55
G3VM-41HRG3VM-41HR
■Absolute Maximum Ratings (Ta = 25°C)
■Electrical Characteristics (Ta = 25°C)
■Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
■Engineering Data
Load Current vs. Ambient Temperature
G3VM-41HR
■Safety Precautions
Refer to “Common Precautions” for all G3VM models.
Item Symbol Rating Unit Measurement Conditions
Input LED forward current IF30 mA
LED forward current reduction rate ∆ IF/°C−0.3 mA/°CTa ≥ 25°C
LED reverse voltage VR5V
Connection temperature Tj125 °C
Output Load voltage (AC peak/DC) VOFF 40 V
Continuous load
current
Connection A IO2.5 A Connection A: AC peak/DC
Connection B and C: DC
Connection B 2.5
Connection C 5
ON current reduction
rate
Connection A ∆ IIO/°C−33.3 mA/°CTa ≥ 50°C
Connection B −33.3
Connection C −66.7
Pulse on current Iop 7.5 A t = 100 ms
Connection temperature Tj125 °C
Dielectric strength between input and
output (See note 1.)
VI-O 1,500 Vrms AC for 1 min
Operating temperature Ta−40 to +85 °C With no icing or condensation
Storage temperature Tstg −55 to +125 °C With no icing or condensation
Soldering temperature (10 s) --- 260 °C 10 s
Load
or AC
DC
1
2
3
6
5
4
1
2
3
6
5
4
Load
DC
DC
Load
Connection Diagram
Connection
A
Connection
B
Connection
C
1
2
3
6
5
4
Note: 1. The dielectric strength between the in-
put and output was checked by apply-
ing voltage between all pins as a
group on the LED side and all pins as
a group on the light-receiving side.
Item Symbol Mini-
mum
Typical Maxi-
mum
Unit Measurement
conditions
Input LED forward voltage VF1.18 1.33 1.48 V IF = 10 mA
Reverse current IR--- --- 10 µAV
R = 5 V
Capacity between terminals CT--- 70 --- pF V = 0, f = 1 MHz
Trigger LED forward current IFT --- 0.4 3 mA IO = 100 mA
Output Maximum resistance
with output ON
Connection A RON --- 0.03 0.06 ΩIF = 5 mA, IO = 2 A, t < 1S
Connection B --- 0.015 0.03 ΩIF = 5 mA, IO = 2 A, t < 1S
Connection C --- 0.008 --- ΩIF = 5 mA, IO = 4 A, t < 1S
Current leakage when the relay is
open
ILEAK --- --- 10 nA VOFF = 40 V
Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V
Insulation resistance RI-O 1,000 --- --- MΩVI-O = 500 VDC,
RoH ≤ 60%
Turn-ON time tON --- 1.0 5.0 ms IF = 5 mA, RL = 200 Ω,
VDD = 20 V (See note 2.)
Turn-OFF time tOFF --- 0.15 1.0 ms
VOUT
IF
tON tOFF
10% 90%
IF1
2
6
4
RLVDD
VOUT
Note: 2. Turn-ON and Turn-OFF
Times
Item Symbol Minimum Typical Maximum Unit
Load voltage (AC peak/DC) VDD --- --- 40 V
Operating LED forward current IF57.520mA
Continuous load current (AC peak/DC) IO--- --- 2 A
Operating temperature Ta−20 --- 65 °C
6
5
4
3
2
1
0−20 0 20 40 60 80 100
Ambient temperature (°C)
Load current (A)
Connection C
Connection A, Connection B