No. of Contacts H 1.00 .50 O0 G 1.000.08 1.000.10 Recommended PCB Layout General TOL: 0.05 A0.15 Pin 0.30 sq. 1.000.08 1.20 1.000.10 E 10mm Maximum D0.20 C0.20 F D Specifications Material Insulator: Polymer LCP, UL94V-0, Black Contact: Copper Alloy Plating See Ordering Grid Electrical Current Rating: 1 Amp per pin Contact Resistance: 20 m max. Insulating Resistance: 1000 M min. Dielectric Withstand Voltage: 300V AC 2.30 Ordering Grid C BC035 XX X XXXX XXXX No. of Contacts 04 to 80 A L X Request Samples and Quotation Mechanical & Environmental Operating Temperature: -40C to +105C Soldering Process: IR Reflow: 260C for 10 sec. Wave: 250C for 5-10 sec Manual Solder: 350C for 3-5 sec Packing Options G = Plastic Box (Standard) D = Tube E = Tube with Cap Contact Plating A = Gold Flash All Over (Standard) C = Tin All Over B 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 1.00 B0.25 Insulator Material L = LCP (Standard) Dimension C (1/100mm) (Post Height) 0200 = 2.00mm (Standard) 0380 = 3.80mm (Standard) Mates with(Subject to pin length) BC084 BC085 Dimension D (1/100mm) (Tail Length) 0300 = 3.00mm (Standard) or specify custom Post Height eg. 0250 = 2.50mm Tol +/- 0.2mm (Maximum 0500=5.00mm) (Minimum 0050=0.50mm) or specify custom Tail Length eg. 0250 = 2.50mm Tol +/- 0.2mm (Maximum 0500=5.00mm) (Minimum 0050=0.50mm) Part Number Product Description BC035 1.0mm Pitch Pin Header, Dual Row, Through-Hole, Vertical Drawing Date 20th May 2008 By Detail 1 2 3 4 Revision Date 5 CC Tolerances (Except as Noted) BC035 D PCN D1 18/08/17 X. 0.30 X. 5 X.X 3 X.X 0.20 X.XX 0.15 X.XX 2 X.XXX 0.10 X.XXX 1 Length Angle 6 Units: Metric (mm) C 3rd Angle Projection 7 Dimensions A 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 26.00 27.00 28.00 29.00 30.00 31.00 32.00 33.00 34.00 35.00 36.00 37.00 38.00 39.00 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE B 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 26.00 27.00 28.00 29.00 30.00 31.00 32.00 33.00 34.00 35.00 36.00 37.00 38.00 39.00 40.00 www.gct.co Not to Scale Drawn By ASE 8 Sheet No. 1/1