30 Watts APC08 Total Power: Input Voltages: No. of Outputs: 30W 1.8V - 13V Single (8 Amp) Electrical Specs Input Input range Input Surge Efficiency 1.8-6.0VDC and 5.0-13.0VDC 08 Device: 14V 03 Device: 7V 93%@3.3V Control Enable TTL compatible (positive enable option) Output Regulation (Line, Load, Temp) Special Features * Point of load (POL) applications * High efficiency, 3.3V@93% * -40C to +85C Ambient operating temperature * Open Frame SMT * Positive enable function * Low output ripple and noise * Regulation to zero load * Adjustable Output through external resistor programming * Fixed frequency switching (400 kHz) Ripple and noise Output voltage adjust range Transient Response <3% 100mV (5V and 6V) 75mV (2.5V and 3.3V) 50mV (below 2.5V) 08 Device: 0.9V to 6.2V 03 Device: 0.9V to 3.6V 5% max deviation with 50% to 75% full load 500 S (max) recovery Specifications subject to change without notice. Environmental Operating temperature -40C to +85C Storage temperature: -55C to +125C Demonstrated MTBF: > 2.3 Million Hours Safety UL, cUL 60950 Recognized TUV 1 EN60950 Licensed North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Ordering Information Input Voltage Output Voltage 1.8V-6.0V 1.8V-6.0V 1.8V-6.0V 2.2V-6.0V 3.0V-6.0V 4.0V-6.0V 0.9V 1.2V 1.5V 1.8V 2.5V 3.3V @ @ @ @ @ @ 5.0V-13.0V 5.0V-13.0V 5.0V-13.0V 5.0V-13.0V 5.0V-13.0V 5.0V-13.0V 7.5V-13.0V 8.5V-13.0V 0.9V 1.2V 1.5V 1.8V 2.5V 3.3V 5.0V 6.0V @ @ @ @ @ @ @ @ * Typical Efficiency is Options: suffix suffix suffix Efficiency Full Load Model Number 8A 8A 8A 8A 8A 8A 76% (Typ)* 81% (Typ) 86% (Typ) 88% (Typ) 91% (Typ) 93% (Typ) APC08J03 APC08K03 APC08M03 APC08Y03 APC08G03 APC08F03 8A 8A 8A 8A 8A 8A 5A 4A 75% (Typ) 81% (Typ) 84% (Typ) 86% (Typ) 90% (Typ) 92% (Typ) 94% (Typ) 95% (Typ) APC08J08 APC08K08 APC08M08 APC08Y08 APC08G08 APC08F08 APC05A08New APC04S08New measured at full load, mid range input and at TA=25 C "-9" = Output Trim option "-9MA" = Output Trim with Ishare and PGood options "-J" = Jedec Style Tray Packaging (Default packaging is T&R with no "-J" suffix required) Mechanical Dimensions Tolerances: x.xx +/- 0.02 in (x.x +/- 0.5mm) x.xxx +/- 0.010 in (x.xx +/- 0.25mm Typ Pin Side Down [dimensions in mm] Optional Pins: PGood - Power Good Logic Signal P - Active Current Share Pin Trim - Trim Pin Note: 1. Specifications given are typical values at nominal conditions. 2. The Technical Reference Notes should be consulted for detailed information. 3. Specifications subject to change without notice. Mechanical drawings are for reference only www.astecpower.com 2