ISOCOM LTD (R) IECQ-CECC QC 88000-C001 COMPONENT ISSUE 6 SPECIFICATION March 2007 Component Specification For Ceramic Hermetically Sealed Transistor Optocouplers Up-to-date lists and bibliographical references of IEQC-CECC publications may be downloaded from www.iecq.org Further copies of this document may be obtained from: IEC International Electrotechnical Commission Commission Electrotechnique Internationale Box 131, rue de Varembe, CH 1211 Geneva 20, Switzerland For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 1 of 12 QC 88000-C001: 2007 ISOCOM LTD (R) FOREWORD The IECQ Quality Assessment System for Electronic Components (IECQ) is composed of those member countries of the International Electrotechnical Commission (IEC) who wish to take part in a harmonized system for electronic components of assessed quality. IECQ is also known in some European member countries as IECQ-CECC. The object of the System is to facilitate international trade by the harmonization of the specifications and quality assessment procedures for electronic components, and by the grant of an internationally recognised Mark, or Certificate of Conformity. The components produced or services provided under the system are thereby acceptable in all member countries without further testing. This Component Specification is based upon the requirements of IEC Publication QC 001002-2, and has been prepared by: Isocom Ltd Hutton Close Crowther Industrial Estate Washington Tyne and Wear NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 and published under the authority of: BSI Product Services Maylands Avenue Hemel Hempstead Hertfordshire HP2 4SQ United Kingdom AMENDMENT RECORD Issue 1 - Changed Page 10 - Amendments 25/06/10 Issue 2 - Changed Page 4 - Amendments 22/03/10 Issue 3 - Changed Pages 4 & 6 - Updated Drawings 25/06/10 Issue 4 - Changed Pages 3 & 4 - Added devices IS49 & 4N49 05/07/10 Issue 5 - Changed Pages 3, 4, 5, 6, 7 & 10 - RoHS Compliant, Added CSM165-2 & Amendments 13/07/10 REQUIREMENTS The requirements for IECQ-CECC Component Specifications as detailed in QC 001002-2 Amendment 1 clause 5.4 are satisfied by the following data sheet. It should note that IECQ-CECC are not responsible for manufacturers declarations made in data sheets which fall outside the limits of approved detailed in IECQ-CECC certificates. This Component Specification is intended for use with applicable IECQ-CECC Assessment Specifications. Eg: QC 88000-A0001 For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 2 of 12 QC 88000-C001: 2007 ISOCOM LTD (R) Ceramic Hermetically Sealed Transistor Optocouplers 4N24 4N49 CD500/501 CH300 CS200/201 CS224 CSM200 CSM1200 CSM1224 CSM165-2 CSM165-4 CSM2224 IS49 Features Applications Release to IECQ-CECC Military, high reliability system Hermetically Sealed Medical instruments High Density Packaging Mos, Cmos Applications 1500V DC withstand Test Voltage Logic Interfacing Low Input Requirements Data Transmission High Current Transfer Ratio Power Supply RoHS Compliant Modems Description These devices are single, dual and quad, hermetically sealed optocouplers. Each channel is composed of an infra-red emitting diode and a silicon phototransistor. Package styles for these devices include 6 pin, 8 pin, 16 pin flat pack, and hybrid 4 pin, with surface mount, butt cut and gull wing options available. The same electrical die, assembly processes and materials are used for each channel of each device shown below. Therefore absolute maximum ratings, recommended operating conditions, electrical specifications and performance characteristics are identical for all units. Any exceptions, due to packaging variations and limitations, are as noted. For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 3 of 12 QC 88000-C001: 2007 ISOCOM LTD (R) Selection Guide Package Styles and Configuration Options 4 pin Hybrid Package Lead Style Channels 1 Common Channel Wiring Isocom Part Numbers and Options Commercial CH300 Defense Screen Level CH300/L2 Space Screen Level Standard Gold Plate Finish Solder Dipped Butt Cut/Gold Plate Gull Wing/Soldered Crew Cut/Gold Plate CH300/L2S 6 pin Metal Can TO-5 6 pin LCC 6 pin DIP 8 pin DIP 16 pin Flat Pack 1 1 1 2 2/4 4N24 4N49 4N24/L2 4N49/L2 4N24/L2S 4N49/L2S Gold Plate CSM200, IS49 CSM1200/1244/2224 CSM200/L2, IS49/L2 CSM1200/1244/2224/L2 CSM200/L2S, IS49/L2S CSM1200/1244/2224/L2S Gold Plate CS200/201 CS224 CM200/201/L2 CS224/L2 CS200/201/L2S CS224/L2S Gold Plate Option 20 Option 10 Option 30 Option 60 CD500 CD501 CD500/L2 CD501/L2 CD500/L2S CD501/L2S Gold Plate Option 20 Option 10 Option 30 Option 60 CSM165 CSM165/L2 CSM165/L2S Gold Plate Functional Diagrams CH300 CS200/201 CSM200 CSM1224 IS49 CD500 CD501 CSM165-2 4 pin Hybrid 1 Channel 6 pin DIP 1 Channel 6 pin LCC 1 Channel 6 pin LCC 1 Channel 8 pin DIP 2 Channel 16 pin Flat Pack *2 Channel 1 6 6 5 2 5 1 4 4 3 4N24 4N49 CS224 CSM1200 CSM2224 CSM165-4 6 pin TO-5 1 Channel 6 pin DIP 1 Channel ** 6 pin LCC 1 Channel 6 pin LCC 1 Channel 16 pin Flat Pack 4 Channel 5 6 3 2 1 7 1 5 6 4 1 4 3 3 * ** 5 Note 2 channel is only for circuit of 2 middle channels 2 & 3 channel on the circuits. See Outline Drawings 6 Terminal LCC Surface Mount, 1 Channel For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 4 of 12 QC 88000-C001: 2007 ISOCOM LTD (R) Outline Drawings 16 pin Flat Pack, 2 and 4 Channel 7.24 (0.285) 6.99 (0.275) 2.29 (0.09) max 11.13 (0.438) 10.72 (0.422) 1.27 (0.05) Ref 0.46 (0.018) 0.36 (0.014) 8.13 (0.32) Max 2.85 (0.112) Max 0.88 (0.0345) Min 0.89 (0.035) 0.69 (0.027) 5.23 (0.206) Max 0.31 (0.012) 0.23 (0.009) 9.02 (0.355) 8.76 (0.345) NOTE: DIMENSIONS IN MILLIMETERS 8 pin DIP 2 Channel 9.40 (0.370) 9.91 (0.39) 8.13 (0.32) Max 0.76 (0.03) 1.27 (0.05) 7.16 (0.282) 7.57 (0.298) 0.51 (0.020) Min 3.81 (0.15) Min 2.29 (0.09) 2.79 (0.11) 4.32 (0.17) Max 0.51 (0.02) Max 0.2 (0.008) 0.33 (0.013) 7.36 (0.29) 7.87 (0.31) NOTE: DIMENSIONS IN MILLIMETERS For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 5 of 12 QC 88000-C001: 2007 ISOCOM LTD (R) 6 pin TO-5, 1 Channel 6 LEADS 0.0175 (0.445) 0.040(1.02) 45. 0 0.32 (8.13) 5 3 0.037 (0.935) 6 7 2 1 0.5 (12.70) 0.022 (5.08) 0.031 (0.787) 0.17 (4.32) 6 pin DIP 1 channel 8.94 9.34 7.62 8.12 2.8 MIN 1.37 TYP 0.22 0.3 7.16 7.56 0.63 1.14 3.5 MIN 2.54 0.4 0.5 NOTE: DIMENSIONS IN MILLIMETERS 6 Terminal LCC Surface Mount, 1 Channel 6.223 1.67 1.651 2.286 0.635 4.318 1.27 2.54 0.762 0.635 R = 0.2286 ** For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 6 of 12 QC 88000-C001: 2007 ISOCOM LTD (R) Device Marking XXXXXXX Isocom Part Number ISOCOM Manufacturer XXXX Date Code (XX year XX week) For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 7 of 12 QC 88000-C001: 2007 ISOCOM LTD (R) Hermetic Optocoupler Options Option 10 Description Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on commercial hi-rel product in 8 and 16 pin DIP 4.32 (0.17) Max 0.51 (0.02) Min 1.14 (0.045) 1.40 (0.055) 2.29 (0.09) 2.79 (0.11) 0.51 (0.02) Max 4.32 (0.17) Max 0.51 (0.2) Min 2.29 (0.09) 2.79 (0.11) 0.51 (0.02) Max 0.2 (0.008) 0.33 (0.013) 7.36 (0.29) 7.87 (0.31) 1.14 (0.045) 1.40 (0.055) 20 30 Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is available on commercial and hi-rel product in 8 and 16 pin DIP. 4.57 (0.18) Max 0.51 (0.02) Min 2.29 (0.9) 2.79 (0.11) 5 deg 4.57 (0.18) Max Max 0.51 (0.02) Min 2.29 (0.09) 2.79 (0.11) 60 1.4 (0.055) 1.65 (0.065) 0.51 (0.02) Max 4.57 (0.18) Max 0.2 (0.008) 0.33 (0.013) 1.4 (0.055) 1.65 (0.065) 0.51 (0.02) Max 9.65 (0.38) 9.91 (0.39) Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on commercial hi-rel