02 Push-to-Close Latch 214 Pull-to-open * Magnetic catch * Snap-in * Snap-in installation * Optional side mount bracket Small Medium ACTUAL SIZE 6.1 7.7 (.24) (.30) 7.7 9.2 (.30) (.36) 0.8 (.031) Material and Finish Housing: Pole pieces and mounting bracket: Steel, zinc plated Small, large: Barium ferrite Medium: Strontium ferrite 0.8 (.031) C H 23.6 (.93) C H 39.7 (1.56) 25.4 (1.0) 13.3 (.52) Performance Details Size Average breakaway force Small 300 series 8N (1.8 lbf) Medium 100 series 46 N (10 lbf) Large 200 series 64 N (14 lbf) Double magnet 800 series 105 N (23 lbf) Operating temperature range: -30C (-20F) to 115C (240F) 0.8 (.03) Large 11 (.43) Large double magnet 9.4 (.37) Performance values shown are supplied as a general guide only. 58.5 (2.30) Small Medium 57 (2.24) 0.8 (.03) ACTUAL SIZE Size H 57 (2.24) 0.8 (.03) Large double magnet www.southco.com/02 65 (2.56) 1.2 (.05) 20.6 (.81) Large Other options available. For complete details on variety, part numbers, installation and specification, go to H 58.5 (2.30) 20.6 (.81) Part Number See table 22 20.8 (.86) (.82) C 1.2 (.05) For non-ferrous applications. Screw-mounted and adhesive backed strikes are available. Order separately. See page 217. Notes 37.8 (1.49) ACTUAL SIZE Flammability rating UL94-HB Installation Notes 0.8 (.03) 22 (.87) C H 27.9 (1.10) 0.9 (.035) 26.7 (1.05) 47 (1.85) 46.2 (1.82) ACTUAL SIZE Frame Thickness Magnet Part Number Minimum Maximum Black White 0.5 (.020) 2 (.080) 02-10-301-10 02-10-301-20 2.4 (.095) 2 (.080) 3.6 (.140) 02-10-302-10 02-10-302-20 1 (.040) 0.5 (.020) 2 (.080) 02-10-101-10 02-10-101-20 2.5 (.100) 2 (.080) 3.6 (.140) 02-10-102-10 02-10-102-20 45.5 (1.79) 4 (.160) 3.6 (.140) 5.1 (.200) 02-10-103-10 02-10-103-20 65.3 (2.57) 0.3 (.010) 0.5 (.020) 2 (.080) 02-10-201-10 02-10-201-20 64.5 (2.54) 1.8 (.070) 2 (.080) 3.6 (.140) 02-10-202-10 02-10-202-20 63.3 (2.49) 3.3 (.130) 3.6 (.140) 5.1 (.200) 02-10-203-10 02-10-203-20 ~ 0.3 (.010) 0.5 (.020) 2 (.080) 02-10-801-10 ~ ~ 1.8 (.070) 2 (.080) 3.6 (.140) 02-10-802-10 ~ ~ 3.3 (.130) 3.6 (.140) 5.1 (.200) 02-10-803-10 ~ Dimensions in millimeters (inch) unless otherwise stated 215 Installation R max. 0.4 (.015) 1. Punch rectangular slot * Snap-in installation * Optional side mount bracket 2. Snap catch into slot Installation Notes L W Size L 0.1 (.005) W 0.1 (.005) Small 22.2 (.875) 6.4 (.25) Medium 38.1 (1.50) 8.1 (.32) Large 57.1 (2.25) 9.6 (.38) Double magnet 57.1 (2.25) 21 (.828) Frame thickness Mounting Bracket For applications where frame is not suitable for punching (order separately) B D (measured from C inside surface of door or strike) T A E Attach with two No. 4, No. 5 or M3 screws Size A B C D E 0.1 (.005) Small 41.3 (1.63) 11.1 (.44) 13.5 (.53) 7.92.4 (.31.09) 35 (1.38) Medium 51 (2.00) 12.7 (.50) 24.6 (.97) 17.53.2 (.69.13) 44.5 (1.75) Large 76 (3.00) 14.3 (.56) 18.7 (.73) 12.73.2 (.50.13) 70 (2.75) Large double magnet 76 (3.00) 25.4 (1.00) 18.7 (.73) 12.73.2 (.50.13) 70 (2.75) T 1 (.042) 1.6 (.062) For Use with these Magnets ONLY Bracket Part Number 02-10-301-10 02-10-301-20 02-16-301-11 02-10-101-10 02-10-101-20 02-16-101-11 02-10-201-10 02-10-201-20 02-16-201-11 02-10-801-10 02-16-801-11 Dimensions in millimeters (inch) unless otherwise stated Part Number See table Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/02 02 Push-to-Close Latch 216 Pull-to-open * Magnetic