DATA SHEET PHOTOCOUPLER PS2533-1,-2,-4,PS2533L-1,-2,-4 HIGH COLLECTOR TO EMITTER VOLTATGE HIGH ISOLATION VOLTAGE MULTI PHOTOCOUPLER SIRIES -NEPOC TM Series- DESCRIPTION The PS2533-1, -2, -4 and PS2533L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington connected phototransistor. The PS2533-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2533L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. FEATURES * High collector to emitter voltage (VCEO = 350 V) * High Isolation voltage BV = 5 000 Vr.m.s.: standard products BV = 3 750 Vr.m.s.: VDE0884 approved products (Option) * High current transfer ratio (CTR = 4 000 % TYP.) * High-speed switching (tr, tf = 100 s TYP.) * Ordering number of taping product: PS2533L-1-E3, E4, F3, F4, PS2533L-2-E3, E4 * UL approved: File No. E72422 (S) * BSI approved: No. 8221/8222 * NEMKO approved: No. 98101708 * SEMKO approved: No. 9824187/01-02 * DEMKO approved: No. 307863 * FIMKO approved: No. F1 11397 * VDE0884 approved (Option) APPLICATIONS * Telephone, Exchange equipment * FAX/MODEM The information in this document is subject to change without notice. Document No. P11435EJ5V0DS00 (5th edition) Date Published September 1998 NS CP(K) Printed in Japan The mark * shows major revised points. (c) 1990 PS2533-1,-2,-4,PS2533L-1,-2,-4 PACKAGE DIMENSIONS (in millimeters) DIP type PS2533-1 5.1 MAX. PS2533-2 10.2 MAX. TOP VIEW 4 8 7 6 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 2 1 2 3 4 0.65 3.8 MAX. 0.65 0 to 15 3.8 MAX. 7.62 2.8 MIN. 4.55 MAX. 7.62 2.8 MIN. 4.55 MAX. 5 6.5 6.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 TOP VIEW 3 0 to 15 1.250.15 1.250.15 0.500.10 0.25 M 2.54 0.500.10 0.25 M 2.54 PS2533-1 (NEW PACKAGE) PS2533-4 TOP VIEW 4.60.35 6.5 20.3 MAX. 13 12 11 1 2 3 4 5 6 6.5 2 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 0 to 15 1.250.15 0.500.10 0.25 M 0.65 3.8 MAX. 7.62 2.8 MIN. 4.55 MAX. 0.65 3.8 MAX. 7.62 2.8 MIN. 4.55 MAX. 14 10 9 7 8 3 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 15 TOP VIEW 4 2.54 16 1.250.15 0 to 15 2.54 0.500.10 0.25 M Anode Cathode Emitter Collector PS2533-1,-2,-4,PS2533L-1,-2,-4 Lead bending type PS2533L-1 10.2 MAX. TOP VIEW 4 TOP VIEW 3 8 1 3 4 7.62 1.250.15 0.90.25 2.54 2 3.8 MAX. 3.8 MAX. 7.62 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 2 0.05 to 0.2 1 6 6.5 6.5 1. Anode 2. Cathode 3. Emitter 4. Collector 7 0.05 to 0.2 5.1 MAX. PS2533L-2 0.25 M 9.600.4 0.90.25 2.54 9.600.4 1.250.15 0.25 M PS2533L-1 (NEW PACKAGE) PS2533L-4 TOP VIEW 4.60.35 16 15 14 13 12 11 1 2 3 4 5 6 10 9 7 8 TOP VIEW 4 3 6.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 2 Anode Cathode Emitter Collector 0.90.25 2.54 9.600.4 1.250.15 0.25 M 0.05 to 0.2 7.62 3.8 MAX. 3.8 MAX. 7.62 0.05 to 0.2 6.5 1 20.3 MAX. 0.90.25 2.54 9.600.4 1.250.15 0.25 M 3 PS2533-1,-2,-4,PS2533L-1,-2,-4 Lead bending type for long distance PS2533L1-1 PS2533L2-1 5.1 MAX. 5.1 MAX. TOP VIEW 4 6.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 TOP VIEW 3 3 1. Anode 2. Cathode 3. Emitter 4. Collector 6.5 4 2 1 2 10.16 10.16 7.62 0.250.2 3.8 MAX. 3.8 MAX. 0.35 2.8 MIN. 4.25 MAX. 7.62 1.250.15 0.25 M 0 to 15 0.90.25 2.54 12.0 MAX. 1.250.15 2.54 0.500.10 0.25 M PS2533L1 PS2533L2 4.60.35 4.60.35 1.00.2 1.00.2 TOP VIEW TOP VIEW 4 3 6.