53
NF Connectors
53
NF Connectors
pages
Latch Header (1.27mm) Right Angle, Solder Dip 54-55
Latch Header (1.27mm) Straight, Solder Dip 56-57
Latch Header (1.27mm) Straight, Solder Dip 58-59
Box Header (1.27mm) Right Angle, Solder Dip 60-61
Box Header (1.27mm) Straight, Solder Dip 62-63
IDC Connectors (1.27mm) Transition Header 64-65
IDC Connectors (1.27mm) IDC Receptacle 66-67
Board to Board Recep. (1.27mm) Through Hole 68-69
Latch Header (1.27mm, Right Angle, Solder Dip)
NFP SERIES
ORDERING INFORMATION
TYPES OF PLATING
CONNECTOR DIMENSIONS (reference only)
NFP- *** A-01 *2- * -**
Header Series
No. of Positions
Terminal Type:
2: Right Angle Solder Dip
Blank: 2.7 mm Terminal
1: 4.6 mm Terminal
Plating (see below)
1: Short Latch
2: Long Latch
Standard Header
Characteristics
Current Rating: 0.5A
Insulation Resistance: 1,000M½Minimum at 500 VDC
Withstanding Voltage: 500 VAC for 1 minute
Contact Resistance: 15m½Max. at 10mA
Operating Temperature: -20˚C ~ +85˚C
Material and Finish
Insulator: High Temp Thermoplastic-UL94V-0
Contact: Copper Alloy
Plating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Features
1. Right-angle terminals
2. Short or long latches
3. Long terminal available
4. Variety of plating options
5. Latches eject receptacle
6. Central polarizing key
54
❑Short Latch
Positions 50, 60, 64, 80,100 available in long terminals
† Long Latch
Positions 40, 64, 80, 100 available in long terminals
Connector Outline Dimensions
PCB Layout
NF Connectors
NFP SERIES
APPLICABLE DIMENSIONS (reference only)
Latch Header (1.27mm, Right Angle, Solder Dip)
55
X= 6.5 (Short latch type)
4.0 (Long latch type)
Y= 2.7 (Short terminal length)
4.6 (Long terminal length)
Contact Detail
10, 26, 34, 50 Contacts 16, 20, 40, 60, 64, 80, 100 Contacts
Note: Left half of this PCB layout is identical to Section A
Section A Section B
56
Latch Header (1.27mm, Straight, Solder Dip)
NFP SERIES
ORDERING INFORMATION
CONNECTOR DIMENSIONS (reference only)
NFP- *** A-01 *4- * -**
Header Series
No. of Positions
Terminal Type:
4: Straight Solder Dip
Blank: 2.7 mm Terminal
1: 4.6 mm Terminal
Plating (see below)
1: Short Latch
2: Long Latch
Standard Header
Characteristics
Current Rating: 0.5A
Insulation Resistance: 1,000M½Minimum at 500 VDC
Withstanding Voltage: 500 VAC for 1 minute
Contact Resistance: 15m½Max. at 10mA
Operating Temperature: -20˚C ~ +85˚C
Material and Finish
Insulator: High Temp Thermoplastic-UL94V-0
Contact: Copper Alloy
Plating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Features
1. Straight terminals
2. Short or long latches
3. Long terminal available
4. Variety of plating options
5. Spring pin for secure mount
6. Latches eject receptacle
7. Central polarizing key
❑Short Latch
Positions 26, 34, 40, 50, 80,100 available in long terminals
† Long latch
Positions 60, 80,100 available in long terminals
TYPES OF PLATING
57
Connector Outline Dimensions
NF Connectors
NFP SERIES
APPLICABLE DIMENSIONS (reference only)
PCB Layout
Latch Header (1.27mm, Straight, Solder Dip)
X= 6.5 (Short latch type)
4.0 (Long latch type)
Y= 2.7 (Short terminal length)
4.6 (Long terminal length)
Contact Detail
