SMAJ5.0 thru SMAJ188CA
Vishay General Semiconductor
Document Number: 88390
Revision: 29-Oct-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
Surface Mount TRANSZORB® Transient Voltage Suppressors
FEATURES
Low profile package
Ideal for automated placement
Glass passivated chip junction
Available in uni-directional and bi-directional
400 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty
cycle): 0.01 % (300 W above 78 V)
Excellent clamping capability
Very fast response time
Low incremental surge resistance
Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
Solder dip 260 °C, 40 s
Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
MECHANICAL DATA
Case: DO-214AC (SMA)
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, high reliability/
automotive grade (AEC Q101 qualified)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3
suffix meets JESD 201 class 2 whisker test
Polarity: For uni-directional types the band denotes
cathode end, no marking on bi-directional types
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional use C or CA suffix (e.g. SMAJ10C,
SMAJ10CA).
Electrical characteristics apply in both directions.
PRIMARY CHARACTERISTICS
VWM 5.0 V to 188 V
PPPM 400 W, 300 W
IFSM 40 A
TJ max. 150 °C
DO-214AC (SMA)
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2. Rating is 300 W above 78 V
(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL VALUE UNIT
Peak pulse power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1) PPPM 400 W
Peak pulse current with a waveform (1) IPPM See next table A
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I
FSM 40 A
Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C
SMAJ5.0 thru SMAJ188CA
Vishay General Semiconductor
www.vishay.com For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88390
Revision: 29-Oct-08
2
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
DEVICE TYPE
DEVICE MARKING
CODE
BREAKDOWN
VOLTAGE
V
BR
AT I
T
(1)
(V)
TEST
CURRENT
I
T
(mA)
STAND-OFF
VOLTAGE
V
WM
(V)
MAXIMUM
REVERSE
LEAKAGE
AT V
WM
I
D
(µA)
(3)
MAXIMUM
PEAK PULSE
SURGE
CURRENT
I
PPM
(A)
(2)
MAXIMUM
CLAMPING
VOLTAGE AT
I
PPM
V
C
(V)
UNI BI
MIN. MAX.
SMAJ5.0 AD WD 6.40 7.82 10 5.0 800 41.7 9.6
SMAJ5.0A(5) AE WE 6.40 7.07 10 5.0 800 43.5 9.2
SMAJ6.0 AF WF 6.67 8.15 10 6.0 800 35.1 11.4
SMAJ6.0A AG WG 6.67 7.37 10 6.0 800 38.8 10.3
SMAJ6.5 AH WH 7.22 8.82 10 6.5 500 32.5 12.3
SMAJ6.5A AK WK 7.22 7.98 10 6.5 500 35.7 11.2
SMAJ7.0 AL WL 7.78 9.51 10 7.0 200 30.1 13.3
SMAJ7.0A AM WM 7.78 8.60 10 7.0 200 33.3 12.0
SMAJ7.5 AN WN 8.33 10.2 1.0 7.5 100 28.0 14.3
SMAJ7.5A AP WP 8.33 9.21 1.0 7.5 100 31.0 12.9
SMAJ8.0 AQ WQ 8.89 10.9 1.0 8.0 50 26.7 15.0
SMAJ8.0A AR WR 8.89 9.83 1.0 8.0 50 29.4 13.6
SMAJ8.5 AS WS 9.44 11.5 1.0 8.5 10 25.2 15.9
SMAJ8.5A AT WT 9.44 10.4 1.0 8.5 10 27.8 14.4
SMAJ9.0 AU WU 10.0 12.2 1.0 9.0 5.0 23.7 16.9
SMAJ9.0A AV WV 10.0 11.1 1.0 9.0 5.0 26.0 15.4
SMAJ10 AW WW 11.1 13.6 1.0 10 1.0 21.3 18.8
SMAJ10A AX WX 11.1 12.3 1.0 10 1.0 23.5 17.0
SMAJ11 AY WY 12.2 14.9 1.0 11 1.0 19.9 20.1
SMAJ11A AZ WZ 12.2 13.5 1.0 11 1.0 22.0 18.2
SMAJ12 BD XD 13.3 16.3 1.0 12 1.0 18.2 22.0
SMAJ12A BE XE 13.3 14.7 1.0 12 1.0 20.1 19.9
SMAJ13 BF XF 14.4 17.6 1.0 13 1.0 16.8 23.8
SMAJ13A BG XG 14.4 15.9 1.0 13 1.0 18.6 21.5
