https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page1/17
Installation terminal block-UIK 35-3006182
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Installation terminal block, Screw connection, cross section:0.75 mm²-35 mm², AWG:18-2, width:15.2 mm,
color:gray, mounting type: NS 35/7,5, NS 35/15, NS 32
Your advantages
Installation terminal blocks with a particularly low-profile design for use in flat distributors
The asymmetrical arrangement of the terminal blocks on the DIN rail enables the neutral busbar to be routed past the terminal blocks
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4017918091408
Weight per Piece (excluding packing) 46.450 g
Custom tariff number 85369010
Country of origin China
Technical data
General
Number of levels 1
Number of connections 2
Nominal cross section 35 mm²
Color gray
Insulating material PA
Flammability rating according to UL 94 V2
Maximum load current 125 A (with 35 mm² conductor cross section)
Rated surge voltage 8 kV
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page2/17
Installation terminal block-UIK 35-3006182
Technical data
General
Degree of pollution 3
Overvoltage category III
Insulating material group I
Maximum power dissipation for nominal condition 4.06 W
Connection in acc. with standard IEC 60947-7-1
Nominal current IN125 A
Maximum load current 125 A (with 35 mm² conductor cross section)
Nominal voltage UN800 V
Open side panel No
Shock protection test specification IEC 60529:2001-02
Back of the hand protection guaranteed
Result of surge voltage test Test passed
Surge voltage test setpoint 9.8 kV
Result of power-frequency withstand voltage test Test passed
Power frequency withstand voltage setpoint 2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection) Test passed
Result of bending test Test passed
Bending test rotation speed 10 rpm
Bending test turns 135
Bending test conductor cross section/weight 0.75 mm² / 0.4 kg
35 mm² / 6.8 kg
Tensile test result Test passed
Conductor cross section tensile test 0.75 mm²
Tractive force setpoint 30 N
Conductor cross section tensile test 35 mm²
Tractive force setpoint 190 N
Result of tight fit on support Test passed
Tight fit on carrier NS 32/NS 35
Setpoint 10 N
Result of voltage-drop test Test passed
Requirements, voltage drop ≤ 3.2 mV
Result of temperature-rise test Test passed
Short circuit stability result Test passed
Conductor cross section short circuit testing 35 mm²
Short-time current 4.2 kA
Result of thermal test Test passed
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page3/17
Installation terminal block-UIK 35-3006182
Technical data
General
Proof of thermal characteristics (needle flame) effective duration 30 s
Relative insulation material temperature index (Elec., UL 746 B) 130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold -60 °C
Behavior in fire for rail vehicles (DIN 5510-2) Test passed
Flame test method (DIN EN 60695-11-10) V0
Oxygen index (DIN EN ISO 4589-2) >32 %
NF F16-101, NF F10-102 Class I 2
NF F16-101, NF F10-102 Class F 2
Surface flammability NFPA 130 (ASTM E 162) passed
Specific optical density of smoke NFPA 130 (ASTM E 662) passed
Smoke gas toxicity NFPA 130 (SMP 800C) passed
Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Dimensions
Width 15.2 mm
Length 55 mm
Height NS 35/7,5 51 mm
Height NS 35/15 58.5 mm
Height NS 32 56 mm
Connection data
Note Terminal point
Conductor cross section solid min. 0.75 mm²
Conductor cross section solid max. 35 mm²
Conductor cross section flexible min. 0.75 mm²
Conductor cross section flexible max. 35 mm²
Conductor cross section AWG min. 18
Conductor cross section AWG max. 2
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.75 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 35 mm²
2 conductors with same cross section, solid min. 0.75 mm²
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page4/17
Installation terminal block-UIK 35-3006182
Technical data
Connection data
2 conductors with same cross section, solid max. 10 mm²
2 conductors with same cross section, stranded min. 0.75 mm²
2 conductors with same cross section, stranded max. 10 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min. 0.75 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max. 10 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, min. 0.75 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, max. 6 mm²
Connection method Screw connection
Stripping length 16 mm
Screw thread M6
Tightening torque, min 3.2 Nm
Tightening torque max 3.7 Nm
Standards and Regulations
Connection in acc. with standard CSA
IEC 60947-7-1
Flammability rating according to UL 94 V2
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0 27141120
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page5/17
Installation terminal block-UIK 35-3006182
Classifications
eCl@ss
eCl@ss 4.1 27141120
eCl@ss 5.0 27141120
eCl@ss 5.1 27141100
eCl@ss 6.0 27141100
eCl@ss 7.0 27141125
eCl@ss 8.0 27141125
eCl@ss 9.0 27141125
ETIM
ETIM 2.0 EC000897
ETIM 3.0 EC000897
ETIM 4.0 EC000897
ETIM 5.0 EC001329
ETIM 6.0 EC001329
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / EAC / cULus Recognized
Ex Approvals
Approval details
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page6/17
Installation terminal block-UIK 35-3006182
Approvals
CSA http://www.csagroup.org/services-industries/product-listing/ 13631
Nominal voltage UN 600 V
Nominal current IN 130 A
mm²/AWG/kcmil 18-2