10, 26, 34, 50 Contacts 16, 20, 40, 60, 64, 80, 100 Contacts
Note: Left half of this PCB layout is identical to Section A
Section A Section B
58
Latch Header (1.27mm, Straight Solder Dip)
NFP SERIES
ORDERING INFORMATION
TYPES OF PLATING
CONNECTOR DIMENSIONS (reference only)
NFP- *** A-03 *4- * -**
Header Series
No. of Positions
Terminal Type:
4: Straight Solder Dip
Blank: 2.7 mm Terminal
1: 4.6 mm Terminal
Plating (see below)
1: Short Latch
2: Long Latch
Without Spring Pin Mount
Characteristics
Current Rating: 0.5A
Insulation Resistance: 1,000M½Minimum at 500 VDC
Withstanding Voltage: 500 VAC for 1 minute
Contact Resistance: 15m½Max. at 10mA
Operating Temperature: -20˚C ~ +85˚C
Material and Finish
Insulator: High Temp Thermoplastic-UL94V-0
Contact: Copper Alloy
Plating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Features
1. Straight terminals
2. Short or long latches
3. Variety of plating options
4. Long terminal available
5. Latches eject receptacle
6. Central polarizing key
❑Short Latch
Positions 10, 50, 60, 80,100 available in long terminals
† Long Latch
Positions 60, 80, 100 available in long terminals
59
Connector Outline Dimensions
PCB Layout
NF Connectors
NFP SERIES
APPLICABLE DIMENSIONS (reference only)
Latch Header (1.27mm, Straight Dip)
Contact Detail
X= 6.5 (Short latch type)
4.0 (Long latch type)
Y= 2.7 (Short terminal length)
4.6 (Long terminal length)
10, 26, 34, 50 Contacts 16, 20, 40, 60, 64, 80, 100 Contacts
60
Box Header (1.27mm, Right Angle, Solder Dip)
NFP SERIES
ORDERING INFORMATION
TYPES OF PLATING
CONNECTOR DIMENSIONS (reference only)
NFP- ** A-013 2- **
Header Series
No. of Positions
Plating (see below)
Terminal Type:
2: Right Angle Solder Dip
Box Header
Characteristics
Current Rating: 0.5A
Insulation Resistance: 1,000M½Minimum at 500 VDC
Withstanding Voltage: 500 VAC for 1 minute
Contact Resistance: 15m½Max. at 10mA
Operating Temperature: -20˚C ~ +85˚C
Material and Finish
Insulator: High Temp Thermoplastic-UL94V-0
Contact: Copper Alloy
Plating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Features
1. Right-angle terminals
2. Variety of plating options
3. Central polarizing key
Connector Outline Dimensions
PCB Layout
NF Connectors
NFP SERIES
APPLICABLE DIMENSIONS (reference only)
Box Header (1.27mm, Right Angle, Solder Dip)
61
Contact Detail
26, 34, 50 Contacts 16, 20, 40, 60, 80 Contacts
Note: Left half of this PCB layout is identical to Section A
Section A Section B
62
Box Header (1.27 mm, Straight Solder Dip)
NFP SERIES
ORDERING INFORMATION
TYPES OF PLATING
CONNECTOR DIMENSIONS (reference only)
Characteristics
Current Rating: 0.5A
Insulation Resistance: 1,000M½Minimum at 500 VDC
Withstanding Voltage: 500 VAC for 1 minute
Contact Resistance: 15m½Max. at 10mA
Operating Temperature: -20˚C ~ +85˚C
Material and Finish
Insulator: High Temp Thermoplastic-UL94V-0
Contact: Copper Alloy
Plating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Features
1. Straight terminals
2. Variety of plating options
3. Central polarizing key
NFP- ** A-013 4- **
Header Series
No. of Positions
Plating (see below)
Terminal Type:
4: Straight Solder Dip
Box Header
