Luckylight 3.0mm (1.2") 8x8 White Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-30881XWB-Y Spec No: W12088A/B Approved: JoJo Rev No: V.2 Checked: Sun Lucky Light Electronics Co., Ltd. Date: Mar/25/2008 Drawn: Liu Page: 1 OF 6 http://www.luckylightled.com Luckylight Features: 1.2inch (32.00mm) Matrix height. Colors: white. Flat package and light weight. Easy assembly. High quality and low cost. High reliable and intensity. Low power requirement. The product itself will remain within RoHS compliant version. Descriptions: The KWM-30881 series is a large emitting area (3.0mm diameter) LED sources configured in a 64 dots 8*8 matrix array. These devices are made with yellow dots and black surface. Applications: Audio equipment. Instrument panels. Digital read out display. Device Selection Guide: Model No. Chip Material Face Color KWM-30881AWB-Y Descriptions Black Row Anode Black Row Cathode InGaN KWM-30881CWB-Y Spec No: W12088A/B Approved: JoJo Rev No: V.2 Checked: Sun Lucky Light Electronics Co., Ltd. Date: Mar/25/2008 Drawn: Liu Page: 2 OF 6 http://www.luckylightled.com + Luckylight Package Dimension: 8 [0.315] PIN 16 PIN 9 + 24 [0.946] 32 [1.261] 4*7=28 [1.10''] + + PIN 1 PIN 8 4*7=28 [1.103] 5.3 [0.209]0.5 3 [ 0.118] 32 [1.261] COL. 1 2 3 4 5 6 7 8 ROW. 1 2 3 MODEL NO. 4 0.5 [0.020] 5 6 7 2.54*7=17.78 [0.701] 8 KWM-30881AWB-Y ROW KWM-30881CWB-Y COL. 1 2 3 4 5 6 7 8 PIN 13 NO. 3 4 10 6 11 15 16 PIN NO. ROW COL. 1 2 3 4 5 6 7 8 PIN 13 NO. 3 4 10 6 11 15 16 PIN NO. 1 9 2 14 3 8 4 12 1 5 1 6 7 6 7 7 2 7 2 8 5 8 5 1 9 2 14 3 8 4 12 5 NOTES: All dimensions are in millimeters (inches) tolerance are 0.25mm (0.01inch) unless otherwise noted. Spec No: W12088A/B Approved: JoJo Rev No: V.2 Checked: Sun Lucky Light Electronics Co., Ltd. Date: Mar/25/2008 Drawn: Liu Page: 3 OF 6 http://www.luckylightled.com Luckylight Absolute Maximum Ratings at Ta=25 Parameters Symbol Max. Unit Power Dissipation Per Dot PD 100 mW Peak Forward Current Per Dot (1/10 Duty Cycle, 0.1ms Pulse Width) IFP 100 mA Forward Current Per Dot IF 25 mA 0.4 mA/ 5 V Dating Linear From 50 Reverse Voltage VR Operating Temperature Range Topr -40 to +80 Storage Temperature Range Tstg -40 to +85 Soldering Temperature Tsld 260 for 5 Seconds Electrical Optical Characteristics at Ta=25 Parameters Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity (Note 1) * IV 45.0 90.0 --- mcd IF=20mA Luminous Intensity Matching Ratio (Dot To Dot) Iv-m --- --- 2:1 X --- 0.28 --- Chromaticity Coordinates (Note 2) IF=10mA IF=20mA Y --- 0.29 --- Forward Voltage VF --- 3.2 4.0 V IF=20mA Reverse Current IR --- --- 50 A VR=5V Notes: 1. Luminous Intensity Measurement allowance is 10%. 2. It use many parameters that correspond to the CIE 1931 2. X, Y, and Z are CIE 1931 2 values of Red, Green and Blue content of the measurement. Spec No: W12088A/B Approved: JoJo Rev No: V.2 Checked: Sun Lucky Light Electronics Co., Ltd. Date: Mar/25/2008 Drawn: Liu Page: 4 OF 6 http://www.luckylightled.com Luckylight Typical Electrical / Optical Characteristics Curves (25 Ambient Temperature Unless Otherwise Noted) Ta=25 Forward Current IF (mA) 100 Forward Current & Forward Voltage 75 50 25 0 300 1000 400 500 600 700 Wavelength p (nm) Luminous Intensity & Ambient Temperature 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta () Ta=25 50 40 30 20 10 0 2.5 2.7 2.9 3.1 3.3 3.5 3.7 Forward Voltage VF (V) 800 Luminous Intensity & Forward Current Relative Luminous Intensity (%) Relative Luminous Intensity (%) Relative Luminous Intensity (%) Spectrum Distribution Ta=25 1000 f=1KHz Duty=1/10 100 10 1 0 10 1 2 3 10 10 10 Forward Current IF (mA) Forward Current IF (mA) Forward Current Derating Curve 50 40 30 25 20 10 0 Spec No: W12088A/B Approved: JoJo 0 20 40 60 80 100 Ambient Temperature Ta () Rev No: V.2 Checked: Sun Lucky Light Electronics Co., Ltd. Date: Mar/25/2008 Drawn: Liu Page: 5 OF 6 http://www.luckylightled.com Luckylight Please read the following notes before using the datasheets: 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 If the package contains a moisture proof bag inside, please don't open the package before using. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 80%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 60%RH or less. 3. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 260 for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 4. Soldering When soldering, for Lamp without stopper type and must be leave a minimum of 3mm clearance from the base of the lens to the soldering point. To avoided the Epoxy climb up on lead frame and was impact to non-soldering problem, dipping the lens into the solder must be avoided. Do not apply any external stress to the lead frame during soldering while the LED is at high temperature. Recommended soldering conditions: Soldering Iron Temperature Soldering Time 300 Max. 3 sec. Max. (one time only) Wave Soldering Pre-heat Pre-heat Time Solder Wave Soldering Time 100 Max. 60 sec. Max. 260 Max. 5 sec. Max. Note: Excessive soldering temperature and / or time might result in deformation of the LED lens or catastrophic failure of the LED. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used . It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 6. Caution in ESD Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded. Spec No: W12088A/B Approved: JoJo Rev No: V.2 Checked: Sun Lucky Light Electronics Co., Ltd. Date: Mar/25/2008 Drawn: Liu Page: 6 OF 6 http://www.luckylightled.com