SILICON HIGH POWER
NPN TRANSISTOR
Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice.
Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However
Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to
verify that datasheets are current before placing orders.
Semelab
Semelab Semelab
Semelab Limited
LimitedLimited
Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 7506
Issue 4
Page 1 of 3
2N5672
High Current Rating
Hermetic TO3 Metal Package.
Designed For High Speed Switching Applications
Screening Options Available
ABSOLUTE MAXIMUM RATINGS
(TC = 25°C unless otherwise stated)
VCBO Collector – Base Voltage 150V
VCEO Collector – Emitter Voltage 120V
VEBO Emitter – Base Voltage 7.0V
IC Continuous Collector Current 30A
IB Base Current 10A
PD Total Power Dissipation at TA = 25°C 6W
Derate Above 25°C 34mW/°C
PD Total Power Dissipation at TC = 25°C 140W
Derate Above 25°C 800mW/°C
TJ Junction Temperature Range -65 to +200°C
Tstg Storage Temperature Range -65 to +200°C
THERMAL PROPERTIES
Symbols Parameters Max. Units
RθJC
Thermal Resistance, Junction To Case 1.25 °C/W
SILICON HIGH POWER
NPN TRANSISTOR
2N5672
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 7506
Issue 4
Page 2 of 3
ELECTRICAL CHARACTERISTICS
(TC = 25°C unless otherwise stated)
Symbols Parameters Test Conditions Min.
Typ Max.
Units
V(BR)CEO
(1)
Collector-Emitter
Breakdown Voltage IC = 50mA IB = 0 120
V
V(BR)CEX Collector-Emitter
Breakdown Voltage IC = 10mA VBE = -1.5V 150
V(BR)CER
(1)
Collector-Emitter
Breakdown Voltage IC = 10mA RBE = 50 140
ICEX Collector-Emitter Cut-Off
Current VCE = 135V VBE = -1.5V
10
mA
ICEO Collector-Emitter Cut-Off
Current
VCE = 80V IB = 0 10
IEBO Emitter Cut-Off Current VEB = 7.0V IC = 0 10
hFE
(1)
DC Current Gain
IC = 20A VCE = 5.0V 20
IC = 15A VCE = 2.0V 20 100
VBE
(1)
Base-Emitter Voltage IC = 15A VCE = 5.0V 1.6
V
VCE(sat)
(1)
Collector-Emitter Saturation
Voltage IC = 15A IB = 1.2A 0.75
VBE(sat)
(1)
Base-Emitter Saturation
Voltage IC = 15A IB = 1.2A 1.5
DYNAMIC CHARACTERISTICS
fT Transition Frequency
IC = 2.0A VCE = 10V
30 MHz
f = 5.0MHz
Cobo Output Capacitance
VCB = 10V IE = 0
900 pF
f = 1.0MHz
ton Turn-on Time VCC = 30V IC = 15A
IB1 = -IB2 = 1.2A
0.5
µs
toff Turn-off Time 2.0
Notes
NotesNotes
Notes
(1) Pulse Width 380us, δ 2%
SILICON HIGH POWER
NPN TRANSISTOR
2N5672
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 7506
Issue 4
Page 3 of 3
MECHANICAL DATA
Dimensions in mm (inches)
TO3 (TO-204AA)
Pin 1 - Base Pin 2 - Emitter Case - Collector