Connector Outline Dimensions
PCB Layout
NF Connectors
NFP SERIES
APPLICABLE DIMENSIONS (reference only)
Box Header (1.27mm, Straight Solder Dip)
63
Contact Detail
26, 34, 50 Contacts 16, 20, 40, 60, 80 Contacts
Note: Left half of this PCB layout is identical to Section A
Section A Section B
64
IDC Transition Header (1.27 mm)
NFP SERIES
ORDERING INFORMATION
TYPES OF PLATING
APPLICABLE CABLES
CONNECTOR DIMENSIONS (reference only)
NFP- *** G- 0100- **
Header Series
No. of Positions
Plating (see below)
3.3mm Terminal Length
Transition Header
Characteristics
Current Rating: 1A
Insulation Resistance: 1,000M½Minimum at 500 VDC
Withstanding Voltage: 500 VAC for 1 minute
Contact Resistance: 15m½Max. at 10mA
Operating Temperature: -20˚C ~ +85˚C
Material and Finish
Insulator: High Temp Thermoplastic-UL94V-0
Contact: Copper Alloy
Plating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Features
1. Unique three-fork IDC contact allows
termination of 0.635mm pitch flat cable
2. Various plating options
• Solid Wire AWG 30
• Stranded Wire AWG 30
• Cable Spacing (0.635mm)
Connector Outline Dimensions
PCB Layout
NF Connectors
NFP SERIES
APPLICABLE DIMENSIONS (reference only)
IDC Transition Header (1.27mm)
65
Contact Detail
66
IDC Receptacle (1.27 mm)
NFS SERIES
ORDERING INFORMATION
TYPES OF PLATING
APPLICABLE CABLES
CONNECTOR DIMENSIONS (reference only)
NFS- *** A-011 *-**
Socket Series
No. of Positions
0: Without Strain Relief
1: With Strain Relief
Plating (see below)
1: With polarity Key
Standard Socket
Characteristics
Current Rating: 1A
Insulation Resistance: 1,000M½Minimum at 500 VDC
Withstanding Voltage: 500 VAC for 1 minute
Contact Resistance: 15m½Max. at 10mA
Operating Temperature: -20˚C ~ +85˚C
Material and Finish
Insulator: High Temp Thermoplastic-UL94V-0
Contact: Copper Alloy
Plating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Accessories Strain Reliefs (see page 86)
Features
1. IDC contact allows termination of
0.635mm pitch flat cable
2. Strain relief available to prevent kinking
and caving
3. Plating options available
4. Central polarizing key
Receptacle
Strain Relief
•Solid Wire AWG 30
• Stranded Wire AWG 30
• Cable Spacing (0.635mm)
67
Connector Outline Dimensions
NF Connectors
NFS SERIES
APPLICABLE DIMENSIONS (reference only)
IDC Receptacle (1.27mm)
Contact Detail
68
Board to Board Receptacle (1.27 mm)
NFS SERIES
ORDERING INFORMATION
TYPES OF PLATING
CONNECTOR DIMENSIONS (reference only)
NFS- ** A-131 4- **
Socket Series
No. of Positions
Terminal Type:
4: Straight Solder Dip
Plating (see below)
With Polarity Key
Characteristics
Current Rating: 1A
Insulation Resistance: 1,000M½Minimum at 500 VDC
Withstanding Voltage: 500 VAC for 1 minute
Contact Resistance: 15m½Max. at 10mA
Operating Temperature: -20˚C ~ +85˚C
Material and Finish
Insulator: High Temp Thermoplastic-UL94V-0
Contact: Copper Alloy
Plating: Mating Face Contacts: Au over Ni
Terminals: Au or SnPb over Ni
Features
1. Straight terminals
2. Terminal length (2.7mm)
Connector Outline Dimensions
PCB Layout
NF Connectors
NFS SERIES
APPLICABLE DIMENSIONS (reference only)
Board to Board Receptacle (1.27mm)
69
Contact Detail
