DPP480 Series 480W Single Output DIN Rail Mount Power Supplies Features Low Cost 24V or 48V Outputs Wide Range AC Input Active PFC Parallel Function Switch -40 to +71C Operation Convection Cooled Key Market Segments & Applications Specifications Model AC Input Voltage range VAC Input Frequency Hz DC Input Voltage range VDC Inrush Current A Power Factor Input Current A Output Voltage Accuracy % Line Regulation % Load Regulation % Ripple and Noise (20MHz BW) mV Overcurrent Protection (Typ) Overvoltage Protection V Overtemperature Protection Hold Up Time (115VAC input) ms Parallel operation LED Indicators DC Good Relay (24V model only) Operating Temperature C Storage Temperature Operating Humidity Cooling (1) Withstand Voltage Isolation Resistance Vibration (Operating) Shock (Operating) Safety Agency Approvals Conducted & Radiated EMI Immunity Weight (Typ) Size (LxWxH) Size (LxWxH) Case material Warranty C g mm in yrs DPP480-xx-1 90 - 264VAC, single phase 47 - 63Hz 120 - 370VDC* 25 / 50A (115 / 230VAC) Meets EN61000-3-2 Class A 6.9 / 3.3A (115 / 230VAC) -0, +1% of Nominal 0.5% 1% (5% when set in parallel mode) 100mV 110 - 140% See model selector > 35ms Set in parallel (droop) mode - maximum of 3 Green LED = On, Red LED = DC Output Low 0.3A rated normally open relay contacts, closes when output is above 17.6 - 19.4V -40 to +71C (Derate linearly 2.5%/C from 56 to 71C) -40 to +85C 20 - 95% RH (non condensing) Convection Input to Output 3kVAC for 1 min. >100M at 25C & 70%RH, Output to Ground 500VDC IEC 60068-2-6 (Mounting by rail: Random wave, 10-500 Hz, 2G, ea. along X, Y, Z axes 10 min/cycle, 60 min) IEC 60068-2-27 (Half sine wave, 4G, 22ms, 3 axes, 6 Faces, 3 times for each face) UL508 Listed, IEC/UL/CSA/EN62368-1, 60950-1, CE Mark EN55022 class B IEC 61000-4-2, -3, 4, -5, -6. -8, -11 1800g 116 x 175 x 125mm 4.57 x 6.89 x 4.92" Metal Three years (1) Recommend 1" clearance on all sides *Safety certified for AC input only DPP480 Series Model Selector Model Voltage DPP480-24-1 24V DPP480-48-1 48V Adjust. Range 22.5 - 28.5V 47 - 56V Terminal Assignments Output Curr. 20A 10A Overvoltage 30 - 33V 57 - 63V Outline Drawing (DPP480-24-1) Eff. 89% 90% # DPP480-xx-1 1 2 3 4 5 6 7 8 9 10 DC Good relay DC Good relay +V +V -V -V Chassis ground N L No connection Snap-on Mounting: snap onto DIN Rail TS35/7.5 or TS35/15. (no tools required) Options Suffix Description Blank B Non detachable connectors Detachable input and output connectors Other Industrial Products DPP/DSP DLP DLP-PU R Series 10W to 960W, 5V to 48V power supplies 75W to 240W power supplies Redundancy Module (20A) 6A to 1000A single & three phase EMI Filters For Additional Information, please visit https://product.tdk.com/info/en/products/power/index.html Accepts TS35/7.5 or TS35/15 DIN Rails Revision C3: Oct 2020