: 1551914
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1551914
PHOENIX CONTACT GmbH & Co. KG Page 3 / 5
http://www.phoenixcontact.com Jul 6, 2009
Drawings
Dimensioned drawing
M12 flush-type connector
Housing cutout for M12 fastening thread,
mounting panel with thread
Housing cutout for M12 fastening thread, mounting panel with
feed-through hole (alternative with surface as protection against
rotation)
SACC-DSI-MS-8CON-M12/0,5 SCO Order No.: 1551914
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1551914
PHOENIX CONTACT GmbH & Co. KG Page 4 / 5
http://www.phoenixcontact.com Jul 6, 2009
Circuit diagram
Contact assignment of the M12 plug and the M12 socket
Schematic diagram
Pin assignment M12 plug, 8-pos., view plug side
SACC-DSI-MS-8CON-M12/0,5 SCO Order No.: 1551914
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1551914
PHOENIX CONTACT GmbH & Co. KG Page 5 / 5
http://www.phoenixcontact.com Jul 6, 2009
Address
PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg,Germany
Phone +49 5235 3 00
Fax +49 5235 3 41200
http://www.phoenixcontact.com
© 2009 Phoenix Contact
Technical modifications reserved;