SMAJ14 BH XH 15.6 19.1 1.0 14 1.0 15.5 25.8
SMAJ14A BK XK 15.6 17.2 1.0 14 1.0 17.2 23.2
SMAJ15 BL XL 16.7 20.4 1.0 15 1.0 14.9 26.9
SMAJ15A BM XM 16.7 18.5 1.0 15 1.0 16.4 24.4
SMAJ16 BN XN 17.8 21.8 1.0 16 1.0 13.9 28.8
SMAJ16A BP XP 17.8 19.7 1.0 16 1.0 15.4 26.0
SMAJ17 BQ XQ 18.9 23.1 1.0 17 1.0 13.1 30.5
SMAJ17A BR XR 18.9 20.9 1.0 17 1.0 14.5 27.6
SMAJ18 BS XS 20.0 24.4 1.0 18 1.0 12.4 32.2
SMAJ18A BT XT 20.0 22.1 1.0 18 1.0 13.7 29.2
SMAJ20 BU XU 22.2 27.1 1.0 20 1.0 11.2 35.8
SMAJ20A BV XV 22.2 24.5 1.0 20 1.0 12.3 32.4
SMAJ22 BW XW 24.4 29.8 1.0 22 1.0 10.2 39.4
SMAJ22A BX XX 24.4 26.9 1.0 22 1.0 11.3 35.5
SMAJ24 BY XY 26.7 32.6 1.0 24 1.0 9.3 43.0
SMAJ24A BZ XZ 26.7 29.5 1.0 24 1.0 10.3 38.9
SMAJ26 CD YD 28.9 35.3 1.0 26 1.0 8.6 46.6
SMAJ26A CE YE 28.9 31.9 1.0 26 1.0 9.5 42.1
SMAJ28 CF YF 31.1 38.0 1.0 28 1.0 8.0 50.0
SMAJ28A CG YG 31.1 34.4 1.0 28 1.0 8.8 45.4
SMAJ30 CH YH 33.3 40.7 1.0 30 1.0 7.5 53.5
SMAJ30A CK YK 33.3 36.8 1.0 30 1.0 8.3 48.4
SMAJ33 CL YL 36.7 44.9 1.0 33 1.0 6.8 59.0
SMAJ33A CM YM 36.7 40.6 1.0 33 1.0 7.5 53.3
SMAJ36 CN YN 40.0 48.9 1.0 36 1.0 6.2 64.3
SMAJ36A CP YP 40.0 44.2 1.0 36 1.0 6.9 58.1
SMAJ40 CQ YQ 44.4 54.3 1.0 40 1.0 5.6 71.4
SMAJ5.0 thru SMAJ188CA
Vishay General Semiconductor
Document Number: 88390
Revision: 29-Oct-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
3
Notes:
(1) Pulse test: tp 50 ms
(2) Surge current waveform per Fig. 3 and derate per Fig. 2
(3) For bi-directional types having VWM of 10 V and less, the ID limit is doubled
(4) All terms and symbols are consistent with ANSI/IEEE C62.35
(5) For the bi-directional SMAJ5.0CA, the maximum VBR is 7.25 V
(6) VF = 3.5 V at IF = 25 A (uni-directional only)
SMAJ40A CR YR 44.4 49.1 1.0 40 1.0 6.2 64.5
SMAJ43 CS YS 47.8 58.4 1.0 43 1.0 5.2 76.7
SMAJ43A CT YT 47.8 52.8 1.0 43 1.0 5.8 69.4
SMAJ45 CU YU 50.0 61.1 1.0 45 1.0 5.0 80.3
SMAJ45A CV YV 50.0 55.3 1.0 45 1.0 5.5 72.7
SMAJ48 CW YW 53.3 65.1 1.0 48 1.0 4.7 85.5
SMAJ48A CX YX 53.3 58.9 1.0 48 1.0 5.2 77.4
SMAJ51 CY YY 56.7 69.3 1.0 51 1.0 4.4 91.1
SMAJ51A CZ YZ 56.7 62.7 1.0 51 1.0 4.9 82.4
SMAJ54 RD ZD 60.0 73.3 1.0 54 1.0 4.2 96.3
SMAJ54A RE ZE 60.0 66.3 1.0 54 1.0 4.6 87.1
SMAJ58 RF ZF 64.4 78.7 1.0 58 1.0 3.9 103
SMAJ58A RG ZG 64.4 71.2 1.0 58 1.0 4.3 93.6
SMAJ60 RH ZH 66.7 81.5 1.0 60 1.0 3.7 107
SMAJ60A RK ZK 66.7 73.7 1.0 60 1.0 4.1 96.8
SMAJ64 RL ZL 71.1 86.9 1.0 64 1.0 3.5 114
SMAJ64A RM ZM 71.1 78.6 1.0 64 1.0 3.9 103
SMAJ70 RN ZN 77.8 95.1 1.0 70 1.0 3.2 125
SMAJ70A RP ZP 77.8 86.0 1.0 70 1.0 3.5 113
SMAJ75 RQ ZQ 83.3 102 1.0 75 1.0 3.0 134
SMAJ75A RR ZR 83.3 92.1 1.0 75 1.0 3.3 121
SMAJ78 RS ZS 86.7 106 1.0 78 1.0 2.9 139
SMAJ78A RT ZT 86.7 95.8 1.0 78 1.0 3.2 126
SMAJ85 RU ZU 94.4 115 1.0 85 1.0 2.0 151
SMAJ85A RV ZV 94.4 104 1.0 85 1.0 2.2 137
SMAJ90 RW ZW 100 122 1.0 90 1.0 1.9 160
SMAJ90A RX ZX 100 111 1.0 90 1.0 2.1 146
SMAJ100 RY ZY 111 136 1.0 100 1.0 1.7 179
SMAJ100A RZ ZZ 111 123 1.0 100 1.0 1.9 162
SMAJ110 VD VD 122 149 1.0 110 1.0 1.5 196
SMAJ110A SE VE 122 135 1.0 110 1.0 1.7 177
SMAJ120 SF VF 133 163 1.0 120 1.0 1.4 214
SMAJ120A VG VG 133 147 1.0 120 1.0 1.6 193
SMAJ130 SH VH 144 176 1.0 130 1.0 1.3 231
SMAJ130A VK VK 144 159 1.0 130 1.0 1.4 209
SMAJ150 SL VL 167 204 1.0 150 1.0 1.1 268
