Model BD60120N50100AHF Rev F Ultra Low Profile 0404 Balun 50 to 100 Balanced Description The BD60120N50100AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output locations on modern chipsets in an easy to use surface mount package for applications including point-to-point radio and wideband GaN. The BD60120N50100AHF is ideal for high volume manufacturing and delivers higher performance than traditional ceramic baluns. The BD60120N50100AHF has an unbalanced port impedance of 50 and a 100 balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern integrated chipsets. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD60120N50100AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25C) Features: Frequency (GHz) * 5.9 - 11.7 GHz * Thin Height Profile Insertion Loss * * * * Mountable Tape & Reel RoHS Compliant Halogen Free -55C to 140C Return loss (dB) Insertion loss (dB) Phase Balance (deg) CMRR (dB) Power Handling (Watts) Unbal. Bal. Typ. Min. Typ. Max. Typ. Max Typ. Max Typ. Max. 5.9-8.5 50 100 22 14 0.4 0.7 0.8 1.3 9 12 21 1@85oC 0.6@105oC 10.0-11.7 50 100 25 14 0.6 0.9 0.9 1.6 7 13 24 1@85oC 0.6@105oC * Ultra Low * Surface Port Impedance Amplitude Balance (dB) * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 C) Outline Drawing Dimensions are in Millimeters Tolerances ere Non-Cumulative Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 233-5510 (833) 389-6402 +44 2392-232392 +86 512 62749282 Model BD60120N50100AHF Rev F Preliminary Typical Performance: 6.0 GHz. to 12.0 GHz. Return Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 -18 -21 -1.8 -2.1 -24 -2.4 -27 -2.7 -30 -3 -33 -3.3 -36 5.5 6.5 8.5 9.5 Freq [GHz] 10.5 11.5 12.5 -3.6 5.5 Amplitude Balance 2 1.5 15 1 10 0.5 5 0 -0.5 -1.5 -15 7.5 6.5 7.5 0 8.5 9.5 10.5 11.5 8.5 9.5 10.5 11.5 Freq [GHz] CMRR 12.5 8.5 9.5 Freq [GHz] 10.5 11.5 12.5 10.5 11.5 12.5 Phase balance -5 -10 6.5 7.5 0 -1 -2 5.5 6.5 20 [degree] [dB] 7.5 Differential insertion loss 0 [dB] [dB] 0 -20 5.5 6.5 7.5 8.5 9.5 Freq [GHz] -5 -10 -15 [dB] -20 -25 -30 -35 -40 -45 -50 5.5 Freq [GHz] 12.5 Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 233-5510 (833) 389-6402 +44 2392-232392 +86 512 62749282 Model BD60120N50100AHF Rev F Preliminary Wide Band Performance: 4.0 GHz. to 14.0 GHz. Return Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 -18 -21 -2.1 -2.4 -27 -2.7 -30 -3 -33 -3.3 4 5 7 6 12 11 10 9 8 Freq [GHz] 13 14 -3.6 Amplitude Balance 2 4 1.5 15 1 10 0.5 5 0 -0.5 -1.5 -15 5 6 7 8 9 10 11 Freq [GHz] 12 13 14 -20 CMRR 0 7 8 9 10 Freq [GHz] 11 12 13 14 11 12 13 14 Phase balance -5 -10 4 6 0 -1 -2 5 20 [degree] [dB] -1.8 -24 -36 Differential insertion loss 0 [dB] [dB] 0 4 5 6 7 8 9 10 Freq [GHz] -5 -10 -15 [dB] -20 -25 -30 -35 -40 -45 -50 4 5 6 7 8 9 10 Freq [GHz] 11 12 13 14 Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 233-5510 (833) 389-6402 +44 2392-232392 +86 512 62749282 Model BD60120N50100AHF Rev F Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. With No DC Bias With DC Bias Plated thru hole to ground .33 3x Transmission Line 3x 0.25 Plated thru holes to ground 3x Transmission Line 3x .29 .33 3x .29 3x 0.25 0.50 .22 .50 0.30 0.25 .22 .50 0.25 Circuit pattern Footprint Pad(s) Solder Resist 0.50 Dimensions are in Millimeters Recommended mounting footprint for 8mil thick, Dk 3.25 PCB Circuit Pattern Footprint Pad (s) Solder Resist Visit us at www.anaren.com Dimensions are in Millimeters Mounting Footprint USA/Canada: Toll Free: Europe: Asia: (315) 233-5510 (833) 389-6402 +44 2392-232392 +86 512 62749282 Model BD60120N50100AHF Rev F Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. 2.00.05 4.00.10 .20.02 1.75.10 B 1.21.05 8.00+.30 -.10 A A 1.1096 4.00.10 B 3.50.05 Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: .78.05 (315) 233-5510 (833) 389-6402 +44 2392-232392 +86 512 62749282