product in 8 and 16 pin DIP 3.81 (0.15) Min 0.51 (0.02) Min 2.29 (0.09) 2.79 (0.11) 3.81 (0.15) Max 0.2 (0.008) 0.33 (0.013) 7.36 (0.29) 7.87 (0.31) 1.14 (0.045) 1.25 (0.049) 0.51 (0.02) Min 2.29 (0.09) 2.79 (0.11) 1.02 (0.04) Typ For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 8 of 12 QC 88000-C001: 2007 ISOCOM LTD (R) Absolute Maximum Ratings Storage Temperature Operating Temperature Lead Soldering Temperature Input-to-Output Isolation Voltage -65C to +150C -55C to +125C 260C 1.6mm from case for 10S 1500VDC 500VDC for CH300 Input Diode Forward DC Current Reverse DC Voltage Peak forward Current Power Dissipation 50mA 15mA 7V 5V 3V 2V 1.5mA 100mW 150mW 25mW For CH300 For CH300 For CSM165 For CS224 10S duration Derate linearly above 100C at 1.6W/C. For CD500/501 andCSM165. Derate linearly above 100C at 1.4W/C for CD500/501, and at 1.6 W/C for CSM165 For CH300 Output Transistor Collector-Emitter Voltage Emitter-Collector Voltage Collector-Base Voltage Collector Current Collector Current Power Dissipation 50V 30V 35V 7V 70V 35V 50mA 20mA 100mA 100mW 150mW BVCEO For CH300 For CS224 BVECO BVCBO For CS200/201 and CS224 For CS224 For CH300 t = 1mS For CH300. Derate linearly above 100C at 1.4W/C For CS200/201, CS224, CD500/501 and CSM165. Derate linearly above 100C at 1.4W/C For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 9 of 12 QC 88000-C001: 2007 ISOCOM LTD (R) Electrical Characteristics TA = 25C U.O.S. (each channel where appropriate). Input Diode Electrical Characteristics Parameter Forward Voltage Symbol VF Reverse Breakdown Voltage Reverse Current Capacitance VR Test Conditions IF = 10mA IF = 10mA, TA = 125C IF = 10mA, TA = -55C IR = 0.1mA IR CIN VR = 3V V = 0, f = 1MHz Device Min 0.7 0.7 0.7 5 Type 1.18 1.10 1.29 - Max 1.8 1.8 1.8 - Units V (note 4) - 25 100 - A pF 40 30 - - V V Output Detector Electrical Characteristics Collector-Emitter Breakdown Voltage (See note 1 below) Collector-Base Breakdown Voltage (See note 1 below) Emitter-Collector Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Emitter Leakage Current BVCEO IC = 1mA CH300 BVCBO IB = 0.1mA 70 - - V BVECO IE = 0.1mA 7 - - V BVEBO IB = 0.1mA 5 - - V ICEO VCE = 20V, IF = 0 VCE = 15v IF = 0 VCE = 20V, IF = 0, TA = 125C - 6 100 A - 8 100 A 50 100 50 50 35 - - % - - 0.4 1500 3 11 10 - 250 0.3 0.9 0.25 5 - 500 - 4.0 5.0 0.7 5.0 9 25 CSM165 Coupled Electrical Characteristics DC Current Transfer Ratio (See note 3) IC/IF Optical Crosstalk Collector-Emitter Saturation Voltage ICEOX VCE (Sat) Input to Output Capacitance Input to Output Resistance Isolation Voltage CIO RIO VIO IF = 10mA, VCE = 5V IF = 10mA, VCE = 5V, TA = 125C IF = 10mA, VCE = 5V, TA = -55C IF = 10mA, VCE = 5V; TA = -55C-125C VCE = 15v, , IF2-4 = 10mA. IF = 10mA, IC = 2.5mA IF = 10mA, IC = 10mA IF = 2mA, IC = 0.2mA VIO = 0, f = 1mhz (See note 2 below) VIO = 500V (See note 2 below) (See note 2 below) CS201 CS201 CS201 CSM165 CSM165 CH300 CH300 Delay Time Rise Time Storage Time Fall Time Turn -on Time Turn-off Time Notes: td tr ts tf ton toff VCC = 5V, IC = 2mA RL = 100Ohms VCC = 5V, If = 5mA RL = 1KOhms A V pF VDC S S S S S S 1. BVCEO and BVCBO can be selected to suit customer specifications. 2. Measured between input when leads 1, 2 and 3 are shorted together and output when leads 4, 5 and 6 are shorted together. 3. A higher CTR can be selected to suit customer specification as a standard part. 4. For Radiation Tolerant VF max = 2.0v For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 10 of 12 QC 88000-C001: 2007 ISOCOM LTD (R) Electrical Characteristics For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 11 of 12 QC 88000-C001: 2007 ISOCOM LTD (R) For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 (c)2007 Copyright reserved to Isocom Limited Page 12 of 12 QC 88000-C001: 2007