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 7.62 0.35 3.8 MAX. 3.8 MAX. 0.250.2 7.62 3.2 MIN. 4.25 MAX. 2 10.16 10.16 0 to 15 1.250.15 0.500.10 0.25 M 2.54 4 3 6.5 4 1.250.15 0.25 M 0.90.25 2.54 12.0 MAX. PS2533-1,-2,-4,PS2533L-1,-2,-4 ORDERING INFORMATION Part Number Application Part Number Package Safety Standard Approval PS2533-1 PS2533L-1 PS2533L1-1 PS2533L2-1 4-pin DIP 4-pin DIP (lead bending surface mount) 4-pin DIP (for long distance) 4-pin DIP (for long distance surface mount) Standard products (UL, BSI, NEMKO, SEMKO, DEMKO, FIMKO approved) PS2533-2 PS2533L-2 8-pin DIP 8-pin DIP (lead bending surface mount) PS2533-2 PS2533-4 PS2533L-4 16-pin DIP 16-pin DIP (lead bending surface mount) PS2533-4 PS2533-1-V PS2533L-1-V PS2533L1-1-V PS2533L2-1-V 4-pin DIP 4-pin DIP (lead bending surface mount) 4-pin DIP (for long distance) 4-pin DIP (for long distance surface mount) PS2533-2-V PS2533L-2-V 8-pin DIP 8-pin DIP (lead bending surface mount) PS2533-2 PS2533-4-V PS2533L-4-V 16-pin DIP 16-pin DIP (lead bending surface mount) PS2533-4 VDE0884 approved products (Option) *1 PS2533-1 PS2533-1 *1 As applying to Safety Standard, following part number should be used. 5 PS2533-1,-2,-4,PS2533L-1,-2,-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Ratings Diode Parameter Symbol Forward Current (DC) IF 80 mA Reverse Voltage VR 6 V Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 PS2533-2, -4, PS2533L-2, -4 PS2533-1, PS2533L-1 Unit PD/C 1.5 1.2 mWC PD 150 120 mW/ch IFP 1 A Collector to Emitter Voltage VCEO 350 V Emitter to Collector Voltage VECO 0.6 V IC 150 mA/ch Collector Current Power Dissipation Derating Power Dissipation PC/C 3.0 PC 300 2.4 mW/C 240 mW/ch BV 5 000 *3 3 750 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Isolation Voltage *2 *1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output *3 VDE0884 approved products (Option) 6 PS2533-1,-2,-4,PS2533L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz MIN. TYP. MAX. Unit 1.15 1.40 V 5 A 30 pF Transistor Collector to Emitter Dark Current ICEO VCE = 350 V, IF = 0 mA Coupled Current Transfer Ratio (IC/IF) CTR IF = 1 mA, VCE = 2 V Collector Saturation Voltage VCE (sat) IF = 1 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.6 pF *1 tr VCC = 5 V, IC = 10 mA, RL = 100 100 s Rise Time Fall Time *1 1 500 4 000 nA 6 500 % 1.0 V 11 10 tf 400 100 *1 Test circuit for switching time Pulse input VCC (PW = 1 ms, Duty cycle = 1/10) IF 50 VOUT RL = 100 7 PS2533-1,-2,-4,PS2533L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 150 PS2533-1 PS2533L-1 100 1.5 mW/C PS2533-2, -4 PS2533L-2, -4 50 1.2 mW/C 0 25 50 75 100 125 300 PS2533-1 PS2533L-1 200 PS2533-2, -4 PS2533L-2, -4 3.0 mW/C 100 2.4 mW/C 0 150 25 50 75 100 FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 160 TA = +100 C +75 C +50 C 140 Collector Current IC (mA) 10 +25 C 0 C -25 C -55 C 1 0.1 0.01 0.6 0.8 1.0 1.2 1.4 1.6 5.0 120 4.5 mA mA A m 4.0 mA 5 . 3 mA 3.0 mA 2.5 A 2.0 m 100 80 1.5 mA 60 1.0 mA 40 0 IF = 0.5 mA 1 2 3 4 5 6 7 8 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 500 VCE = 350 V 1 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (A) 150 Ambient Temperature TA (C) 20 100 n 10 n 1n 100 p -50 -25 0 25 50 Ambient Temperature TA (C) 8 125 Ambient Temperature TA (C) 100 Forward Current IF (mA) 400 75 100 mA IF = 5.0 A 2.0 m 1.0 mA 100 50 0.5 mA 10 5 1 0.5 0.1 0.0 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE(sat) (V) 1.2 PS2533-1,-2,-4,PS2533L-1,-2,-4 ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, 5 000 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 C, IF = 1 mA, VCE = 2 V 0.2 0.0 -50 -25 0 25 50 75 4 000 VCE = 2 V Sample A Sample B 3 000 2 000 1 000 0 0.1 100 0.5 1 5 10 15 Ambient Temperature TA (C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE 