© 2011, SCILLC. All rights reserved.
Jan-2011, Rev. 0 www.onsemi.com Publication Order Number:
1SV316/D
Features
• Ultrasmall-sized package facilitates high-density mounting and permits 1SV316-applied equipment to be made
smaller
• Small interterminal capacitance (C=0.23pF typ)
Specifi cations
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Reverse Voltage VR50 V
Forward Current IF50 mA
Allowable Power Dissipation P 150 mW
Junction Temperature Tj 125 °C
Storage Temperature Tstg --55 to +125 °C
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions Ratings Unit
min typ max
Reverse Voltage VRIR=10μA50V
Reverse Current IRVR=50V 0.1 μA
Forward Voltage VFIF=50mA 0.95 1.0 V
Interterminal Capacitance C VR=50V, f=1MHz 0.23 pF
Series Resistance rs IF=10μA, f=100MHz 2400 Ω
IF=10mA, f=100MHz 4 6 9 Ω
Note ) The specifi cations shown above are for each individual diode
Marking : UV
Package Dimensions
unit : mm (typ)
1251A
Ordering number : ENN6262
1SV316 Silicon Epitaxial Pin Diode
Variabe Resistance Attenuator Use
ON Semiconductor
DATA SHEET
Electrical Connection
1 : Anode
2 : Cathode
3 : Cathode / Anode
SANYO : CP
0.4
0.95 0.95
1.9
2.9
0.
5
1.5
2.5
0.5
0.16
0 to 0.1
0.8
1.1
2
3
1
1
Anode 2
Cathode
Cathode / Anode
3
1SV316
Rev. 0 | Page 2 of 3 | www.onsemi.com
IR -- VR
rs -- IF
Reverse Current, IR -- nASeries Resistance, rs -- Ω
rs -- f
Series Resistance, rs -- Ω
Reverse Voltage, VR -- V
Forward Current, IF -- mA Frequency, f -- MHz
IT00995
IT01010 IT00996
Ta=75°C
25°C
50°C
0102030405060
0.01
2
3
5
7
0.1
3
2
5
1.0
7
2
3
5
7
10
2
5
3
0.01 0.1 1.0 10
10000
1000
100
10
1.02
2
3
5
5
7
7
2
3
5
7
2
3
5
7
2
3
5
7
325732573257325732
2
10 100 10001.0 5
5
7
7
10
1.0 3
3
2
5
7
100
3
2
5
7
1000
3
2
5
7
10000
3
IF=10μA
1mA
5mA
10mA
100μA
IF -- VF
Forward Current, IF -- mA
Forward Voltage, VF -- V
C -- VR
Interterminal Capacitance, C -- pF
Reverse Voltage, VR -- V
0 0.2 0.4 0.6 0.8 1.0 1.2
0.01
0.1
1.0
10
2
3
5
7
2
3
5
7
2
3
5
7
2
3
5
7
100
IT00993 IT00994
25732
2
5
5
7
7
3
3
2573
1.0
0.1 0.1 1.0 10 100
Ta=125
°
C
25°C
--55°C
f=1MHz
Ta=25°C
1SV316
1SV316/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada.
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
PUBLICATION ORDERING INFORMATION
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of
the application or use of any product or circuit, and specifi cally disclaims any and all liability, including without limitation special, consequential or incidental damages. SCILLC strives to supply
high-quality high-reliability products and recommends adopting safety measures when designing equipment to avoid accidents or malfunctions. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design. “Typical” parameters which may be provided in SCILLC data sheets and/or specifi cations
can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals,” must be validated for each customer application by customer’s
technical experts. SCILLC shall not be held liable for any claim or suits with regard to a third party’s intellectual property rights which has resulted from the use of the technical information and
products mentioned above. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components
in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create
a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC
and its offi cers, employees, subsidiaries, affi liates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affi rmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