catch * Snap-in * * * * Round hole Snap-in installation Adhesive installation Optional side mount bracket Material and Finish Housing: Polypropylene, black Pole pieces: Steel, zinc plated Magnet: Barium ferrite Series 100 - Part Number 02-30-121-10 Size 100 series 46 N (10 lbf) 200 series 64 N (14 lbf) 300 series 8N (1.8 lbf) 400 series 18.5 N (4.2 lbf) 600 series 49 N (11 lbf) Operating temperature range: -30C (-20F) to 115C (240F) Flammability rating: UL94-HB Pressure- 1.6 sensitive (.06) tape 5.6 (.22) 19 (.75) Contact plane of magnet 44.5 (1.75) 8.7 (.34) 31.8 (1.25) ACTUAL SIZE Small - 400 Series Large - 600 Series O 14.2 (.558) F 10.7 (.42) 50.8 (2.00) ACTUAL SIZE Series 300 Part Number 02-30-321-10 O 22.1 (.870) F O 16 (.63) 0.8 (.031) 21.4 (.84) ACTUAL SIZE 0.8 (.03) O 24.5 (.97) 8 (.31) 1.2 (.048) ACTUAL SIZE 33.5 (1.32) 0.8 (.03) 14 (.55) ACTUAL SIZE Pressure-sensitive tape Installation Installation 1. Drill or punch hole 1. Remove protective paper +0.1 -0.0 +.004 -.00 O 14.3 (.563 ) +0.1 -0.0 +.005 -.00 O 22.3 (.875 Notes: Be sure the mounting surface is clean and capable of retaining a satisfactory adhesive bond ) 2. Place in position Frame thickness Frame thickness 2. Snap catch into hole Size OD Small O 14.3 -0.0 Notes +0.1 (.563 +.004 -.00 ) Part Number +0.1 Large Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/02 28.6 (1.13) 8 (.31) For non-ferrous applications. Screw-mounted and adhesive backed strikes are available. Order separately. See page 217. See table Contact plane of magnet 1.3 (.05) Installation Notes Performance values shown are supplied as a general guide only Pressuresensitive tape 19 (.75) Performance Details Average breakaway force Contact plane of magnet 25.4 (1.00) Series 200 - Part Number 02-30-221-10 Dimensions in millimeters (inch) unless otherwise stated O 22.3 -0.0 (.875 +.005 -.00 ) Frame Thickness Minimum Maximum Magnet Part Number 0.5 (.020) 2 (.080) 02-20-411-10 2.3 (.090) 2 (.080) 3.5 (.140) 02-20-412-10 3.8 (.150) 3.5 (.140) 5 (.200) 02-20-413-10 0.5 (.020) 0.5 (.020) 2 (.080) 02-20-611-10 2 (.080) 2 (.080) 3.5 (.140) 02-20-612-10 3.5 (.140) 3.5 (.140) 5 (.200) 02-20-613-10 F 0.8 (.030) 02 Push-to-Close Latch 217 Steel strikes Self-adhesive For Use with Series Catch Pressure- ACTUAL SIZE sensitive adhesive X 300 400 100 600 200 800 Y Strike Part Number X Y Z 02-14-301-14 24 (.94) 8 (.31) 2 (.08) * Ferrous keepers for magnet catch * Self-adhesive or screw mount 02-14-101-14 32 (1.25) 19 (.75) 2.4 (.094) Material and Finish 02-14-201-14 51 (2.00) 19 (.75) 2.4 (.094) Z Installation Notes ACTUAL SIZE Installation Steel, zinc plated Adhesive: Neoprene foam with acrylic Be sure the mounting surface is clean and capable of retaining a satisfactory adhesive bond. Self-adhesive mounted strikes are designed to function under intermittent break-away loads. Use screw-mounted strikes for continuous load applications. ACTUAL SIZE 1. Position strike on installed catch 2.Remove protective paper. Close door or panel onto strike Part Number See table Screw-Mounted For Use With Series Catch Install with M3 or No. 5 flat head screw Locating prongs X 4.8 (.19) 19 (.75) 2 (.08) 100 600 200 800 Strike Part Number X 02-14-102-11 32 (1.25) 02-14-202-11 51 (2.00) ACTUAL SIZE ACTUAL SIZE Dimensions in millimeters (inch) unless otherwise stated Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/02