5 VCC = 10 V, IC = 10 mA tr 0 100 td 50 tf 10 5 ts 1 20 Current Transfer Ratio CTR (%) 1.2 500 Switching Time t (s) CURRENT TRANSFER RATIO vs. FORWARD CURRENT Normalized Gain Gv Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 50 100 200 500 2k 100 10 -10 VCE = 4 V, Vin = 0.1 Vp-p -15 -20 -25 1k RL = 1 k -5 -30 0.01 1 k 1 F Vin 47 0.1 RL Vout 1 10 100 Frequency f (kHz) Load Resistance RL () LONG TERM CTR DEGRADATION 1.2 CTR (Relative Value) 1.0 IF = 1 mA, TA = 25 C 0.8 IF = 1 mA, TA = 60 C 0.6 0.4 0.2 0.0 10 102 103 104 105 106 Time (Hr) Remark The graphs indicate nominal characteristics. 9 PS2533-1,-2,-4,PS2533L-1,-2,-4 TAPING SPECIFICATIONS (in millimeters) 4.30.2 10.30.1 7.50.1 1.550.1 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 0.3 1.550.1 5.60.1 8.00.1 Tape Direction PS2533L-1-E3, F3 PS2533L-1-E4, F4 R 1.0 21.00.8 80.05.0 2.00.5 13.00.5 PS2533L-1-E3, E4: 250 PS2533L-1-F3, F4: 330 Outline and Dimensions (Reel) 16.4+2.0 -0.0 Packing: PS2533L-1-E3, E4 1 000 pcs/reel PS2533L-1-F3, F4 2 000 pcs/reel 10 PS2533-1,-2,-4,PS2533L-1,-2,-4 4.30.2 10.30.1 7.50.1 1.550.1 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 0.3 10.40.1 1.550.1 12.00.1 Tape Direction PS2533L-2-E3 PS2533L-2-E4 Outline and Dimensions (Reel) 21.00.8 80.05.0 R 1.0 330 2.00.5 13.00.5 16.4+2.0 -0.0 Packing: 1 000 pcs/reel 11 PS2533-1,-2,-4,PS2533L-1,-2,-4 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature 235 C (package surface temperature) * Time of temperature higher than 210 C 30 seconds or less * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 C (peak temperature) 210 C to 30 s 120 to 160 C 60 to 90 s (preheating) Time (s) Peak temperature 235 C or below (2) Dip soldering * Temperature 260 C or below (molten solder temperature) * Time 10 seconds or less * Number of times One * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 12 PS2533-1,-2,-4,PS2533L-1,-2,-4 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884) Parameter Symbol Application classification (DIN VDE 0109) for rated line voltages 300 Vr.m.s. for rated line voltages 600 Vr.m.s. Unit IV III Climatic test class (DIN IEC 68 Teil 1/09.80) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.2 x UIORM, Pd < 5 pC Speck 55/100/21 UIORM Upr 890 1 068 Vpeak Vpeak Test voltage (partial discharge test, procedure b for random test) Upr = 1.6 x UIORM, Pd < 5 pC Upr 1 424 Vpeak Highest permissible overvoltage UTR 6 000 Vpeak Degree of pollution (DIN VDE 0109) 2 Clearance distance > 7.0 mm Creepage distance > 7.0 mm Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI Material group (DIN VDE 0109) 175 III a Storage temperature range Tstg -55 to +150 C Operating temperature range TA -55 to +100 C Ris MIN. Ris MIN. 10 11 10 Tsi Isi Psi 175 400 700 C mA mW Ris MIN. 10 Isolation resistance, minimum value VIO = 500 V dc at TA = 25 C VIO = 500 V dc at TA MAX. at least 100 C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = 175 C (Tsi) 12 9 13 PS2533-1,-2,-4,PS2533L-1,-2,-4 APPLICATION FOR TELEPHONE (EXAMPLE) LINE Bell Ringing Signal (75 Vr.m.s., 16 Hz) PS2505-1, PS2506-1 PS2605, PS2606 PS2607, PS2608 etc. PS2521 PS2525 VCC Bell Ringing Detect Line Observe VCC Dial Pulse PS2532 Generator PS2533 Dialer Circuit CPU Photo MOS FET Speech Circuit IN OUT 14 PS2533-1,-2,-4,PS2533L-1,-2,-4 [MEMO] 15 PS2533-1,-2,-4,PS2533L-1,-2,-4 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEPOC is a trademark of NEC Corporation. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. M4 96. 5