56
Latch Header (1.27mm, Straight, Solder Dip)
NFP SERIES
ORDERING INFORMATION
CONNECTOR DIMENSIONS (reference only)
NFP- *** A-01 *4- * -**
Header Series
No. of Positions
Terminal Type:
4: Straight Solder Dip
Blank: 2.7 mm Terminal
1: 4.6 mm Terminal
Plating (see below)
1: Short Latch
2: Long Latch
Standard Header
Characteristics
Current Rating: 0.5A
Insulation Resistance: 1,000M½Minimum at 500 VDC
Withstanding Voltage: 500 VAC for 1 minute
Contact Resistance: 15m½Max. at 10mA
Operating Temperature: -20˚C ~ +85˚C
Material and Finish
Insulator: High Temp Thermoplastic-UL94V-0
Contact: Copper Alloy
Plating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Features
1. Straight terminals
2. Short or long latches
3. Long terminal available
4. Variety of plating options
5. Spring pin for secure mount
6. Latches eject receptacle
7. Central polarizing key
❑Short Latch
Positions 26, 34, 40, 50, 80,100 available in long terminals
† Long latch
Positions 60, 80,100 available in long terminals
TYPES OF PLATING