SMAJ150A VM VM 167 185 1.0 150 1.0 1.2 243
SMAJ160 SN VN 178 218 1.0 160 1.0 1.0 287
SMAJ160A SP VP 178 197 1.0 160 1.0 1.2 259
SMAJ170 SQ VQ 189 231 1.0 170 1.0 0.99 304
SMAJ170A SR VR 189 209 1.0 170 1.0 1.09 275
SMAJ188 ST VT 209 255 1.0 188 1.0 0.90 344
SMAJ188A SS VS 209 231 1.0 188 1.0 0.91 328
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
DEVICE TYPE
DEVICE MARKING
CODE
BREAKDOWN
VOLTAG E
V
BR
AT I
T
(1)
(V)
TEST
CURRENT
I
T
(mA)
STAND-OFF
VOLTAG E
V
WM
(V)
MAXIMUM
REVERSE
LEAKAGE
AT V
WM
I
D
(µA)
(3)
MAXIMUM
PEAK PULSE
SURGE
CURRENT
I
PPM
(A)
(2)
MAXIMUM
CLAMPING
VOLTAG E AT
I
PPM
V
C
(V)
UNI BI
MIN. MAX.
SMAJ5.0 thru SMAJ188CA
Vishay General Semiconductor
www.vishay.com For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88390
Revision: 29-Oct-08
4
Note:
(1) Mounted on minimum recommended pad layout
Note:
(1) Automotive grade AEC Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL VALUE UNIT
Typical thermal resistance, junction to ambient (1) R
θJA 120 °C/W
Typical thermal resistance, junction to lead RθJL 30 °C/W
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
SMAJ5.0A-E3/61 0.064 61 1800 7" diameter plastic tape and reel
SMAJ5.0A-E3/5A 0.064 5A 7500 13" diameter plastic tape and reel
SMAJ5.0AHE3/61 (1) 0.064 61 1800 7" diameter plastic tape and reel
SMAJ5.0AHE3/5A (1) 0.064 5A 7500 13" diameter plastic tape and reel
Figure 1. Peak Pulse Power Rating Curve
Figure 2. Pulse Power or Current vs. Initial Junction Temperature
0.1
1
10
100
SMAJ5.0 -
SMAJ78
SMAJ85 -
SMAJ188
P
PPM
- Peak Pulse Power (kW)
td - Pulse Width (s)
0.2 x 0.2" (5.0 x 5.0 mm)
Copper Pad Areas
Non-Repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
0 25 50 75 100
100
75
50
25
0
125 150 175 200
TJ - Initial Temperature (°C)
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage, %
Figure 3. Pulse Waveform
Figure 4. Typical Junction Capacitance
0
50
100
1
5
0
td
0 1.0 2.0 3.0 4.0
I
PPM
- Peak Pulse Current, % I
RSM
t - Time (ms)
tr = 10 µs
Peak Value
IPPM
Half Value -
IPPM
IPP
2
10/1000 µs Waveform
as defined by R.E.A.
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
10
100
1000
10 000
101 100 200
Uni-Directional
Bi-Directional
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Measured at
Stand-Off
Voltage VWM
C
J
- Junction Capacitance (pF)
VWM - Reverse Stand-Off Voltage (V)
SMAJ5.0 thru SMAJ188CA
Vishay General Semiconductor
Document Number: 88390
Revision: 29-Oct-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
5
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Figure 5. Typical Transient Thermal Impedance
1
10
100
1000
0.001 0.01 0.1 1.0 10 100 1000
t
p
- Pulse Duration (s)
Transient Thermal Impedance (°C/W)
Figure 6. Maximum Non-Repetitive Forward Surge Current
Uni-Directional Only
101 5 50 100
10
50
100
200
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
T
J
= T
J
max.
8.3 ms Single Half Sine-Wave
0.030 (0.76)
0.060 (1.52)
0.008 (0.203)
0.194 (4.93)
0.208 (5.28)
0.157 (3.99)
0.177 (4.50)
0.100 (2.54)
0.110 (2.79)
0.078 (1.98)
0.090 (2.29)
0.006 (0.152)
0.012 (0.305)
0.049 (1.25)
0.065 (1.65)
Cathode Band
0 (0)
DO-214AC (SMA)
Mounting Pad Layout
0.074 (1.88)
MAX.
0.208 (5.28)
REF.
0.066 (1.68)
MIN.
0.060 (1.52)
MIN.
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.