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C
Nominal voltage UN 600 V 600 V
Nominal current IN 115 A 115 A
mm²/AWG/kcmil 18-2 18-2
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C
Nominal voltage UN 600 V 600 V
Nominal current IN 115 A 115 A
mm²/AWG/kcmil 18-2 18-2
EAC EAC-Zulassung
cULus Recognized
Accessories
Accessories
Cover profile
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page7/17
Installation terminal block-UIK 35-3006182
Accessories
Cover-EA 11-1024263
Single cover, for covering one terminal block, snap fit, cannot be labeled, color: transparent
DIN rail
DIN rail perforated-NS 32 PERF 2000MM-1201002
DIN rail perforated, G profile, width:32 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated
with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 32 UNPERF 2000MM-1201015
DIN rail, unperforated, G profile, width:32 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated
with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page8/17
Installation terminal block-UIK 35-3006182
Accessories
DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white
passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated,
length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page9/17
Installation terminal block-UIK 35-3006182
Accessories
DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
End cap-NS 35/ 7,5 CAP-1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page10/17
Installation terminal block-UIK 35-3006182
Accessories
DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum,
uncoated, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page11/17
Installation terminal block-UIK 35-3006182
Accessories
End cap-NS 35/15 CAP-1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel,
galvanized, passivated with a thick layer, length:2000 mm, color:silver
End block
End clamp-CLIPFIX 35-3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp-CLIPFIX 35-5-3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp-E/NS 35 N-0800886
End clamp, width: 9.5 mm, color: gray
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page12/17
Installation terminal block-UIK 35-3006182
Accessories
End clamp-E/UK-1201442
End clamp, width:9.5 mm, height:35.3 mm, material:PA, length:50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color:gray
End clamp-E/UK 1-1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
Insertion bridge
Insertion bridge-EB 10-15-0205135
Insertion bridge, pitch: 15 mm, number of positions: 10, color: gray
Insertion bridge-EB 2-15 K/UK 35-0205119
Insertion bridge, pitch: 15 mm, number of positions: 2, color: gray
Insertion bridge-EB 3-15 K/UK 35-0205106
Insertion bridge, pitch: 15 mm, number of positions: 3, color: gray
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page13/17
Installation terminal block-UIK 35-3006182
Accessories
Insertion bridge-EB 10-15 K/UK 35-0205096
Insertion bridge, pitch: 15 mm, number of positions: 10, color: gray
Insulating sleeve
Insulating sleeve-PS-IH WH-0311566
Insulating sleeve, color: white
Insulating sleeve-PS-IH RD-0311579
Insulating sleeve, color: red
Insulating sleeve-PS-IH BU-0311582
Insulating sleeve, color: blue
Insulating sleeve-PS-IH YE-0311595
Insulating sleeve, color: yellow
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page14/17
Installation terminal block-UIK 35-3006182
Accessories
Insulating sleeve-PS-IH GN-0311605
Insulating sleeve, color: green
Insulating sleeve-PS-IH GY-0311621
Insulating sleeve, color: gray
Insulating sleeve-PS-IH BK-0311634
Insulating sleeve, color: black
Insulating sleeve-PS-IH VT-0311618
Insulating sleeve, color: violet
Labeled terminal marker
Zack marker strip-ZB 15 CUS-0824945
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page15/17
Installation terminal block-UIK 35-3006182
Accessories
Zack marker strip-ZB 15,LGS:L1-N,PE-0811998
Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker
groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm
Partition plate
Separating plate-TS-K-1302215
Separating plate, length: 22 mm, width: 0.5 mm, height: 22 mm, color: gray
Screw bridge
Fixed bridge-FBI 2-15-0201333
Fixed bridge, pitch: 15 mm, number of positions: 2, color: silver
Fixed bridge-FBI 3-15-0201278
Fixed bridge, pitch: 15 mm, number of positions: 3, color: silver
Fixed bridge-FBI 5-15-0711302
Fixed bridge, pitch: 15 mm, number of positions: 5, color: silver
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page16/17
Installation terminal block-UIK 35-3006182
Accessories
Switching jumper
Switching jumper-SBH 2-15-0205232
Switching jumper, pitch: 15 mm, number of positions: 2, color: silver
Terminal marking
Zack marker strip-ZB 15:UNBEDRUCKT-0811972
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm
Test plug terminal block
Test plugs-PS-MT-0311647
Test plugs, color: silver
Test socket
Female test connector-PSB 6/5/6-0205290
Female test connector, color: silver
Warning label printed
https://www.phoenixcontact.com/us/products/3006182
02/06/2019Page17/17
Installation terminal block-UIK 35-3006182
Accessories
Warning label-WS 5-15-1004445
Warning label, Plate, orange, labeled: Lightning flash and warning in English, mounting type: Screws, rivets, for terminal
block width: 15 mm, diameter: 0 mm
Warning label-WS 4-15-1004241
Warning label, Plate, orange, labeled: Lightning flash and warning in English, mounting type: Screws, rivets, for terminal
block width: 15 mm, diameter: 0 mm
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com