Cataleg 130/797 Revised 10-03 RF Coax Connectors ANP SSMT Surface Mount Interconnect System (Continued) Inter-Series Cable Assemblies Notes: 1. Consult AMP for non-standard cable lengths: length A Tolerances. Length A Tolerance 50 To 100 (3.94) 3 {+.12) 101 To 500 (3.98 ta 19 89) +5 (+ 20) Over 500 (19.69) 410 {4 39) 2. Connectors are randomly aligned unless cthenwise noted. 3. SSMT Jack is nat mateable with OSMT High Retention Plug receptacle (1055690-11. SMA Straight Plug a) | 3.4 Length A 139] Pt Assembly Length (A) MiA-COM Modal No. Part No. Reterence Plane to Centerline a 100 [4 0] 9960-4100-01 1064543-1 = 19.2 Ref} 1.3 Dia. Ref) 24 - [787] [D62] Cable | pear) PEt 200 [8.0] 9960-4200-01 1064552-1 j 305 [12.0] 9960-4505-01 1064560-1 a -.7 SSM} Hight | on ae a Angle Jack | Note: L100) Dia Rat l=: 1064552-} recommended for customer system verification. SMA Bulkhead Jack am} | 24 Rel. Length & [132] Heterence Fiane to Centerline =e (238i Ret. --= (082) 24 54 Dia. Assembly Lengih (A) M/A-COM Model No. Part No. bia mer, | post [,250, Min. 100 [4.0 9860-4 100-02 1064544-1 if Cabie 1 TS 200 [8.0 9960-4200-02 1064553-1 a =a _ CLA 305 [12.0] 9860-4305-02 1064561-1 60 | / A 25 Dia Ret. __| L [235] fe a 52h Hex. [100] . , Min. |__| 3-2 Max. Panel seu fone Recommended [.125] Thickress 3 Mounting Hole SMB Straight Plug Length & | 34 Re. 132) aa comeing | 1132) Assembly Length (A) M/A-GOM Modal No. Part No. (aaa) et 1.0821 21 Get 100 14.0] 9960-4 100-03 1064545-1 _ Da. Ret [081] 200 18.6] 9960-4200-03 1064554-1 abe SMT Right 305 [12.0] 9960-4305-03 1064562-1 I | oF Angle Jack 25 pia Ref. +l | Lien] ia. Ref. Technical Suppor Center/AMP FAX Service 1-890-522-6752 717-986-7777 Dimensions are in millimeters over [inches] www. amp. com/communications/com 219 Specifications subject to change.